本文首次设计并验证了基于macom三合一芯片设计的光模块电路,该电路旨在提供一种满足SFF-8472中规定的数字诊断功能的低成本SFP+模块。电路采用激光器驱动、限幅放大器、控制器以及时钟恢复单元集成的单芯片,在保证高精度数字诊断功能基础上,实现了低成本高可靠的特点。该电路在光接收接口组件与激光器驱动和限幅放大器单元的限幅放大器部分之间接入滤波器来提高模块的灵敏度及信号质量。在控制器单元的数字电位器的引脚上采用外加电阻的方式避免出现上电不发光的故障问题。该研究结果为下一代SFP-DD光模块设计与开发工作,奠定了一定的理论与实践基础。This paper designs and validates the optical module circuit based on the MACOM Trinity chip for the first time.This circuit aims to provide a low-cost SFP module which meets the digital diagnosis function specified in SFF-8472.The circuit uses a single chip integrated with laser driver,limiting amplifier,controller and clock recovery unit.On the basis of ensuring high precision digital diagnosis function,it achieves the characteristics of low cost and high reliability.The circuit connects a filter between the optical receiving interface module and the limiting amplifier part of the laser driver and limiting amplifier unit to improve the sensitivity and signal quality of the module.The pin of the digital potentiometer in the controller unit is equipped with an external resistance to avoid the problem of power failure.The research results lay a theoretical and practical foundation for optical module design in high-speed data center.
上传时间： 2022-04-03
上传用户：
针对交流电路过零检测电路存在结构复杂、过零点检测不准确、编程繁琐等问题，设计了一种基于LM339的硬件结构简单的过零检测电路。通过仿真软件Mulisim对该设计电路进行了仿真，实验证明了该方案过零检测的可行性、稳定性和可靠性，可直接作为交流电路中CPU的过零信号。Aiming at the problems of AC cilsuit zero crossing detection circuit such as complex structure, zero crossing detection and cumbersome programming, a zero crossing detection circuit with simple hardware structure based on LM339 was designed. The design circuit was simulated by simulation software Mulisim, and the feasibility, stability and reliability of zero crossing detection were proved by experiments, which can be used as zero crossing signal of CPU in AC circuit directly.
上传时间： 2022-05-03
上传用户：
本文提出基于AD2S1210的旋变信号转换电路,给出了具体的电路实现方法和配置方法.相比以往的RDC方案,本系统具有精度高,设计灵活,可靠性高等特点,可广泛应用于各种伺服系统中.In this paper, the switching signal conversion circuit based on ADS1210 is proposed, and the specific circuit implementation and configuration method are given. Compared with the previous RDC scheme, this system has the characteristics of high precision, flexible design and high reliability, and can be widely used in various servo systems.
标签： ad2s1210
上传时间： 2022-05-04
上传用户：
1. 目的 规范产品的PCB焊盘设计工艺， 规定PCB焊盘设计工艺的相关参数，使得PCB 的设计满足可生产性、可测试性、安规、EMC、EMI 等的技术规范要求,在产品设计过程中构建产品的工艺、技术、质量、成本优势。 2. 适用范围本规范适用于空调类电子产品的PCB 工艺设计，运用于但不限于PCB 的设计、PCB 批产工艺审查、单板工艺审查等活动。本规范之前的相关标准、规范的内容如与本规范的规定相抵触的，以本规范为准3.引用/参考标准或资料TS-S0902010001 <〈信息技术设备PCB 安规设计规范〉>TS—SOE0199001 <〈电子设备的强迫风冷热设计规范〉〉TS—SOE0199002 〈<电子设备的自然冷却热设计规范>>IEC60194 〈<印制板设计、制造与组装术语与定义>> （Printed Circuit Board designmanufacture and assembly-terms and definitions)IPC—A-600F 〈<印制板的验收条件>〉 （Acceptably of printed board)IEC609504。规范内容4。1焊盘的定义 通孔焊盘的外层形状通常为圆形、方形或椭圆形。具体尺寸定义详述如下，名词定义如图所示。1) 孔径尺寸:若实物管脚为圆形：孔径尺寸(直径)=实际管脚直径+0。20∽0。30mm（8。0∽12。0MIL）左右；若实物管脚为方形或矩形：孔径尺寸（直径）=实际管脚对角线的尺寸+0.10∽0。20mm（4.0∽8。0MIL）左右。2) 焊盘尺寸： 常规焊盘尺寸=孔径尺寸（直径)+0.50mm（20.0 MIL)左右.…………
标签： PCB
上传时间： 2022-05-24
上传用户：canderile
The CD4020BC, CD4060BC are 14-stage ripple carrybinary counters, and the CD4040BC is a 12-sta
上传时间： 2013-05-15
上传用户：ajaxmoon
实现实时语音的录入以及与RS232串口完美结合-Real-time voice input and the perfect combination with the RS232 serial port
上传时间： 2013-05-16
上传用户：大三三
labview 与access的通信工具代码 labview 与access的通信工具代码-LabVIEW and the access code of the communication too
标签： LabSQL
上传时间： 2013-06-11
上传用户：327000306
SUN公司最新最全的中文API帮助文档！不可不看-SUN latest and the most comprehensive Chinese API help files! Can not see!
上传时间： 2013-04-24
上传用户：lhc9102
·详细说明：h.264 source codes , the x264 is the most effience t e. and the codes are the newst codes . you c a n compile ti using VC 文件列表: x264 ....\AUTHORS ....\build ....\
上传时间： 2013-07-31
上传用户：zhang97080564
·详细说明：机器人视觉处理程序，用摄像头记录图像，用于控制机器人分离目标物和障碍物- The robot vision disposal procedure, with 鎽勫儚澶?the record picture, uses in to control the robot separation sighting vane and the obstacle文件列表: 机器人视觉处理
上传时间： 2013-05-20
上传用户：ryanxue
