📄 one.pin
字号:
-- Copyright (C) 1991-2007 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCC_INT : Dedicated power pin, which MUST be connected to VCC (5.0V).
-- VCC_IO : Dedicated power pin, which MUST be connected to VCC (Refer to
-- the table below for voltage).
-- GND : Dedicated ground pin, which MUST be connected to GND.
-- GND+ : Unused input. This pin should be connected to GND. It may also
-- be connected to a valid signal on the board (low, high, or
-- toggling) if that signal is required for a different revision
-- of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
-- RESERVED_INPUT : Pin is tri-stated and should be connected to the board.
------------------------------------------------------------------------------
Quartus II Version 7.2 Build 151 09/26/2007 SJ Full Version
CHIP "one" ASSIGNED TO AN: EPF10K10LC84-4
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
clk_50M : 1 : input : TTL : : : Y
clk2 : 2 : input : TTL : : : Y
clr : 3 : input : TTL : : : Y
VCC_INT : 4 : power : : 5.0V : :
k1 : 5 : input : TTL : : : Y
k2 : 6 : input : TTL : : : Y
k3 : 7 : input : TTL : : : Y
led_b[7] : 8 : output : TTL : : : Y
led_b[6] : 9 : output : TTL : : : Y
led_b[5] : 10 : output : TTL : : : Y
led_b[4] : 11 : output : TTL : : : Y
DATA0 : 12 : input : : : :
DCLK : 13 : bidir : : : :
nCE : 14 : input : : : :
TDI : 15 : input : : : :
led_b[3] : 16 : output : TTL : : : Y
led_b[2] : 17 : output : TTL : : : Y
led_b[1] : 18 : output : TTL : : : Y
led_b[0] : 19 : output : TTL : : : Y
VCC_INT : 20 : power : : 5.0V : :
ledout[7] : 21 : output : TTL : : : Y
ledout[6] : 22 : output : TTL : : : Y
ledout[5] : 23 : output : TTL : : : Y
ledout[4] : 24 : output : TTL : : : Y
ledout[3] : 25 : output : TTL : : : Y
GND_INT : 26 : gnd : : : :
RESERVED_INPUT : 27 : : : : :
RESERVED_INPUT : 28 : : : : :
ledout[2] : 29 : output : TTL : : : Y
ledout[1] : 30 : output : TTL : : : Y
MSEL0 : 31 : input : : : :
MSEL1 : 32 : input : : : :
VCC_INT : 33 : power : : 5.0V : :
nCONFIG : 34 : input : : : :
ledout[0] : 35 : output : TTL : : : Y
RESERVED_INPUT : 36 : : : : :
RESERVED_INPUT : 37 : : : : :
RESERVED_INPUT : 38 : : : : :
RESERVED_INPUT : 39 : : : : :
VCC_INT : 40 : power : : 5.0V : :
GND_INT : 41 : gnd : : : :
GND+ : 42 : : : : :
GND+ : 43 : : : : :
GND+ : 44 : : : : :
VCC_INT : 45 : power : : 5.0V : :
GND_INT : 46 : gnd : : : :
RESERVED_INPUT : 47 : : : : :
RESERVED_INPUT : 48 : : : : :
RESERVED_INPUT : 49 : : : : :
RESERVED_INPUT : 50 : : : : :
RESERVED_INPUT : 51 : : : : :
RESERVED_INPUT : 52 : : : : :
RESERVED_INPUT : 53 : : : : :
RESERVED_INPUT : 54 : : : : :
nSTATUS : 55 : bidir : : : :
TRST : 56 : input : : : :
TMS : 57 : input : : : :
RESERVED_INPUT : 58 : : : : :
RESERVED_INPUT : 59 : : : : :
RESERVED_INPUT : 60 : : : : :
RESERVED_INPUT : 61 : : : : :
RESERVED_INPUT : 62 : : : : :
VCC_INT : 63 : power : : 5.0V : :
RESERVED_INPUT : 64 : : : : :
RESERVED_INPUT : 65 : : : : :
RESERVED_INPUT : 66 : : : : :
RESERVED_INPUT : 67 : : : : :
GND_INT : 68 : gnd : : : :
RESERVED_INPUT : 69 : : : : :
RESERVED_INPUT : 70 : : : : :
RESERVED_INPUT : 71 : : : : :
RESERVED_INPUT : 72 : : : : :
RESERVED_INPUT : 73 : : : : :
TDO : 74 : output : : : :
nCEO : 75 : output : : : :
CONF_DONE : 76 : bidir : : : :
TCK : 77 : input : : : :
RESERVED_INPUT : 78 : : : : :
RESERVED_INPUT : 79 : : : : :
RESERVED_INPUT : 80 : : : : :
RESERVED_INPUT : 81 : : : : :
GND_INT : 82 : gnd : : : :
RESERVED_INPUT : 83 : : : : :
GND+ : 84 : : : : :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -