📄 dds1.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 05/12/2004 19:05:12
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "dds1"
BEGIN
DEVICE = "EPF10K10LC84-4";
"clk" : INPUT_PIN = 19 ;
"key0" : INPUT_PIN = 62 ;
"key1" : INPUT_PIN = 61 ;
"key2" : INPUT_PIN = 60 ;
"key3" : INPUT_PIN = 59 ;
"co0" : OUTPUT_PIN = 73 ;
"co1" : OUTPUT_PIN = 78 ;
"co2" : OUTPUT_PIN = 79 ;
"co3" : OUTPUT_PIN = 80 ;
"co4" : OUTPUT_PIN = 81 ;
"co5" : OUTPUT_PIN = 83 ;
"co6" : OUTPUT_PIN = 3 ;
"co7" : OUTPUT_PIN = 5 ;
"cs1" : OUTPUT_PIN = 18 ;
"cs2" : OUTPUT_PIN = 70 ;
"cs3" : OUTPUT_PIN = 25 ;
"cs4" : OUTPUT_PIN = 69 ;
"data0" : OUTPUT_PIN = 58 ;
"data1" : OUTPUT_PIN = 54 ;
"data2" : OUTPUT_PIN = 53 ;
"data3" : OUTPUT_PIN = 52 ;
"data4" : OUTPUT_PIN = 51 ;
"data5" : OUTPUT_PIN = 50 ;
"data6" : OUTPUT_PIN = 49 ;
"data7" : OUTPUT_PIN = 48 ;
"int" : OUTPUT_PIN = 17 ;
"ko0" : OUTPUT_PIN = 67 ;
"ko1" : OUTPUT_PIN = 66 ;
"ko2" : OUTPUT_PIN = 65 ;
"ko3" : OUTPUT_PIN = 64 ;
"kv" : OUTPUT_PIN = 47 ;
"|ANTISHAKE1:50|:4" : LOCATION = LC7_B14; -- |ANTISHAKE1:50|s1
"|ANTISHAKE1:50|:5" : LOCATION = LC2_B14; -- |ANTISHAKE1:50|s2
"|ANTISHAKE1:50|:36" : LOCATION = LC5_B14;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|pcarry4" : LOCATION = LC1_A1 ;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|pcarry5" : LOCATION = LC2_A4 ;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|pcarry6" : LOCATION = LC5_A4 ;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|pcarry7" : LOCATION = LC1_A4 ;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|pcarry8" : LOCATION = LC4_A22;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|pcarry9" : LOCATION = LC8_A22;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|pcarry10" : LOCATION = LC3_A21;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|pcarry11" : LOCATION = LC4_A21;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|pcarry12" : LOCATION = LC3_A13;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|pcarry13" : LOCATION = LC7_A13;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|pcarry14" : LOCATION = LC2_A18;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|:190" : LOCATION = LC3_A9 ;
"|CONTROL1:63|LPM_ADD_SUB:604|addcore:adder|~191~1" : LOCATION = LC7_A9 ;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|pcarry2" : LOCATION = LC1_A14;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|pcarry3" : LOCATION = LC4_A9 ;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:119" : LOCATION = LC2_A9 ;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:123" : LOCATION = LC6_A4 ;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:127" : LOCATION = LC8_A4 ;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:131" : LOCATION = LC5_A22;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:135" : LOCATION = LC1_A22;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:139" : LOCATION = LC6_A21;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:143" : LOCATION = LC1_A21;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:147" : LOCATION = LC5_A13;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:151" : LOCATION = LC8_A13;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:155" : LOCATION = LC3_A18;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:166" : LOCATION = LC6_A9 ;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:167" : LOCATION = LC8_A9 ;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:168" : LOCATION = LC4_A4 ;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:169" : LOCATION = LC3_A4 ;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:170" : LOCATION = LC7_A22;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:171" : LOCATION = LC6_A22;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:172" : LOCATION = LC8_A21;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:173" : LOCATION = LC7_A21;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:174" : LOCATION = LC6_A13;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:175" : LOCATION = LC4_A13;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:176" : LOCATION = LC7_A15;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:177" : LOCATION = LC4_A18;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:179" : LOCATION = LC4_A17;
"|CONTROL1:63|LPM_ADD_SUB:625|addcore:adder|:180" : LOCATION = LC4_A20;
"|CONTROL1:63|:7" : LOCATION = LC4_C5 ;
"|CONTROL1:63|:9" : LOCATION = LC1_C12;
"|CONTROL1:63|:11" : LOCATION = LC2_C13;
"|CONTROL1:63|:13" : LOCATION = LC4_C21;
"|CONTROL1:63|:15" : LOCATION = LC8_A23;
"|CONTROL1:63|:17" : LOCATION = LC2_A24;
"|CONTROL1:63|:19" : LOCATION = LC4_C24;
"|CONTROL1:63|:21" : LOCATION = LC1_A19;
"|CONTROL1:63|:23" : LOCATION = LC6_A23;
"|CONTROL1:63|:25" : LOCATION = LC8_A7 ;
"|CONTROL1:63|:27" : LOCATION = LC8_A1 ;
"|CONTROL1:63|:29" : LOCATION = LC1_A7 ;
"|CONTROL1:63|:31" : LOCATION = LC6_A5 ;
"|CONTROL1:63|:33" : LOCATION = LC4_A5 ;
"|CONTROL1:63|:35" : LOCATION = LC5_A5 ;
"|CONTROL1:63|:37" : LOCATION = LC8_A5 ;
"|CONTROL1:63|:39" : LOCATION = LC1_A23;
"|CONTROL1:63|:41" : LOCATION = LC7_A1 ;
"|CONTROL1:63|:43" : LOCATION = LC3_A5 ;
"|CONTROL1:63|:45" : LOCATION = LC4_A1 ;
"|CONTROL1:63|:47" : LOCATION = LC6_A1 ;
"|CONTROL1:63|:49" : LOCATION = LC5_A15;
"|CONTROL1:63|:51" : LOCATION = LC2_A1 ;
"|CONTROL1:63|:53" : LOCATION = LC3_A1 ;
"|CONTROL1:63|:57" : LOCATION = LC1_A5 ;
"|CONTROL1:63|:59" : LOCATION = LC2_C24;
"|CONTROL1:63|:61" : LOCATION = LC5_A19; -- |CONTROL1:63|state1
"|CONTROL1:63|:62" : LOCATION = LC2_A5 ; -- |CONTROL1:63|state0
"|CONTROL1:63|:63" : LOCATION = LC1_A18; -- |CONTROL1:63|freq15
"|CONTROL1:63|:64" : LOCATION = LC2_A15; -- |CONTROL1:63|freq14
"|CONTROL1:63|:65" : LOCATION = LC8_A15; -- |CONTROL1:63|freq13
"|CONTROL1:63|:66" : LOCATION = LC2_A13; -- |CONTROL1:63|freq12
"|CONTROL1:63|:67" : LOCATION = LC1_A15; -- |CONTROL1:63|freq11
"|CONTROL1:63|:68" : LOCATION = LC2_A21; -- |CONTROL1:63|freq10
"|CONTROL1:63|:69" : LOCATION = LC1_A13; -- |CONTROL1:63|freq9
"|CONTROL1:63|:70" : LOCATION = LC2_A22; -- |CONTROL1:63|freq8
"|CONTROL1:63|:71" : LOCATION = LC5_A21; -- |CONTROL1:63|freq7
"|CONTROL1:63|:72" : LOCATION = LC7_A4 ; -- |CONTROL1:63|freq6
"|CONTROL1:63|:73" : LOCATION = LC1_A9 ; -- |CONTROL1:63|freq5
"|CONTROL1:63|:74" : LOCATION = LC5_A9 ; -- |CONTROL1:63|freq4
"|CONTROL1:63|:75" : LOCATION = LC2_A20; -- |CONTROL1:63|freq3
"|CONTROL1:63|:76" : LOCATION = LC1_A17; -- |CONTROL1:63|freq2
"|CONTROL1:63|:77" : LOCATION = LC2_A17; -- |CONTROL1:63|freq1
"|CONTROL1:63|:78" : LOCATION = LC3_A16; -- |CONTROL1:63|freq0
"|CONTROL1:63|:325" : LOCATION = LC5_B22;
"|CONTROL1:63|:341" : LOCATION = LC2_A23;
"|CONTROL1:63|:352" : LOCATION = LC1_A24;
"|CONTROL1:63|:816" : LOCATION = LC8_A18;
"|CONTROL1:63|:924" : LOCATION = LC8_A20;
"|CONTROL1:63|:933" : LOCATION = LC8_A17;
"|CONTROL1:63|:996" : LOCATION = LC3_A23;
"|CONTROL1:63|:1005" : LOCATION = LC8_A24;
"|CONTROL1:63|:1032" : LOCATION = LC6_A24;
"|CONTROL1:63|:1131" : LOCATION = LC1_B22;
"|CONTROL1:63|:1140" : LOCATION = LC3_B22;
"|CONTROL1:63|:1149" : LOCATION = LC2_A19;
"|CONTROL1:63|:1924" : LOCATION = LC3_A24;
"|CONTROL1:63|:1987" : LOCATION = LC5_A18;
"|CONTROL1:63|:1995" : LOCATION = LC6_A18;
"|CONTROL1:63|:2164" : LOCATION = LC5_A20;
"|CONTROL1:63|:2175" : LOCATION = LC6_A20;
"|CONTROL1:63|:2179" : LOCATION = LC5_A17;
"|CONTROL1:63|:2185" : LOCATION = LC6_A17;
"|CONTROL1:63|~2210~1" : LOCATION = LC4_A16;
"|CONTROL1:63|~2220~1" : LOCATION = LC3_A20;
"|CONTROL1:63|:2239" : LOCATION = LC3_A19;
"|CONTROL1:63|:2329" : LOCATION = LC4_A23;
"|CONTROL1:63|:2336" : LOCATION = LC4_A24;
"|CONTROL1:63|~2336~1" : LOCATION = LC1_A20;
"|CONTROL1:63|:2359" : LOCATION = LC7_A18;
"|CONTROL1:63|:2431" : LOCATION = LC7_A20;
"|CONTROL1:63|:2437" : LOCATION = LC7_A17;
"|CONTROL1:63|:2461" : LOCATION = LC4_A19;
"|CONTROL1:63|~2532~1" : LOCATION = LC3_A15;
"|CONTROL1:63|~2532~2" : LOCATION = LC3_A22;
"|CONTROL1:63|~2532~3" : LOCATION = LC5_A1 ;
"|CONTROL1:63|~2532~4" : LOCATION = LC4_A15;
"|CONTROL1:63|:2734" : LOCATION = LC6_A15;
"|CONTROL1:63|:2810" : LOCATION = LC5_A24;
"|CONTROL1:63|~2810~1" : LOCATION = LC5_A16;
"|CONTROL1:63|~2818~1" : LOCATION = LC7_A19;
"|CONTROL1:63|:2994" : LOCATION = LC7_A5 ;
"|CONTROL1:63|~3127~1" : LOCATION = LC3_A17;
"|CONTROL1:63|~3127~2" : LOCATION = LC1_A16;
"|CONTROL1:63|~3127~3" : LOCATION = LC2_A16;
"|CONTROL1:63|~3136~1" : LOCATION = LC6_A16;
"|CONTROL1:63|~3136~2" : LOCATION = LC7_A16;
"|CONTROL1:63|~3136~3" : LOCATION = LC8_A16;
"|CONTROL1:63|~3172~1" : LOCATION = LC1_C24;
"|CONTROL1:63|:3183" : LOCATION = LC5_A23;
"|CONTROL1:63|:3187" : LOCATION = LC7_A24;
"|CONTROL1:63|~3199~1" : LOCATION = LC5_C24;
"|CONTROL1:63|~3199~2" : LOCATION = LC6_C24;
"|CONTROL1:63|~3199~3" : LOCATION = LC7_C24;
"|CONTROL1:63|~3199~4" : LOCATION = LC8_C24;
"|CONTROL1:63|~3208~1" : LOCATION = LC6_A19;
"|CONTROL1:63|~3208~2" : LOCATION = LC3_C24;
"|CONTROL1:63|~3208~3" : LOCATION = LC8_A19;
"cs4~1" : LOCATION = LC8_C22;
"|DELAY:52|LPM_ADD_SUB:83|addcore:adder|:55" : LOCATION = LC1_C7 ;
"|DELAY:52|:3" : LOCATION = LC8_C4 ;
"|DELAY:52|:5" : LOCATION = LC6_C4 ; -- |DELAY:52|s13
"|DELAY:52|:6" : LOCATION = LC7_C4 ; -- |DELAY:52|s12
"|DELAY:52|:7" : LOCATION = LC5_C4 ; -- |DELAY:52|s11
"|DELAY:52|:8" : LOCATION = LC1_C4 ; -- |DELAY:52|s10
"|DELAY:52|~45~1" : LOCATION = LC3_C4 ;
"|DELAY:52|:68" : LOCATION = LC2_C4 ;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -