phase_reg.fit

这是用VHDL语言编写的一个DDS频率合成器的源程序

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 04/26/2004 16:52:59      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "phase_reg"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "Datain0"                      : INPUT_PIN  = 42     ;
    "Datain1"                      : INPUT_PIN  = 44     ;
    "Datain2"                      : INPUT_PIN  = 84     ;
    "Datain3"                      : INPUT_PIN  = 43     ;
    "Datain4"                      : INPUT_PIN  = 80     ;
    "Datain5"                      : INPUT_PIN  = 28     ;
    "Datain6"                      : INPUT_PIN  = 35     ;
    "Datain7"                      : INPUT_PIN  = 30     ;
    "Datain8"                      : INPUT_PIN  = 8      ;
    "Datain9"                      : INPUT_PIN  = 24     ;
    "Datain10"                     : INPUT_PIN  = 27     ;
    "Datain11"                     : INPUT_PIN  = 21     ;
    "Datain12"                     : INPUT_PIN  = 29     ;
    "Datain13"                     : INPUT_PIN  = 66     ;
    "Datain14"                     : INPUT_PIN  = 67     ;
    "reset"                        : INPUT_PIN  = 2      ;
    "Dataout0"                     : OUTPUT_PIN = 62     ;
    "Dataout1"                     : OUTPUT_PIN = 3      ;
    "Dataout2"                     : OUTPUT_PIN = 22     ;
    "Dataout3"                     : OUTPUT_PIN = 53     ;
    "Dataout4"                     : OUTPUT_PIN = 61     ;
    "Dataout5"                     : OUTPUT_PIN = 59     ;
    "Dataout6"                     : OUTPUT_PIN = 17     ;
    "Dataout7"                     : OUTPUT_PIN = 60     ;
    "Dataout8"                     : OUTPUT_PIN = 23     ;
    "Dataout9"                     : OUTPUT_PIN = 65     ;
    "Dataout10"                    : OUTPUT_PIN = 58     ;
    "Dataout11"                    : OUTPUT_PIN = 25     ;
    "Dataout12"                    : OUTPUT_PIN = 52     ;
    "Dataout13"                    : OUTPUT_PIN = 39     ;
    "Dataout14"                    : OUTPUT_PIN = 64     ;
    ":33"                          : LOCATION   = LC7_B11;  -- buff14
    ":34"                          : LOCATION   = LC1_B11;  -- buff13
    ":35"                          : LOCATION   = LC2_C19;  -- buff12
    ":36"                          : LOCATION   = LC8_B11;  -- buff11
    ":37"                          : LOCATION   = LC7_C19;  -- buff10
    ":38"                          : LOCATION   = LC5_B11;  -- buff9
    ":39"                          : LOCATION   = LC4_B11;  -- buff8
    ":40"                          : LOCATION   = LC4_C19;  -- buff7
    ":41"                          : LOCATION   = LC3_B11;  -- buff6
    ":42"                          : LOCATION   = LC5_C19;  -- buff5
    ":43"                          : LOCATION   = LC3_C19;  -- buff4
    ":44"                          : LOCATION   = LC6_C19;  -- buff3
    ":45"                          : LOCATION   = LC2_B11;  -- buff2
    ":46"                          : LOCATION   = LC6_B11;  -- buff1
    ":47"                          : LOCATION   = LC1_C19;  -- buff0

END;

INTERNAL_INFO "phase_reg"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC7_B11,->LC1_B11,->LC2_C19,->LC8_B11,->LC7_C19,->LC5_B11,->LC4_B11,->LC4_C19,->LC3_B11,->LC5_C19,->LC3_C19,->LC6_C19,->LC2_B11,->LC6_B11,->LC1_C19|";
    OD3P42  : LORAX = "1:FB3|2:FH3R2,PA5R2C18->LC1_C19||";
    OD2P44  : LORAX = "1:FB2|2:FH2R1,PA6R1C10->LC6_B11||";
    OD0P84  : LORAX = "1:FB0|2:FH0R1,PA0R1C10->LC2_B11||";
    OD5P43  : LORAX = "1:FB5|2:CH1R2,PA7R2C18->LC6_C19||";
    OV0C22P80 : LORAX = "1:V1C22,HHR18R2,PA11R2C18->LC3_C19|";
    OH10R2P28 : LORAX = "1:G41R2,PA18R2C18->LC5_C19|";
    OV2C5P35 : LORAX = "1:V14C5,HHL30R1,PA5R1C10->LC3_B11|";
    OH14R2P30 : LORAX = "1:G44R2,PA6R2C18->LC4_C19|";
    OV1C2P8 : LORAX = "1:V8C2,HHL1R1,PA2R1C10->LC4_B11|";
    OH13R1P24 : LORAX = "1:G91R1,PA7R1C10->LC5_B11|";
    OH8R2P27 : LORAX = "1:G13R2,PA0R2C18->LC7_C19|";
    OH8R1P21 : LORAX = "1:G95R1,PA3R1C10->LC8_B11|";
    OH12R2P29 : LORAX = "1:G40R2,PA19R2C18->LC2_C19|";
    OH2R1P66 : LORAX = "1:G46R1,PA4R1C10->LC1_B11|";
    OH0R1P67 : LORAX = "1:G10R1,PA11R1C10->LC7_B11|";
    OD1P2   : LORAX = "1:FB1|2:FH1R1,PA20R1C10->LC7_B11,->LC1_B11,->LC8_B11,->LC5_B11,->LC4_B11,->LC3_B11,->LC2_B11,->LC6_B11|,2:FH1R2,PA20R2C18->LC2_C19,->LC7_C19,->LC4_C19,->LC5_C19,->LC3_C19,->LC6_C19,->LC1_C19||";
    LC7_B11 : LORAX = "1:MSW6R1C10,G82R1->OH6R1P64|";
    LC1_B11 : LORAX = "1:MSW0R1C10,V2C10->OV3C10P39|";
    LC2_C19 : LORAX = "1:MSW1R2C18,V4C18->OV2C18P52|";
    LC8_B11 : LORAX = "1:MSW7R1C11,HHL47R1->OH15R1P25|";
    LC7_C19 : LORAX = "1:MSW6R2C18,HHR29R2->OH6R2P58|";
    LC5_B11 : LORAX = "1:MSW4R1C11,G66R1->OH4R1P65|";
    LC4_B11 : LORAX = "1:MSW3R1C10,HHL7R1->OH11R1P23|";
    LC4_C19 : LORAX = "1:MSW3R2C19,HHR13R2->OH3R2P60|";
    LC3_B11 : LORAX = "1:MSW2R1C10,V8C10,HHL0R0->OH10R0P17|";
    LC5_C19 : LORAX = "1:MSW4R2C19,HHR36R2->OH4R2P59|";
    LC3_C19 : LORAX = "1:MSW2R2C18,G12R2->OH2R2P61|";
    LC6_C19 : LORAX = "1:MSW5R2C19,V16C19->OV2C19P53|";
    LC2_B11 : LORAX = "1:MSW1R1C11,HHL16R1->OH9R1P22|";
    LC6_B11 : LORAX = "1:MSW5R1C11,V17C11->OV0C11P3|";
    LC1_C19 : LORAX = "1:MSW0R2C18,HHR22R2->OH0R2P62|";
	LC7_B11 : LORAX2 = "X, X, OH0R1P67, OD1P2";
	LC1_B11 : LORAX2 = "X, X, OH2R1P66, OD1P2";
	LC2_C19 : LORAX2 = "X, X, OH12R2P29, OD1P2";
	LC8_B11 : LORAX2 = "X, X, OH8R1P21, OD1P2";
	LC7_C19 : LORAX2 = "X, X, OH8R2P27, OD1P2";
	LC5_B11 : LORAX2 = "X, X, OH13R1P24, OD1P2";
	LC4_B11 : LORAX2 = "X, X, OV1C2P8, OD1P2";
	LC4_C19 : LORAX2 = "X, X, OH14R2P30, OD1P2";
	LC3_B11 : LORAX2 = "X, X, OV2C5P35, OD1P2";
	LC5_C19 : LORAX2 = "X, X, OH10R2P28, OD1P2";
	LC3_C19 : LORAX2 = "X, X, OV0C22P80, OD1P2";
	LC6_C19 : LORAX2 = "X, X, OD5P43, OD1P2";
	LC2_B11 : LORAX2 = "X, X, OD0P84, OD1P2";
	LC6_B11 : LORAX2 = "X, X, OD2P44, OD1P2";
	LC1_C19 : LORAX2 = "X, X, OD3P42, OD1P2";
END;