📄 dds.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 05/05/2004 09:55:16
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "dds"
BEGIN
DEVICE = "EPF10K10LC84-4";
"clk" : INPUT_PIN = 19 ;
"key0" : INPUT_PIN = 67 ;
"key1" : INPUT_PIN = 66 ;
"key2" : INPUT_PIN = 65 ;
"key3" : INPUT_PIN = 64 ;
"co0" : OUTPUT_PIN = 73 ;
"co1" : OUTPUT_PIN = 78 ;
"co2" : OUTPUT_PIN = 79 ;
"co3" : OUTPUT_PIN = 80 ;
"co4" : OUTPUT_PIN = 81 ;
"co5" : OUTPUT_PIN = 83 ;
"co6" : OUTPUT_PIN = 3 ;
"co7" : OUTPUT_PIN = 5 ;
"cs1" : OUTPUT_PIN = 18 ;
"cs2" : OUTPUT_PIN = 70 ;
"cs3" : OUTPUT_PIN = 25 ;
"cs4" : OUTPUT_PIN = 69 ;
"data0" : OUTPUT_PIN = 58 ;
"data1" : OUTPUT_PIN = 54 ;
"data2" : OUTPUT_PIN = 53 ;
"data3" : OUTPUT_PIN = 52 ;
"data4" : OUTPUT_PIN = 51 ;
"data5" : OUTPUT_PIN = 50 ;
"data6" : OUTPUT_PIN = 49 ;
"data7" : OUTPUT_PIN = 48 ;
"int" : OUTPUT_PIN = 17 ;
"kin0" : OUTPUT_PIN = 16 ;
"kin1" : OUTPUT_PIN = 7 ;
"kin2" : OUTPUT_PIN = 8 ;
"kin3" : OUTPUT_PIN = 36 ;
"ko0" : OUTPUT_PIN = 37 ;
"ko1" : OUTPUT_PIN = 24 ;
"ko2" : OUTPUT_PIN = 23 ;
"ko3" : OUTPUT_PIN = 22 ;
"kv" : OUTPUT_PIN = 35 ;
"so0" : OUTPUT_PIN = 9 ;
"so1" : OUTPUT_PIN = 21 ;
"so2" : OUTPUT_PIN = 6 ;
"so3" : OUTPUT_PIN = 27 ;
"|ANTISHAKE:36|:10" : LOCATION = LC7_B7 ; -- |ANTISHAKE:36|s13
"|ANTISHAKE:36|:11" : LOCATION = LC6_B4 ; -- |ANTISHAKE:36|s12
"|ANTISHAKE:36|:12" : LOCATION = LC3_B4 ; -- |ANTISHAKE:36|s11
"|ANTISHAKE:36|:13" : LOCATION = LC3_A1 ; -- |ANTISHAKE:36|s10
"|ANTISHAKE:36|:14" : LOCATION = LC5_B7 ; -- |ANTISHAKE:36|s23
"|ANTISHAKE:36|:15" : LOCATION = LC8_B4 ; -- |ANTISHAKE:36|s22
"|ANTISHAKE:36|:16" : LOCATION = LC4_B4 ; -- |ANTISHAKE:36|s21
"|ANTISHAKE:36|:17" : LOCATION = LC4_A1 ; -- |ANTISHAKE:36|s20
"|ANTISHAKE:36|:120" : LOCATION = LC1_B7 ;
"|ANTISHAKE:36|~120~1" : LOCATION = LC8_B7 ;
"|ANTISHAKE:36|:121" : LOCATION = LC5_B4 ;
"|ANTISHAKE:36|~121~1" : LOCATION = LC2_B4 ;
"|ANTISHAKE:36|:122" : LOCATION = LC1_B4 ;
"|ANTISHAKE:36|~122~1" : LOCATION = LC7_B4 ;
"|ANTISHAKE:36|:123" : LOCATION = LC6_A1 ;
"|ANTISHAKE:36|~123~1" : LOCATION = LC1_A1 ;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|pcarry4" : LOCATION = LC7_B11;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|pcarry5" : LOCATION = LC8_B11;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|pcarry6" : LOCATION = LC2_B19;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|pcarry7" : LOCATION = LC4_B19;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|pcarry8" : LOCATION = LC1_B19;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|pcarry9" : LOCATION = LC2_B24;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|pcarry10" : LOCATION = LC5_B24;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|pcarry11" : LOCATION = LC6_B24;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|pcarry12" : LOCATION = LC7_B24;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|:122" : LOCATION = LC4_B16;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|:172" : LOCATION = LC3_B11;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|~173~1" : LOCATION = LC5_B11;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|:175" : LOCATION = LC5_B19;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|:176" : LOCATION = LC6_B19;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|:177" : LOCATION = LC1_B16;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|:178" : LOCATION = LC4_B24;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|:179" : LOCATION = LC1_B24;
"|CONTROL1:1|LPM_ADD_SUB:466|addcore:adder|:180" : LOCATION = LC8_B24;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|pcarry2" : LOCATION = LC1_B8 ;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|pcarry3" : LOCATION = LC8_B8 ;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|:111" : LOCATION = LC4_B2 ;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|:115" : LOCATION = LC5_B2 ;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|:119" : LOCATION = LC3_B19;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|:123" : LOCATION = LC2_B15;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|:127" : LOCATION = LC1_B15;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|:131" : LOCATION = LC1_B14;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|:135" : LOCATION = LC8_B14;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|:151" : LOCATION = LC1_B2 ;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|:152" : LOCATION = LC7_B2 ;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|:159" : LOCATION = LC2_B12;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|~159~1" : LOCATION = LC3_B24;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|:161" : LOCATION = LC4_B11;
"|CONTROL1:1|LPM_ADD_SUB:485|addcore:adder|:162" : LOCATION = LC2_B8 ;
"|CONTROL1:1|:7" : LOCATION = LC1_A5 ;
"|CONTROL1:1|:9" : LOCATION = LC4_A12;
"|CONTROL1:1|:11" : LOCATION = LC1_B13;
"|CONTROL1:1|:13" : LOCATION = LC1_B22;
"|CONTROL1:1|:15" : LOCATION = LC6_B23;
"|CONTROL1:1|:17" : LOCATION = LC7_B23;
"|CONTROL1:1|:19" : LOCATION = LC8_B23;
"|CONTROL1:1|:21" : LOCATION = LC1_A12;
"|CONTROL1:1|:23" : LOCATION = LC1_A9 ;
"|CONTROL1:1|:25" : LOCATION = LC5_A16;
"|CONTROL1:1|:27" : LOCATION = LC5_A9 ;
"|CONTROL1:1|:29" : LOCATION = LC2_A4 ;
"|CONTROL1:1|:31" : LOCATION = LC3_A4 ;
"|CONTROL1:1|:33" : LOCATION = LC2_A1 ;
"|CONTROL1:1|:35" : LOCATION = LC1_A3 ;
"|CONTROL1:1|:37" : LOCATION = LC5_A3 ;
"|CONTROL1:1|:39" : LOCATION = LC2_A9 ;
"|CONTROL1:1|:41" : LOCATION = LC7_A6 ;
"|CONTROL1:1|:43" : LOCATION = LC8_A4 ;
"|CONTROL1:1|:45" : LOCATION = LC1_A6 ;
"|CONTROL1:1|:47" : LOCATION = LC6_A20;
"|CONTROL1:1|:49" : LOCATION = LC8_A20;
"|CONTROL1:1|:53" : LOCATION = LC7_A4 ;
"|CONTROL1:1|:55" : LOCATION = LC2_A12;
"|CONTROL1:1|:57" : LOCATION = LC1_B21; -- |CONTROL1:1|state1
"|CONTROL1:1|:58" : LOCATION = LC7_A9 ; -- |CONTROL1:1|state0
"|CONTROL1:1|:59" : LOCATION = LC4_B12; -- |CONTROL1:1|freq13
"|CONTROL1:1|:60" : LOCATION = LC2_B13; -- |CONTROL1:1|freq12
"|CONTROL1:1|:61" : LOCATION = LC6_B14; -- |CONTROL1:1|freq11
"|CONTROL1:1|:62" : LOCATION = LC2_B14; -- |CONTROL1:1|freq10
"|CONTROL1:1|:63" : LOCATION = LC6_B15; -- |CONTROL1:1|freq9
"|CONTROL1:1|:64" : LOCATION = LC4_B15; -- |CONTROL1:1|freq8
"|CONTROL1:1|:65" : LOCATION = LC8_B19; -- |CONTROL1:1|freq7
"|CONTROL1:1|:66" : LOCATION = LC6_B2 ; -- |CONTROL1:1|freq6
"|CONTROL1:1|:67" : LOCATION = LC3_B1 ; -- |CONTROL1:1|freq5
"|CONTROL1:1|:68" : LOCATION = LC6_B11; -- |CONTROL1:1|freq4
"|CONTROL1:1|:69" : LOCATION = LC5_B8 ; -- |CONTROL1:1|freq3
"|CONTROL1:1|:70" : LOCATION = LC1_B3 ; -- |CONTROL1:1|freq2
"|CONTROL1:1|:71" : LOCATION = LC1_B1 ; -- |CONTROL1:1|freq1
"|CONTROL1:1|:72" : LOCATION = LC2_B1 ; -- |CONTROL1:1|freq0
"|CONTROL1:1|:228" : LOCATION = LC5_B5 ;
"|CONTROL1:1|:244" : LOCATION = LC1_B12;
"|CONTROL1:1|:577" : LOCATION = LC7_B12;
"|CONTROL1:1|:637" : LOCATION = LC7_B8 ;
"|CONTROL1:1|:643" : LOCATION = LC8_B3 ;
"|CONTROL1:1|:806" : LOCATION = LC3_B5 ;
"|CONTROL1:1|:815" : LOCATION = LC1_B5 ;
"|CONTROL1:1|:824" : LOCATION = LC2_B5 ;
"|CONTROL1:1|:1188" : LOCATION = LC3_B12;
"|CONTROL1:1|:1200" : LOCATION = LC5_B12;
"|CONTROL1:1|:1344" : LOCATION = LC3_B8 ;
"|CONTROL1:1|:1350" : LOCATION = LC4_B8 ;
"|CONTROL1:1|~1362~1" : LOCATION = LC3_B3 ;
"|CONTROL1:1|:1365" : LOCATION = LC6_B3 ;
"|CONTROL1:1|:1625" : LOCATION = LC4_B3 ;
"|CONTROL1:1|:1631" : LOCATION = LC8_B5 ;
"|CONTROL1:1|~1689~1" : LOCATION = LC3_B16;
"|CONTROL1:1|~1689~2" : LOCATION = LC5_B16;
"|CONTROL1:1|~1689~3" : LOCATION = LC6_B16;
"|CONTROL1:1|:1929" : LOCATION = LC2_B16;
"|CONTROL1:1|:1957" : LOCATION = LC8_A9 ;
"|CONTROL1:1|:1965" : LOCATION = LC3_A9 ;
"|CONTROL1:1|~1965~1" : LOCATION = LC7_A12;
"|CONTROL1:1|~1965~2" : LOCATION = LC1_B23;
"|CONTROL1:1|~1965~3" : LOCATION = LC8_B22;
"|CONTROL1:1|~1965~4" : LOCATION = LC2_B3 ;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -