虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

paper

  • CPCI_E标准规范 CompactPCI® Express Specification

    CPCI_E标准规范 CompactPCI® Express SpecificationThe documents in this section may be useful for reference when reading the specification. The  revision listed for each document is the latest revision at the time this specification was published.  Newer revisions of these documents may exist, so refer to the newest revision. Many of these  documents are referenced throughout this specification. Refer to the newest revision of the  document unless a specific revision is referenced. • PCI Express Base Specification 3.0. PCI Special Interest Group (PCI-SIG). • PCI Express Card Electromechanical (CEM) Specification 3.0. PCI Special Interest Group  (PCI-SIG). • PCI Express to PCI/PCI-X Bridge Specification, Rev. 1.0. PCI Special Interest Group  (PCI-SIG). • PCI Express Jitter White paper. PCI Special Interest Group (PCI-SIG). • PCIe Rj Dj BER White paper. PCI Special Interest Group (PCI-SIG). • PHY Electrical Test Specification for PCI Express Architecture. PCI Special Interest Group  (PCI SIG). • System Management Bus (SMBus) Specification, Version 2.0. Smart Battery System  Implementer’

    标签: CPCIE

    上传时间: 2022-02-23

    上传用户:

  • 一种智能红外避障自动扫地机器人的设计

    研究一种智能扫地机器人。从硬件系统控制模块设计到主要技术调试进行了较详细的阐述。以STM32单片机为控制核心与电机驱动、红外线路径识别模块等相互协调应用。进行电路搭建和程序编写。实现了智能扫地机器人红外线避障和自动扫地功能,其清扫面积能达到约70%,清扫率约60%,很大程度受到自身机械机构的限制,后期将对小车的机械结构进行完善。This paper studies an intelligent sweeping robot.From the hardware system control module design to the main technical debugging are described in detail.STM32 MCU is used as the control core to coordinate with motor drive and infrared path recognition module.Conduct circuit building and programming.The functions of infrared obstacle avoidance and automatic sweeping of intelligent sweeping robot are realized.Its cleaning area can reach about 70%and the cleaning rate is about 60%.Because it is limited by its own mechanical mechanism to a great extent,the mechanical structure of the car will be improved in the later stage.

    标签: 扫地机器人

    上传时间: 2022-03-26

    上传用户:

  • 智能温室大棚控制系统设计

    近年来反季节种植已成火热趋势,温室大棚的普及十分迅速,而温室大棚对自动化、智能化的要求也越来越迫切,本系统将温室大棚的温湿度、二氧化碳浓度各个方面的检测,通风、浇灌、温度、喷洒农药等各个方面的控制进行综合系统研究,实现温室大棚对自动化、智能化的要求。这一系统是基于单片机控制的智能检测,控制系统包含单片机主控模块、感应检测模块、传感模块,显示、控制模块等[1]。从而提高温室大棚的种植效率,减少劳动力,提高利润等。In recent years,counter-season planting has become a hot trend featuring the rapid popularization of greenhouse and urgent requirement for the automation and intellectualization of greenhouse.This paper offers a comprehensive and systematic study of the monitoring of temperature,humidity and carbon dioxide concentration in the greenhouse and the control of ventilation,irrigation,temperature and pesticide spraying in order to achieve automation and intellectualization in greenhouse.This system is based on the intelligent detection controlled by single chip computer with the control system including the main control module,induction detection module,sensing module,display and control module of single chip computer,which is effective in improving planting efficiency of greenhouse,reducing labor force and increasing profits.

    标签: 智能温室大棚 控制系统

    上传时间: 2022-03-27

    上传用户:

  • B型剩余电流保护器设计

    随着光伏发电系统快速发展,以及电动汽车充电桩的普及,传统的剩余电流保护器无法满足实际需求。介绍了一款B型剩余电流保护器,采用磁调制剩余电流互感器和零序电流互感器采集剩余电流。根据GB/T 22794—2017标准要求,可识别1 kHz及以下的正弦交流、带和不带直流分量的脉动直流、平滑直流等剩余电流信号。经信号调理电路将电压信号送到单片机进行采集和判断。通过试验测试,该样机在测试精度和速度上均符合国家标准的相关要求。The rapid development of photovoltaic power generation systems and the popularity of electric vehicle charging piles make the traditional residual current protective devices unable to meet the actual demand.This paper proposed a type B residual current protective device,which uses the magnetically modulated residual current transformer and the zero sequence current transformer to acquire the residual current.According to the requirements of GB/T 22794—2017,the type B residual current protective device can detect sinusoidal AC residual current of 1kHz and below 1kHz,pulsating DC residual current with and without DC component,smooth DC residual current and so on.The signal processing circuit sends the voltage signal to the MCU for acquisition and judgment.Through experimental tests,the device meets the relevant requirements of national standards in terms of test accuracy and speed.

    标签: 电流保护器

    上传时间: 2022-03-27

    上传用户:

  • 多功能电子药箱的设计与实现

    基于药物治疗在临床治疗中的重要性,分析目前服药提醒装置存在的不足,以STM32F103VET6单片机为控制核心,设计了一种多功能电子药箱。该系统包括显示模块、语音模块和数据存储模块。显示模块通过触摸屏电路和LED指示灯电路,与语音模块相配合,实现了服药提醒及指导的功能;数据存储模块通过EEPROM存储电路,能够实现掉电时服药信息不丢失的功能。并且为了实现电子药箱的智能化控制,开发了手机APP,两者之间可通过WIFI进行数据通信。经测试,该药箱能够有效地帮助慢性病患者按时、定量、正确服用药物,适合在家庭中推广使用,具有较高的应用价值和实践意义。Based on the importance of drug therapy in clinical treatment, this paper analyzes the shortcomings of current drug reminder devices, and designs a multi-function electronic medicine box with STM32 F103 VET6 microcontroller as the control core. The system includes a display module, a voice module, and a data storage module. The display module cooperates with the voice module through the touch screen circuit and the LED indicator circuit to realize the function of reminding and guiding the medicine;the data storage module can realize the function of not losing the medication information when the power is off through the EEPROM storage circuit.After testing, the medicine box can effectively help chronic diseases patients to take drugs on time, in a quantitative and correct manner,and is suitable for popularization in the family, and has high application value and practical significance.

    标签: 电子药箱

    上传时间: 2022-03-27

    上传用户:

  • 基于单片机的红外测温装置设计

    温度控制如今已成为当代社会研究的热点之一,而温度检测在现代设备参数检测中也是一项极其重要的技术,应用十分广泛。与传统的测温方法相比,红外测温方法具有时间短、精度高、使用简单方便等优点。本文以环境温度为被测对象,设计了以STC89C52单片机为控制中心的红外测温装置,能够实现对目标温度的实时采集、处理、显示和报警等功能。本设计主要是由STC89C52单片机、红外测温传感器、LCD1602液晶显示器、按键和蜂鸣器等部分组成,采用非接触的方式对目标温度进行实时检测。Temperature control has become one of the hotspots in contemporary social research,and temperature detection is an extremely important technology in modern equipment parameter detection.Compared with traditional method,the infrared temperature measuring method has advantages of short time,high precision and convenient operation,etc.This paper consider environment temperature as research objects and designs an infrared temperature measuring device which employs the STC89C52singlechipas-control center,and it can realize timely collection,processing,display and alarm function of the target temperature.The design is mainly composed of STC89C52 singlechip,infrared temperature sensor,LCD1602monitor,keys and buzzer,etc.This design detects the target temperature by non-contact method.

    标签: 单片机 红外测温

    上传时间: 2022-03-27

    上传用户:jiabin

  • 基于单片机和人体红外线传感器自动关门锁门的装置

    入室抢劫事件屡见不鲜,针对此现象进行分析不难发现,造成失窃事件的极大原因是人们慵懒和意识差等不良性格造成习惯性不锁门.本文以STC89C52单片机为基础,设计了一种基于人体红外传感器的自动关门锁门装置,来解决此类问题.The incidents of burglary are so common. It is not difficult to find that the main reason for the burglary is the habit of unlocking of doors caused by people's laziness and poor consciousness. Based on the single chip microcomputer of STC89C52, a device used with infrared sensor of human body is introduced in this paper, which can achieve the effect of automatic closing and locking doors.

    标签: 单片机 人体红外线传感器

    上传时间: 2022-03-27

    上传用户:canderile

  • 基于MC9S12XS128单片机的CAN总线通信节点设计

    CAN总线是汽车上应用最广泛的车载网络总线,具有实时性强、可靠性高、成本低等优点。鉴于此,介绍了一种利用飞思卡尔系列单片机MC9S12XS128作为控制器,利用其内部的MSCAN模块、CAN收发器TJA1040等外围元件进行CAN总线通信节点设计。该设计能够实现CAN总线数据的发送与接收,可应用于汽车及其他各种CAN总线通信系统。CAN bus is the most widely used on-board network bus in automobiles. It has the advantages of realtime, high reliability and low cost. In view of this,this paper introduces the design of CAN bus communication node by using Freescale MC9S12XS128 as controller,using its internal MSCAN module,CAN transceiver TJA1040 and other peripheral components. This design can realize the sending and receiving of CAN bus data,and can be used in automobile and other CAN bus communication systems.

    标签: 单片机 can总线 通信

    上传时间: 2022-03-27

    上传用户:

  • 基于STM32单片机控制的智能水杯设计

    本设计介绍了一种基于STM32单片机控制的智能水杯,可利用插口式电源或无线充电底座为加热器提供能量,并在达到某种饮品所需温度时进行保温。水杯内置充电电池,可选用USB接口或无线充电。在水杯内部设置无线模块,用户利用手机App与水杯进行匹配进行加热操作,加热完后水杯会通过手机App和液晶显示屏实时反馈液体温度,通过指示灯显示电量情况等,给用户进行提醒。该智能水杯设计创新,实用价值较高。This paper introduces an intelligent water cup based by STM32 microcontroller,it can provide energy for the heater by socket type power supply or wireless charging base,and hold temperature needed for some kind of drink.Builtedin rechargeable battery,water cup can use USB or wireless charging.The wireless module is set up inside it,and customers can use mobile App to match and heat.After heating,water cup feeds back liquid temperature through the mobile App,and then displays on LCD,reminds users through the indicator light.The intelligent water cup is designed innovatively and has high practical value.

    标签: stm32 单片机

    上传时间: 2022-03-28

    上传用户:

  • 基于单片机智能家居设计

    文章提出了一种基于AT89S51单片机的智能家居系统的设计,该系统具有室内煤气以及烟雾的检测、家庭室内防盗等功能。文章详细分析了系统的总体设计,详尽分析并设计了煤气传感器模块、烟雾传感器模块、人体红外感应传感器模块、报警模块等各硬件部分,并利用PROTUES软件进行了系统仿真。仿真结果证明:系统具有成本低、效率高、操作方便等优点,达到了预期设计的效果。This paper presents the design of an intelligent home system based on AT89S51 microcontroller.The system has the functions of detecting indoor gas and smoke,guarding against theft in the home,and so on.The overall design of the system is analyzed in detail.The gas sensor module,smoke sensor module,human infrared sensor module,alarm module and other hardware parts are analyzed and designed in detail,and the system simulation is carried out using PROTUES software.The simulation results show that the system has the advantages of low cost,high efficiency,convenient operation and so on,and achieves the expected design effect.

    标签: 单片机 智能家居

    上传时间: 2022-03-28

    上传用户: