ddr_cntl_a_lfsr32_0.v

来自「arm控制FPGA的DDR测试代码」· Verilog 代码 · 共 84 行

//////////////////////////////////////////////////////////////////////////////
// Copyright (c) 2005 Xilinx, Inc.
// This design is confidential and proprietary of Xilinx, All Rights Reserved.
///////////////////////////////////////////////////////////////////////////////
//   ____  ____
//  /   /\/   /
// /___/  \  / Vendor: Xilinx
// \   \   \/ Version: 1.6
//  \   \    Application : MIG
//  /   /    Filename: ddr_cntl_a_lfsr32_0.v
// /___/   /\ Date Last Modified:  Tue Jul 11 2006
// \   \  /  \ Date Created: Mon May 2 2005
//  \___\/\___\
// Device: Spartan-3/3e
// Design Name: DDR1_S3/S3e
// Description: This module generates the user input data for hardware test 
///////////////////////////////////////////////////////////////////////////////

`timescale 1ns/100ps

`include "../rtl/ddr_cntl_a_parameters_0.v"

module    ddr_cntl_a_lfsr32_0( 
		clk,
		rst,
		lfsr_rst,
		lfsr_ena,
		lfsr_data_m,
		lfsr_out
                );
               
   input          clk;
   input          rst;
   input          lfsr_rst;
   input          lfsr_ena;   

   output [((`data_mask_width*2)-1):0]	lfsr_data_m;
   output [((`data_width*2)-1):0] lfsr_out;
   
   reg  [7:0]    lfsr_r;
   reg  [7:0]    lfsr_f;
   
assign lfsr_data_m = 16'b0;


           
assign lfsr_out = {
	lfsr_r,
	lfsr_r,
	lfsr_r,
	lfsr_r ,
                   
	lfsr_f,
	lfsr_f,
	lfsr_f,
	lfsr_f
		   };                          

always @ (posedge clk)
begin
	if (rst == 1'b1)
	begin
		lfsr_r <= 'b0;
		lfsr_f <= 'd1;
	end
	else if (lfsr_rst == 1'b1)
		begin
		lfsr_r <= 'b0;
		lfsr_f <= 'd1;
		end
	else if (lfsr_ena == 1'b1)
	begin
		lfsr_r <= lfsr_r + 2;	
		lfsr_f <= lfsr_f + 2;	
	end
	else
	begin
		lfsr_f <= lfsr_f ;
		lfsr_r <= lfsr_r;
	end
	end

endmodule