scandiv.fit

这是用VHDL语言编写的一个DDS频率合成器的源程序

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 05/10/2004 20:12:41      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "scandiv"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "clk_out"                      : OUTPUT_PIN = 64     ;
    "|LPM_ADD_SUB:190|addcore:adder|:107" : LOCATION   = LC1_B19;
    "|LPM_ADD_SUB:190|addcore:adder|:115" : LOCATION   = LC3_B17;
    "|LPM_ADD_SUB:190|addcore:adder|:123" : LOCATION   = LC4_B17;
    "|LPM_ADD_SUB:190|addcore:adder|:131" : LOCATION   = LC5_B20;
    "|LPM_ADD_SUB:190|addcore:adder|:139" : LOCATION   = LC4_B20;
    "|LPM_ADD_SUB:190|addcore:adder|:147" : LOCATION   = LC4_B22;
    "|LPM_ADD_SUB:190|addcore:adder|:151" : LOCATION   = LC7_B22;
    ":2"                           : LOCATION   = LC7_B17;
    ":4"                           : LOCATION   = LC8_B22;  -- num15
    ":5"                           : LOCATION   = LC6_B22;  -- num14
    ":6"                           : LOCATION   = LC5_B22;  -- num13
    ":7"                           : LOCATION   = LC3_B22;  -- num12
    ":8"                           : LOCATION   = LC2_B22;  -- num11
    ":9"                           : LOCATION   = LC8_B20;  -- num10
    ":10"                          : LOCATION   = LC7_B20;  -- num9
    ":11"                          : LOCATION   = LC6_B20;  -- num8
    ":12"                          : LOCATION   = LC1_B20;  -- num7
    ":13"                          : LOCATION   = LC8_B17;  -- num6
    ":14"                          : LOCATION   = LC6_B17;  -- num5
    ":15"                          : LOCATION   = LC5_B17;  -- num4
    ":16"                          : LOCATION   = LC2_B17;  -- num3
    ":17"                          : LOCATION   = LC5_B19;  -- num2
    ":18"                          : LOCATION   = LC4_B19;  -- num1
    ":19"                          : LOCATION   = LC3_B19;  -- num0
    ":85"                          : LOCATION   = LC2_B19;
    "~85~1"                        : LOCATION   = LC1_B22;
    "~85~2"                        : LOCATION   = LC3_B20;
    "~85~3"                        : LOCATION   = LC1_B17;
    "~85~4"                        : LOCATION   = LC2_B20;

END;

INTERNAL_INFO "scandiv"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC7_B17,->LC8_B22,->LC6_B22,->LC5_B22,->LC3_B22,->LC2_B22,->LC8_B20,->LC7_B20,->LC6_B20,->LC1_B20,->LC8_B17,->LC6_B17,->LC5_B17,->LC2_B17,->LC5_B19,->LC4_B19,->LC3_B19|";
    LC1_B19 : LORAX = "1:MSW0R1C18,HHR22R1,PA10R1C16->LC3_B17,->LC5_B17,->LC2_B17|";
    LC4_B17 : LORAX = "1:MSW3R1C16,HHR7R1,PA15R1C19->LC5_B20,->LC6_B20,->LC1_B20|";
    LC4_B20 : LORAX = "1:MSW3R1C19,HHR13R1,PA2R1C21->LC4_B22,->LC3_B22,->LC2_B22|";
    LC7_B17 : LORAX = "1:MSW6R1C17,G49R1->OH6R1P64|";
    LC2_B22 : LORAX = "1:MSW2R1C20,HHR1R1,PA0R1C19->LC3_B20|";
    LC1_B20 : LORAX = "1:MSW0R1C19,HHR23R1,PA1R1C16->LC1_B17|";
    LC2_B17 : LORAX = "1:MSW1R1C16,HHR5R1,PA6R1C19->LC2_B20|";
    LC1_B22 : LORAX = "1:MSW0R1C21,HHR19R1,PA17R1C19->LC2_B20|";
    LC1_B17 : LORAX = "1:MSW0R1C16,HHR18R1,PA11R1C19->LC2_B20|";
    LC2_B20 : LORAX = "1:MSW1R1C19,HHR11R1,PA21R1C18->LC2_B19|";
    LC2_B19 : LORAX = "1:MSW1R1C18,HHR8R1|2:PA14R1C16->LC7_B17,->LC8_B17,->LC6_B17,->LC5_B17,->LC2_B17|,2:PA14R1C19->LC8_B20,->LC7_B20,->LC6_B20,->LC1_B20|,2:PA9R1C21->LC8_B22,->LC6_B22,->LC5_B22,->LC3_B22,->LC2_B22||";
	LC1_B19 : LORAX2 = "X, LC5_B19, LC4_B19, LC3_B19";
	LC3_B17 : LORAX2 = "X, LC5_B17, LC2_B17, LC1_B19";
	LC4_B17 : LORAX2 = "X, LC8_B17, LC6_B17, LC3_B17";
	LC5_B20 : LORAX2 = "X, LC6_B20, LC1_B20, LC4_B17";
	LC4_B20 : LORAX2 = "X, LC8_B20, LC7_B20, LC5_B20";
	LC4_B22 : LORAX2 = "X, LC3_B22, LC2_B22, LC4_B20";
	LC7_B22 : LORAX2 = "X, X, LC5_B22, LC4_B22";
	LC7_B17 : LORAX2 = "X, X, LC7_B17, LC2_B19";
	LC8_B22 : LORAX2 = "LC8_B22, LC2_B19, LC6_B22, LC7_B22";
	LC6_B22 : LORAX2 = "LC2_B19, LC6_B22, LC5_B22, LC4_B22";
	LC5_B22 : LORAX2 = "X, LC2_B19, LC5_B22, LC4_B22";
	LC3_B22 : LORAX2 = "LC2_B19, LC3_B22, LC2_B22, LC4_B20";
	LC2_B22 : LORAX2 = "X, LC2_B19, LC2_B22, LC4_B20";
	LC8_B20 : LORAX2 = "LC2_B19, LC8_B20, LC7_B20, LC5_B20";
	LC7_B20 : LORAX2 = "X, LC2_B19, LC7_B20, LC5_B20";
	LC6_B20 : LORAX2 = "LC2_B19, LC6_B20, LC1_B20, LC4_B17";
	LC1_B20 : LORAX2 = "X, LC2_B19, LC1_B20, LC4_B17";
	LC8_B17 : LORAX2 = "LC2_B19, LC8_B17, LC6_B17, LC3_B17";
	LC6_B17 : LORAX2 = "X, LC2_B19, LC6_B17, LC3_B17";
	LC5_B17 : LORAX2 = "LC2_B19, LC5_B17, LC2_B17, LC1_B19";
	LC2_B17 : LORAX2 = "X, LC2_B19, LC2_B17, LC1_B19";
	LC5_B19 : LORAX2 = "LC2_B19, LC5_B19, LC4_B19, LC3_B19";
	LC4_B19 : LORAX2 = "X, LC2_B19, LC4_B19, LC3_B19";
	LC3_B19 : LORAX2 = "X, X, LC2_B19, LC3_B19";
	LC1_B22 : LORAX2 = "LC8_B22, LC6_B22, LC3_B22, LC5_B22";
	LC3_B20 : LORAX2 = "LC2_B22, LC8_B20, LC7_B20, LC6_B20";
	LC1_B17 : LORAX2 = "LC1_B20, LC8_B17, LC6_B17, LC5_B17";
	LC2_B20 : LORAX2 = "LC1_B17, LC1_B22, LC3_B20, LC2_B17";
	LC2_B19 : LORAX2 = "LC2_B20, LC5_B19, LC4_B19, LC3_B19";
END;