clkscan1.fit

此设计采用Verilog HDL硬件语言设计,在掌宇开发板上实现. 将整个电路分为两个子模块

-- MAX+plus II Compiler Fit File      
-- Version 10.1 06/12/2001            
-- Compiled: 05/28/2003 15:32:19      

-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "clkscan1"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 43     ;
    "reset"                        : INPUT_PIN  = 2      ;
    "start"                        : INPUT_PIN  = 1      ;
    "scan_data0"                   : OUTPUT_PIN = 22     ;
    "scan_data1"                   : OUTPUT_PIN = 21     ;
    "scan_data2"                   : OUTPUT_PIN = 24     ;
    "scan_data3"                   : OUTPUT_PIN = 23     ;
    "scan_en0"                     : OUTPUT_PIN = 28     ;
    "scan_en1"                     : OUTPUT_PIN = 72     ;
    "scan_en2"                     : OUTPUT_PIN = 59     ;
    "scan_en3"                     : OUTPUT_PIN = 25     ;
    "scan_en4"                     : OUTPUT_PIN = 18     ;
    "scan_en5"                     : OUTPUT_PIN = 58     ;
    "|lpm_add_sub:73|addcore:adder|:55" : LOCATION   = LC7_B11;
    "|lpm_add_sub:73|addcore:adder|:59" : LOCATION   = LC8_B11;
    ":23"                          : LOCATION   = LC5_B11;
    ":51"                          : LOCATION   = LC3_B11;  -- enable
    ":53"                          : LOCATION   = LC4_B11;
    ":54"                          : LOCATION   = LC6_B11;
    ":55"                          : LOCATION   = LC1_B11;
    ":56"                          : LOCATION   = LC2_B11;
    ":67"                          : LOCATION   = LC6_C14;
    ":68"                          : LOCATION   = LC8_A8 ;
    ":69"                          : LOCATION   = LC8_B6 ;
    ":70"                          : LOCATION   = LC5_C15;
    ":71"                          : LOCATION   = LC2_A14;
    ":72"                          : LOCATION   = LC3_C3 ;

END;

INTERNAL_INFO "clkscan1"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD5P43  : LORAX = "1:FB5->LC4_B11,->LC6_B11,->LC1_B11,->LC2_B11,->LC6_C14,->LC8_A8,->LC8_B6,->LC5_C15,->LC2_A14,->LC3_C3|";
    OD1P2   : LORAX = "1:FB1->LC3_B11,->LC4_B11,->LC6_B11,->LC1_B11,->LC2_B11|";
    OD4P1   : LORAX = "1:FB4->LC3_B11|";
    LC4_B11 : LORAX = "1:MSW3R1C11,HHL10R1->OH11R1P23|";
    LC6_B11 : LORAX = "1:MSW5R1C10,G73R1->OH13R1P24|";
    LC1_B11 : LORAX = "1:MSW0R1C10,HHL18R1->OH8R1P21|";
    LC2_B11 : LORAX = "1:MSW1R1C11,G20R1->OH9R1P22|";
    LC6_C14 : LORAX = "1:MSW6R2C12,HHR29R2->OH6R2P58|";
    LC8_A8  : LORAX = "1:MSW4R0C6,HHL41R0->OH12R0P18|";
    LC8_B6  : LORAX = "1:MSW7R1C5,HHL47R1->OH15R1P25|";
    LC5_C15 : LORAX = "1:MSW4R2C14,HHR43R2->OH4R2P59|";
    LC2_A14 : LORAX = "1:MSW2R0C12,HHR3R0->OH2R0P72|";
    LC3_C3  : LORAX = "1:MSW2R2C3,HHL14R2->OH10R2P28|";
	LC7_B11 : LORAX2 = "X, X, LC1_B11, LC2_B11";
	LC8_B11 : LORAX2 = "X, LC6_B11, LC1_B11, LC2_B11";
	LC5_B11 : LORAX2 = "LC4_B11, LC1_B11, LC6_B11, LC2_B11";
	LC4_B11 : LORAX2 = "LC3_B11, LC4_B11, LC5_B11, LC8_B11";
	LC6_B11 : LORAX2 = "LC3_B11, LC6_B11, LC5_B11, LC7_B11";
	LC1_B11 : LORAX2 = "LC3_B11, LC1_B11, LC5_B11, LC2_B11";
	LC2_B11 : LORAX2 = "LC3_B11, X, LC5_B11, LC2_B11";
END;