clkscan2.fit

此设计采用Verilog HDL硬件语言设计,在掌宇开发板上实现. 将整个电路分为两个子模块

-- MAX+plus II Compiler Fit File      
-- Version 10.1 06/12/2001            
-- Compiled: 05/21/2004 17:07:57      

-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "clkscan2"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 43     ;
    "reset"                        : INPUT_PIN  = 2      ;
    "start"                        : INPUT_PIN  = 1      ;
    "scan_data0"                   : OUTPUT_PIN = 59     ;
    "scan_data1"                   : OUTPUT_PIN = 58     ;
    "scan_data2"                   : OUTPUT_PIN = 62     ;
    "scan_data3"                   : OUTPUT_PIN = 60     ;
    "scan_en1"                     : OUTPUT_PIN = 28     ;
    "scan_en2"                     : OUTPUT_PIN = 30     ;
    "scan_en3"                     : OUTPUT_PIN = 61     ;
    "scan_en4"                     : OUTPUT_PIN = 29     ;
    "scan_en5"                     : OUTPUT_PIN = 36     ;
    "scan_en6"                     : OUTPUT_PIN = 27     ;
    "|lpm_add_sub:168|addcore:adder|:55" : LOCATION   = LC4_C18;
    "|lpm_add_sub:168|addcore:adder|:59" : LOCATION   = LC5_C18;
    "|lpm_add_sub:169|addcore:adder|:60" : LOCATION   = LC7_C6 ;
    "reset~1"                      : LOCATION   = LC4_C8 ;
    ":24"                          : LOCATION   = LC2_C18;
    ":52"                          : LOCATION   = LC1_C8 ;  -- enable
    ":54"                          : LOCATION   = LC3_C18;
    ":55"                          : LOCATION   = LC1_C18;
    ":56"                          : LOCATION   = LC7_C18;
    ":57"                          : LOCATION   = LC8_C18;
    ":72"                          : LOCATION   = LC2_C6 ;  -- state2
    ":73"                          : LOCATION   = LC5_C6 ;  -- state1
    ":74"                          : LOCATION   = LC6_C8 ;  -- state0
    ":78"                          : LOCATION   = LC3_C8 ;
    ":96"                          : LOCATION   = LC4_C6 ;
    ":101"                         : LOCATION   = LC8_C6 ;
    ":156"                         : LOCATION   = LC1_C6 ;
    ":157"                         : LOCATION   = LC7_C8 ;
    ":158"                         : LOCATION   = LC5_C8 ;
    ":159"                         : LOCATION   = LC2_C8 ;
    ":160"                         : LOCATION   = LC6_C6 ;
    ":161"                         : LOCATION   = LC3_C6 ;

END;

INTERNAL_INFO "clkscan2"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD5P43  : LORAX = "1:FB5->LC3_C18,->LC1_C18,->LC7_C18,->LC8_C18,->LC2_C6,->LC5_C6,->LC6_C8,->LC1_C6,->LC7_C8,->LC5_C8,->LC2_C8,->LC6_C6,->LC3_C6|";
    OD1P2   : LORAX = "1:FB1->LC1_C8,->LC3_C18,->LC1_C18,->LC7_C18,->LC8_C18,->LC1_C6,->LC7_C8,->LC5_C8,->LC2_C8,->LC6_C6,->LC3_C6|2:FH1R2,PA20R2C7->LC4_C8,->LC1_C8,->LC7_C8,->LC5_C8,->LC2_C8||";
    LC4_C8  : LORAX = "1:MSW3R2C7,HHL13R2,PA2R2C5->LC2_C6,->LC5_C6|";
    OD4P1   : LORAX = "1:FB4->LC1_C8|";
    LC1_C8  : LORAX = "1:MSW0R2C7,G38R2|2:PA0R2C17->LC3_C18,->LC1_C18,->LC7_C18,->LC8_C18|,2:PA0R2C5->LC2_C6,->LC5_C6,->LC1_C6,->LC6_C6,->LC3_C6||";
    LC3_C18 : LORAX = "1:MSW3R2C16,G26R2->OH3R2P60|";
    LC1_C18 : LORAX = "1:MSW0R2C17,HHR20R2->OH0R2P62|";
    LC7_C18 : LORAX = "1:MSW6R2C17,G49R2->OH6R2P58|";
    LC8_C18 : LORAX = "1:MSW4R2C16,G62R2->OH4R2P59|";
    LC2_C6  : LORAX = "1:MSW2R2C4,HHL0R2,PA1R2C7->LC3_C8,->LC7_C8,->LC5_C8,->LC2_C8|";
    LC5_C6  : LORAX = "1:MSW4R2C5,HHL30R2,PA13R2C7->LC3_C8,->LC7_C8,->LC5_C8,->LC2_C8|";
    LC6_C8  : LORAX = "1:MSW5R2C7,HHL28R2,PA7R2C5->LC7_C6,->LC4_C6,->LC8_C6,->LC1_C6,->LC6_C6|";
    LC3_C8  : LORAX = "1:MSW2R2C7,HHL4R2,PA18R2C5->LC2_C6,->LC4_C6,->LC8_C6|";
    LC1_C6  : LORAX = "1:MSW0R2C5,HHL20R2->OH8R2P27|";
    LC7_C8  : LORAX = "1:MSW7R2C6,V22C6->OV2C6P36|";
    LC5_C8  : LORAX = "1:MSW4R2C7,HHL36R2->OH12R2P29|";
    LC2_C8  : LORAX = "1:MSW2R2C6,G12R2->OH2R2P61|";
    LC6_C6  : LORAX = "1:MSW6R2C4,G76R2->OH14R2P30|";
    LC3_C6  : LORAX = "1:MSW2R2C5,HHL15R2->OH10R2P28|";
	LC4_C18 : LORAX2 = "X, X, LC7_C18, LC8_C18";
	LC5_C18 : LORAX2 = "X, LC1_C18, LC7_C18, LC8_C18";
	LC7_C6  : LORAX2 = "X, LC6_C8, LC2_C6, LC5_C6";
	LC4_C8  : LORAX2 = "X, X, X, OD1P2";
	LC2_C18 : LORAX2 = "LC3_C18, LC7_C18, LC1_C18, LC8_C18";
	LC3_C18 : LORAX2 = "LC1_C8, LC3_C18, LC2_C18, LC5_C18";
	LC1_C18 : LORAX2 = "LC1_C8, LC1_C18, LC2_C18, LC4_C18";
	LC7_C18 : LORAX2 = "LC1_C8, LC7_C18, LC2_C18, LC8_C18";
	LC8_C18 : LORAX2 = "LC1_C8, X, LC2_C18, LC8_C18";
	LC2_C6  : LORAX2 = "LC4_C8, LC1_C8, LC7_C6, LC3_C8";
	LC5_C6  : LORAX2 = "LC4_C8, X, LC1_C8, LC4_C6";
	LC6_C8  : LORAX2 = "LC4_C8, LC1_C8, LC6_C8, LC3_C8";
	LC3_C8  : LORAX2 = "X, X, LC5_C6, LC2_C6";
	LC4_C6  : LORAX2 = "X, LC6_C8, LC5_C6, LC3_C8";
	LC8_C6  : LORAX2 = "LC7_C6, LC6_C8, LC3_C8, LC4_C6";
	LC1_C6  : LORAX2 = "LC1_C8, LC7_C6, LC6_C8, LC4_C6";
	LC7_C8  : LORAX2 = "LC1_C8, LC6_C8, LC2_C6, LC5_C6";
	LC5_C8  : LORAX2 = "LC1_C8, LC6_C8, LC2_C6, LC5_C6";
	LC2_C8  : LORAX2 = "LC1_C8, LC6_C8, LC2_C6, LC5_C6";
	LC6_C6  : LORAX2 = "LC1_C8, LC7_C6, LC6_C8, LC4_C6";
	LC3_C6  : LORAX2 = "LC1_C8, X, X, LC8_C6";
END;