📄 control1.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 04/26/2004 18:59:39
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "control1"
BEGIN
DEVICE = "EPF10K10LC84-4";
"clk" : INPUT_PIN = 1 ;
"keydata0" : INPUT_PIN = 84 ;
"keydata1" : INPUT_PIN = 42 ;
"keydata2" : INPUT_PIN = 44 ;
"keydata3" : INPUT_PIN = 43 ;
"keyvalid" : INPUT_PIN = 2 ;
"C51OUT0" : OUTPUT_PIN = 52 ;
"C51OUT1" : OUTPUT_PIN = 72 ;
"C51OUT2" : OUTPUT_PIN = 53 ;
"C51OUT3" : OUTPUT_PIN = 60 ;
"C51OUT4" : OUTPUT_PIN = 28 ;
"C51OUT5" : OUTPUT_PIN = 65 ;
"C51OUT6" : OUTPUT_PIN = 24 ;
"C51OUT7" : OUTPUT_PIN = 6 ;
"Interrupt" : OUTPUT_PIN = 47 ;
"MEN" : OUTPUT_PIN = 79 ;
"M0" : OUTPUT_PIN = 23 ;
"M1" : OUTPUT_PIN = 64 ;
"M2" : OUTPUT_PIN = 67 ;
"M3" : OUTPUT_PIN = 25 ;
"M4" : OUTPUT_PIN = 7 ;
"M5" : OUTPUT_PIN = 22 ;
"M6" : OUTPUT_PIN = 9 ;
"M7" : OUTPUT_PIN = 59 ;
"M8" : OUTPUT_PIN = 10 ;
"M9" : OUTPUT_PIN = 66 ;
"M10" : OUTPUT_PIN = 39 ;
"M11" : OUTPUT_PIN = 21 ;
"M12" : OUTPUT_PIN = 8 ;
"M13" : OUTPUT_PIN = 78 ;
"PRreset" : OUTPUT_PIN = 81 ;
"|LPM_ADD_SUB:406|addcore:adder|pcarry4" : LOCATION = LC7_B19;
"|LPM_ADD_SUB:406|addcore:adder|pcarry5" : LOCATION = LC6_B19;
"|LPM_ADD_SUB:406|addcore:adder|pcarry6" : LOCATION = LC1_B6 ;
"|LPM_ADD_SUB:406|addcore:adder|pcarry7" : LOCATION = LC3_B6 ;
"|LPM_ADD_SUB:406|addcore:adder|pcarry8" : LOCATION = LC1_B5 ;
"|LPM_ADD_SUB:406|addcore:adder|pcarry9" : LOCATION = LC8_B5 ;
"|LPM_ADD_SUB:406|addcore:adder|pcarry10" : LOCATION = LC4_B8 ;
"|LPM_ADD_SUB:406|addcore:adder|pcarry11" : LOCATION = LC3_B8 ;
"|LPM_ADD_SUB:406|addcore:adder|pcarry12" : LOCATION = LC6_B8 ;
"|LPM_ADD_SUB:406|addcore:adder|:172" : LOCATION = LC3_B19;
"|LPM_ADD_SUB:406|addcore:adder|:173" : LOCATION = LC8_B19;
"|LPM_ADD_SUB:406|addcore:adder|:174" : LOCATION = LC4_B22;
"|LPM_ADD_SUB:406|addcore:adder|:175" : LOCATION = LC2_B6 ;
"|LPM_ADD_SUB:406|addcore:adder|:176" : LOCATION = LC4_B1 ;
"|LPM_ADD_SUB:406|addcore:adder|:177" : LOCATION = LC2_B5 ;
"|LPM_ADD_SUB:406|addcore:adder|:178" : LOCATION = LC1_B8 ;
"|LPM_ADD_SUB:406|addcore:adder|:179" : LOCATION = LC5_B8 ;
"|LPM_ADD_SUB:406|addcore:adder|:180" : LOCATION = LC3_B24;
"|LPM_ADD_SUB:425|addcore:adder|pcarry2" : LOCATION = LC4_B16;
"|LPM_ADD_SUB:425|addcore:adder|pcarry3" : LOCATION = LC1_B13;
"|LPM_ADD_SUB:425|addcore:adder|:111" : LOCATION = LC2_B19;
"|LPM_ADD_SUB:425|addcore:adder|:115" : LOCATION = LC4_B6 ;
"|LPM_ADD_SUB:425|addcore:adder|:119" : LOCATION = LC6_B6 ;
"|LPM_ADD_SUB:425|addcore:adder|:123" : LOCATION = LC3_B5 ;
"|LPM_ADD_SUB:425|addcore:adder|:127" : LOCATION = LC4_B5 ;
"|LPM_ADD_SUB:425|addcore:adder|:131" : LOCATION = LC7_B8 ;
"|LPM_ADD_SUB:425|addcore:adder|:159" : LOCATION = LC2_B17;
"|LPM_ADD_SUB:425|addcore:adder|~159~1" : LOCATION = LC8_B8 ;
"|LPM_ADD_SUB:425|addcore:adder|:161" : LOCATION = LC4_B13;
"|LPM_ADD_SUB:425|addcore:adder|:162" : LOCATION = LC3_B13;
":7" : LOCATION = LC7_B3 ;
":9" : LOCATION = LC6_B3 ;
":11" : LOCATION = LC5_B3 ;
":13" : LOCATION = LC3_B3 ;
":15" : LOCATION = LC4_B20;
":17" : LOCATION = LC3_B20;
":19" : LOCATION = LC2_B20;
":21" : LOCATION = LC6_B20;
":23" : LOCATION = LC5_B24;
":25" : LOCATION = LC2_B3 ;
":27" : LOCATION = LC1_B17;
":29" : LOCATION = LC4_B11;
":31" : LOCATION = LC2_B24;
":33" : LOCATION = LC3_B1 ;
":35" : LOCATION = LC8_B24;
":37" : LOCATION = LC6_B1 ;
":39" : LOCATION = LC2_B22;
":41" : LOCATION = LC1_B3 ;
":43" : LOCATION = LC8_B3 ;
":45" : LOCATION = LC1_B15;
":47" : LOCATION = LC6_B22;
":49" : LOCATION = LC4_B3 ;
":51" : LOCATION = LC6_B23;
":53" : LOCATION = LC8_B22;
":55" : LOCATION = LC8_B14;
":57" : LOCATION = LC1_B18; -- state1
":58" : LOCATION = LC3_B22; -- state0
":59" : LOCATION = LC8_B17; -- freq13
":60" : LOCATION = LC6_B11; -- freq12
":61" : LOCATION = LC7_B24; -- freq11
":62" : LOCATION = LC2_B1 ; -- freq10
":63" : LOCATION = LC6_B5 ; -- freq9
":64" : LOCATION = LC1_B1 ; -- freq8
":65" : LOCATION = LC5_B6 ; -- freq7
":66" : LOCATION = LC2_B11; -- freq6
":67" : LOCATION = LC1_B11; -- freq5
":68" : LOCATION = LC5_B19; -- freq4
":69" : LOCATION = LC4_B18; -- freq3
":70" : LOCATION = LC2_B13; -- freq2
":71" : LOCATION = LC1_B16; -- freq1
":72" : LOCATION = LC8_B16; -- freq0
":180" : LOCATION = LC7_B20;
":196" : LOCATION = LC6_B18;
"~196~1" : LOCATION = LC2_B18;
"~196~2" : LOCATION = LC4_B23;
":493" : LOCATION = LC7_B17;
":553" : LOCATION = LC8_B18;
":559" : LOCATION = LC8_B13;
":658" : LOCATION = LC1_B20;
":667" : LOCATION = LC5_B20;
":676" : LOCATION = LC8_B20;
":1040" : LOCATION = LC3_B17;
":1052" : LOCATION = LC4_B17;
":1196" : LOCATION = LC3_B18;
":1202" : LOCATION = LC5_B18;
"~1214~1" : LOCATION = LC5_B13;
":1217" : LOCATION = LC6_B13;
"~1249~1" : LOCATION = LC7_B21;
":1477" : LOCATION = LC1_B21;
":1483" : LOCATION = LC7_B22;
":1630" : LOCATION = LC1_B22;
":1638" : LOCATION = LC1_B24;
"~1764~1" : LOCATION = LC2_B16;
"~1830~1" : LOCATION = LC5_B21;
"~1848~1" : LOCATION = LC3_B21;
":1881" : LOCATION = LC6_B17;
"~1893~1" : LOCATION = LC5_B17;
"~1893~2" : LOCATION = LC8_B11;
"~1902~1" : LOCATION = LC4_B24;
"~1902~2" : LOCATION = LC6_B24;
"~1911~1" : LOCATION = LC2_B8 ;
"~1911~2" : LOCATION = LC8_B1 ;
"~1920~1" : LOCATION = LC5_B5 ;
"~1920~2" : LOCATION = LC7_B5 ;
"~1929~1" : LOCATION = LC5_B1 ;
"~1929~2" : LOCATION = LC7_B1 ;
"~1938~1" : LOCATION = LC7_B6 ;
"~1938~2" : LOCATION = LC8_B6 ;
"~1947~1" : LOCATION = LC5_B22;
"~1947~2" : LOCATION = LC7_B11;
"~1956~1" : LOCATION = LC5_B11;
"~1956~2" : LOCATION = LC1_B19;
"~1965~1" : LOCATION = LC6_B21;
"~1965~2" : LOCATION = LC4_B19;
"~1965~3" : LOCATION = LC3_B16;
"~1965~4" : LOCATION = LC3_B11;
":1971" : LOCATION = LC7_B18;
":1980" : LOCATION = LC7_B13;
"~1992~1" : LOCATION = LC5_B16;
"~2001~1" : LOCATION = LC2_B21;
"~2001~2" : LOCATION = LC4_B21;
"~2001~3" : LOCATION = LC6_B16;
END;
INTERNAL_INFO "control1"
BEGIN
DEVICE = EPF10K10LC84-4;
OD4P1 : LORAX = "1:FB4->LC7_B3,->LC6_B3,->LC5_B3,->LC3_B3,->LC4_B20,->LC3_B20,->LC2_B20,->LC6_B20,->LC5_B24,->LC2_B3,->LC1_B17,->LC4_B11,->LC2_B24,->LC3_B1,->LC8_B24,->LC6_B1,->LC2_B22,->LC1_B3,->LC8_B3,->LC1_B15,->LC6_B22,->LC4_B3,->LC6_B23,->LC8_B22,->LC8_B14,->LC1_B18,->LC3_B22,->LC8_B17,->LC6_B11,->LC7_B24,->LC2_B1,->LC6_B5,->LC1_B1,->LC5_B6,->LC2_B11,->LC1_B11,->LC5_B19,->LC4_B18,->LC2_B13,->LC1_B16,->LC8_B16|";
OD0P84 : LORAX = "1:FB0|2:FH0R1|3:PA0R1C15->LC8_B16|,3:PA0R1C19->LC6_B20,->LC1_B20,->LC5_B20,->LC8_B20|||";
OD3P42 : LORAX = "1:FB3|2:FH3R1|3:PA5R1C12->LC4_B13|,3:PA5R1C15->LC4_B16,->LC5_B16|,3:PA5R1C19->LC2_B20,->LC7_B20,->LC1_B20,->LC5_B20,->LC8_B20|||";
OD2P44 : LORAX = "1:FB2|2:FH2R1|3:PA6R1C12->LC4_B13|,3:PA6R1C15->LC4_B16|,3:PA6R1C19->LC3_B20,->LC7_B20,->LC1_B20,->LC5_B20,->LC8_B20|||";
OD5P43 : LORAX = "1:FB5|2:CH1R1|3:PA7R1C12->LC1_B13,->LC3_B13|,3:PA7R1C19->LC4_B20,->LC7_B20,->LC1_B20,->LC5_B20,->LC8_B20|||";
OD1P2 : LORAX = "1:FB1|2:FH1R1|3:PA20R1C12->LC7_B13|,3:PA20R1C15->LC2_B16,->LC3_B16|,3:PA13R1C16->LC6_B17|,3:PA20R1C17->LC1_B18,->LC6_B18,->LC7_B18|,3:PA20R1C21->LC7_B22|||";
LC6_B19 : LORAX = "1:MSW5R1C18,G64R1|2:PA9R1C5->LC1_B6,->LC4_B6|,2:PA9R1C21->LC4_B22||";
LC3_B6 : LORAX = "1:MSW2R1C5|2:G6R1,PA6R1C0->LC4_B1|,2:HHL15R1,PA0R1C4->LC1_B5,->LC3_B5||";
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -