📄 fdwt_all.pin
字号:
-- Copyright (C) 1991-2002 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- N.C. : No Connect. This pin has no internal connection to the device.
-- VCC_INT : Dedicated power pin, which MUST be connected to VCC (2.5V).
-- VCC_IO : Dedicated power pin, which MUST be connected to VCC (Refer to
-- the table below for voltage).
-- GND : Dedicated ground pin, which MUST be connected to GND.
-- GND+ : Unused input. This pin should be connected to GND. It may also
-- be connected to a valid signal on the board (low, high, or
-- toggling) if that signal is required for a different revision
-- of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
------------------------------------------------------------------------------
CHIP "FDWT_ALL" ASSIGNED TO AN: EP20K400EBC652-1X
GND : A1 :
GND* : A2 : : :
GND* : A3 : : :
GND* : A4 : : :
GND* : A5 : : :
GND* : A6 : : :
GND* : A7 : : :
GND* : A8 : : :
GND* : A9 : : :
GND* : A10 : : :
GND* : A11 : : :
GND* : A12 : : :
GND* : A13 : : :
GND* : A14 : : :
GND* : A15 : : :
GND* : A16 : : :
VCC_INT : A17 :
GND : A18 :
VCC_INT : A19 :
GND* : A20 : : :
GND* : A21 : : :
GND* : A22 : : :
GND* : A23 : : :
GND* : A24 : : :
GND* : A25 : : :
GND* : A26 : : :
GND* : A27 : : :
GND* : A28 : : :
GND* : A29 : : :
GND* : A30 : : :
GND* : A31 : : :
GND* : A32 : : :
GND* : A33 : : :
GND* : A34 : : :
GND : A35 :
GND : B1 :
GND : B2 :
GND* : B3 : : :
GND* : B4 : : :
GND* : B5 : : :
GND* : B6 : : :
GND* : B7 : : :
GND* : B8 : : :
GND* : B9 : : :
GND* : B10 : : :
GND* : B11 : : :
GND* : B12 : : :
GND* : B13 : : :
GND* : B14 : : :
GND* : B15 : : :
GND* : B16 : : :
GND+ : B17 : : :
GND : B18 :
GND+ : B19 : : :
GND* : B20 : : :
GND* : B21 : : :
GND* : B22 : : :
GND* : B23 : : :
GND* : B24 : : :
GND* : B25 : : :
GND* : B26 : : :
GND* : B27 : : :
GND* : B28 : : :
GND* : B29 : : :
GND* : B30 : : :
GND* : B31 : : :
GND* : B32 : : :
GND* : B33 : : :
GND : B34 :
GND : B35 :
GND* : C1 : : :
GND : C2 :
GND : C3 :
VCC_IO : C4 : 3.3V
GND* : C5 : : :
GND* : C6 : : :
GND* : C7 : : :
GND* : C8 : : :
GND* : C9 : : :
GND* : C10 : : :
GND* : C11 : : :
GND* : C12 : : :
GND* : C13 : : :
GND* : C14 : : :
GND* : C15 : : :
GND* : C16 : : :
TDO : C17 : : :
GND : C18 :
nCEO : C19 : : :
GND* : C20 : : :
GND* : C21 : : :
GND* : C22 : : :
GND* : C23 : : :
GND* : C24 : : :
GND* : C25 : : :
GND* : C26 : : :
GND* : C27 : : :
GND* : C28 : : :
GND* : C29 : : :
GND* : C30 : : :
GND* : C31 : : :
VCC_IO : C32 : 3.3V
GND : C33 :
GND : C34 :
GND : C35 :
GND* : D1 : : :
GND : D2 :
GND : D3 :
GND : D4 :
VCC_IO : D5 : 3.3V
GND* : D6 : : :
GND* : D7 : : :
GND* : D8 : : :
GND* : D9 : : :
GND* : D10 : : :
GND* : D11 : : :
VCC_INT : D12 :
GND* : D13 : : :
GND* : D14 : : :
GND* : D15 : : :
GND* : D16 : : :
GND : D17 :
GND : D18 :
TRST : D19 : : :
GND* : D20 : : :
GND* : D21 : : :
GND* : D22 : : :
GND* : D23 : : :
VCC_INT : D24 :
GND* : D25 : : :
GND* : D26 : : :
GND* : D27 : : :
GND* : D28 : : :
GND* : D29 : : :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -