clkscan2_old.fit

此设计采用Verilog HDL硬件语言设计,在掌宇开发板上实现. 将整个电路分为两个子模块

-- MAX+plus II Compiler Fit File      
-- Version 10.1 06/12/2001            
-- Compiled: 05/28/2003 15:13:40      

-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "clkscan2_old"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "reset"                        : INPUT_PIN  = 42     ;
    "start"                        : INPUT_PIN  = 2      ;
    "scan_data0"                   : OUTPUT_PIN = 18     ;
    "scan_data1"                   : OUTPUT_PIN = 72     ;
    "scan_data2"                   : OUTPUT_PIN = 16     ;
    "scan_data3"                   : OUTPUT_PIN = 69     ;
    "scan_en0"                     : OUTPUT_PIN = 70     ;
    "scan_en1"                     : OUTPUT_PIN = 73     ;
    "scan_en2"                     : OUTPUT_PIN = 9      ;
    "scan_en3"                     : OUTPUT_PIN = 17     ;
    "scan_en4"                     : OUTPUT_PIN = 71     ;
    "scan_en5"                     : OUTPUT_PIN = 19     ;
    "|lpm_add_sub:193|addcore:adder|:51" : LOCATION   = LC8_A1 ;
    "start~1"                      : LOCATION   = LC1_A8 ;
    ":15"                          : LOCATION   = LC7_A11;  -- run
    ":18"                          : LOCATION   = LC6_A11;
    ":20"                          : LOCATION   = LC7_A10;  -- count3
    ":21"                          : LOCATION   = LC5_A10;  -- count2
    ":22"                          : LOCATION   = LC3_A10;  -- count1
    ":23"                          : LOCATION   = LC4_A10;  -- count0
    ":41"                          : LOCATION   = LC1_A10;
    ":58"                          : LOCATION   = LC6_A10;
    ":59"                          : LOCATION   = LC8_A10;
    ":72"                          : LOCATION   = LC8_A11;
    ":73"                          : LOCATION   = LC1_A11;
    ":74"                          : LOCATION   = LC2_A10;
    ":75"                          : LOCATION   = LC5_A11;
    ":77"                          : LOCATION   = LC3_A11;
    "~107~1"                       : LOCATION   = LC2_A11;
    ":117"                         : LOCATION   = LC6_A1 ;  -- state2
    ":118"                         : LOCATION   = LC4_A11;  -- state1
    ":119"                         : LOCATION   = LC8_A8 ;  -- state0
    ":121"                         : LOCATION   = LC2_A8 ;
    ":180"                         : LOCATION   = LC7_A1 ;
    ":181"                         : LOCATION   = LC4_A1 ;
    ":182"                         : LOCATION   = LC3_A1 ;
    ":183"                         : LOCATION   = LC2_A1 ;
    ":184"                         : LOCATION   = LC1_A1 ;
    ":185"                         : LOCATION   = LC5_A1 ;

END;

INTERNAL_INFO "clkscan2_old"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC7_A11,->LC7_A10,->LC5_A10,->LC3_A10,->LC4_A10,->LC8_A11,->LC1_A11,->LC2_A10,->LC5_A11,->LC6_A1,->LC4_A11,->LC8_A8,->LC7_A1,->LC4_A1,->LC3_A1,->LC2_A1,->LC1_A1,->LC5_A1|";
    OD3P42  : LORAX = "1:FB3->LC7_A11,->LC8_A11,->LC1_A11,->LC2_A10,->LC5_A11,->LC7_A1,->LC4_A1,->LC3_A1,->LC2_A1,->LC1_A1,->LC5_A1|2:FH3R0|3:PA5R0C7->LC2_A8|,3:PA5R0C10->LC6_A11,->LC7_A11,->LC8_A11,->LC1_A11,->LC5_A11|||";
    OD1P2   : LORAX = "1:FB1->LC7_A11,->LC7_A10,->LC5_A10,->LC3_A10,->LC4_A10|2:FH1R0|3:PA20R0C7->LC1_A8,->LC2_A8|,3:PA20R0C10->LC7_A11,->LC3_A11|||";
    LC1_A8  : LORAX = "1:MSW0R0C7,HHL23R0,PA1R0C0->LC7_A1,->LC4_A1,->LC3_A1,->LC2_A1,->LC1_A1,->LC5_A1|";
    LC6_A11 : LORAX = "1:MSW5R0C10,HHL42R0,PA17R0C9->LC7_A10,->LC5_A10,->LC3_A10,->LC4_A10|";
    LC4_A10 : LORAX = "1:MSW0R0C8,HHL21R0,PA15R0C10->LC5_A11|";
    LC1_A10 : LORAX = "1:MSW0R0C9,HHL19R0,PA12R0C10->LC5_A11|";
    LC6_A10 : LORAX = "1:MSW5R0C9,HHL33R0,PA16R0C10->LC8_A11|";
    LC8_A10 : LORAX = "1:MSW7R0C9,HHL27R0,PA8R0C10->LC1_A11|";
    LC8_A11 : LORAX = "1:MSW7R0C10,G80R0->OH7R0P69|";
    LC1_A11 : LORAX = "1:MSW0R0C10,HHL18R0->OH8R0P16|";
    LC2_A10 : LORAX = "1:MSW2R0C8,G7R0->OH2R0P72|";
    LC5_A11 : LORAX = "1:MSW4R0C10,HHL44R0->OH12R0P18|";
    LC3_A11 : LORAX = "1:MSW2R0C10,HHL0R0,PA1R0C9->LC2_A10|";
    LC2_A11 : LORAX = "1:MSW1R0C11,HHL16R0|2:PA20R0C0->LC6_A1|,2:PA9R0C7->LC8_A8||";
    LC6_A1  : LORAX = "1:MSW5R0C0,HHL34R0,PA1R0C10->LC2_A11|";
    LC4_A11 : LORAX = "1:MSW3R0C11,HHL10R0,PA12R0C0->LC8_A1,->LC7_A1,->LC4_A1,->LC3_A1,->LC2_A1,->LC1_A1,->LC5_A1|";
    LC8_A8  : LORAX = "1:MSW7R0C7,HHL35R0|2:PA18R0C0->LC8_A1,->LC7_A1,->LC4_A1,->LC3_A1,->LC2_A1,->LC1_A1,->LC5_A1|,2:PA0R0C10->LC2_A11,->LC4_A11||";
    LC2_A8  : LORAX = "1:MSW1R0C7,HHL11R0|2:PA4R0C0->LC6_A1|,2:PA4R0C10->LC4_A11||";
    LC7_A1  : LORAX = "1:MSW6R0C1,HHL32R0->OH14R0P19|";
    LC4_A1  : LORAX = "1:MSW3R0C1,G9R0->OH3R0P71|";
    LC3_A1  : LORAX = "1:MSW2R0C0,HHL3R0->OH10R0P17|";
    LC2_A1  : LORAX = "1:MSW1R0C1,V4C1->OV1C1P9|";
    LC1_A1  : LORAX = "1:MSW0R0C0,G39R0->OH0R0P73|";
    LC5_A1  : LORAX = "1:MSW4R0C0,G50R0->OH4R0P70|";
	LC8_A1  : LORAX2 = "X, X, LC4_A11, LC8_A8";
	LC1_A8  : LORAX2 = "X, X, X, OD1P2";
	LC7_A11 : LORAX2 = "OD1P2, X, X, X";
	LC6_A11 : LORAX2 = "X, X, OD3P42, LC7_A11";
	LC7_A10 : LORAX2 = "LC6_A11, X, X, LC6_A10";
	LC5_A10 : LORAX2 = "LC6_A11, X, X, LC8_A10";
	LC3_A10 : LORAX2 = "LC6_A11, LC3_A10, LC1_A10, LC4_A10";
	LC4_A10 : LORAX2 = "LC6_A11, X, LC1_A10, LC4_A10";
	LC1_A10 : LORAX2 = "LC7_A10, LC3_A10, LC5_A10, LC4_A10";
	LC6_A10 : LORAX2 = "LC7_A10, LC3_A10, LC5_A10, LC4_A10";
	LC8_A10 : LORAX2 = "LC5_A10, LC3_A10, LC1_A10, LC4_A10";
	LC8_A11 : LORAX2 = "LC3_A11, X, X, LC6_A10";
	LC1_A11 : LORAX2 = "LC3_A11, X, X, LC8_A10";
	LC2_A10 : LORAX2 = "LC3_A11, LC3_A10, LC1_A10, LC4_A10";
	LC5_A11 : LORAX2 = "LC3_A11, X, LC1_A10, LC4_A10";
	LC3_A11 : LORAX2 = "X, X, OD1P2, LC7_A11";
	LC2_A11 : LORAX2 = "LC4_A11, LC8_A8, LC6_A1, LC6_A11";
	LC6_A1  : LORAX2 = "LC2_A8, LC8_A1, LC6_A1, LC2_A11";
	LC4_A11 : LORAX2 = "LC2_A8, LC4_A11, LC8_A8, LC2_A11";
	LC8_A8  : LORAX2 = "LC2_A8, X, LC8_A8, LC2_A11";
	LC2_A8  : LORAX2 = "X, X, OD1P2, OD3P42";
	LC7_A1  : LORAX2 = "LC1_A8, LC4_A11, LC8_A8, LC6_A1";
	LC4_A1  : LORAX2 = "LC1_A8, LC4_A11, LC8_A8, LC6_A1";
	LC3_A1  : LORAX2 = "LC1_A8, LC4_A11, LC8_A8, LC6_A1";
	LC2_A1  : LORAX2 = "LC1_A8, LC4_A11, LC8_A8, LC6_A1";
	LC1_A1  : LORAX2 = "LC1_A8, LC4_A11, LC8_A8, LC6_A1";
	LC5_A1  : LORAX2 = "LC1_A8, LC4_A11, LC8_A8, LC6_A1";
END;