📄 time1.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.1 06/12/2001
-- Compiled: 05/29/2003 22:02:17
-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "time1"
BEGIN
DEVICE = "EPF10K10LC84-3";
"clk" : INPUT_PIN = 1 ;
"reset" : INPUT_PIN = 42 ;
"start" : INPUT_PIN = 2 ;
"reg10" : OUTPUT_PIN = 37 ;
"reg11" : OUTPUT_PIN = 28 ;
"reg12" : OUTPUT_PIN = 81 ;
"reg13" : OUTPUT_PIN = 27 ;
"reg20" : OUTPUT_PIN = 60 ;
"reg21" : OUTPUT_PIN = 73 ;
"reg22" : OUTPUT_PIN = 38 ;
"reg23" : OUTPUT_PIN = 70 ;
"reg30" : OUTPUT_PIN = 69 ;
"reg31" : OUTPUT_PIN = 58 ;
"reg32" : OUTPUT_PIN = 39 ;
"reg33" : OUTPUT_PIN = 59 ;
"reg40" : OUTPUT_PIN = 22 ;
"reg41" : OUTPUT_PIN = 61 ;
"reg42" : OUTPUT_PIN = 78 ;
"reg43" : OUTPUT_PIN = 30 ;
"reg50" : OUTPUT_PIN = 51 ;
"reg51" : OUTPUT_PIN = 80 ;
"reg52" : OUTPUT_PIN = 49 ;
"reg53" : OUTPUT_PIN = 83 ;
"reg60" : OUTPUT_PIN = 54 ;
"reg61" : OUTPUT_PIN = 48 ;
"reg62" : OUTPUT_PIN = 62 ;
"reg63" : OUTPUT_PIN = 29 ;
"|lpm_add_sub:775|addcore:adder|:55" : LOCATION = LC6_C24;
"|lpm_add_sub:775|addcore:adder|:59" : LOCATION = LC3_C14;
"|lpm_add_sub:777|addcore:adder|:55" : LOCATION = LC5_C24;
"|lpm_add_sub:777|addcore:adder|:59" : LOCATION = LC6_C23;
"|lpm_add_sub:778|addcore:adder|:59" : LOCATION = LC3_C20;
"|lpm_add_sub:779|addcore:adder|:55" : LOCATION = LC4_C11;
":29" : LOCATION = LC2_C10; -- started
":42" : LOCATION = LC1_C20;
"~42~1" : LOCATION = LC2_C20;
"~42~2" : LOCATION = LC5_C17;
"~42~3" : LOCATION = LC3_C6 ;
"~42~4" : LOCATION = LC2_C6 ;
"~42~5" : LOCATION = LC6_C5 ;
":51" : LOCATION = LC8_C14;
"~51~1" : LOCATION = LC2_C14;
":69" : LOCATION = LC7_C16;
":111" : LOCATION = LC4_C14;
":112" : LOCATION = LC4_C15;
":113" : LOCATION = LC3_C24;
":202" : LOCATION = LC5_C14;
":203" : LOCATION = LC5_C15;
":204" : LOCATION = LC4_C24;
":214" : LOCATION = LC8_C16;
"~214~1" : LOCATION = LC6_C16;
":215" : LOCATION = LC4_C16;
"~215~1" : LOCATION = LC3_C16;
":216" : LOCATION = LC2_C15;
"~216~1" : LOCATION = LC1_C15;
"~230~1" : LOCATION = LC6_C18;
":235" : LOCATION = LC7_C14; -- sec7
":236" : LOCATION = LC3_C15; -- sec6
":237" : LOCATION = LC1_C24; -- sec5
":238" : LOCATION = LC1_C18; -- sec4
":239" : LOCATION = LC2_C16; -- sec3
":240" : LOCATION = LC5_C16; -- sec2
":241" : LOCATION = LC8_C15; -- sec1
":242" : LOCATION = LC1_C21; -- sec0
":243" : LOCATION = LC4_C23;
":261" : LOCATION = LC6_C20;
":266" : LOCATION = LC2_C17;
":298" : LOCATION = LC7_C23;
":299" : LOCATION = LC8_C24;
":300" : LOCATION = LC2_C23;
":327" : LOCATION = LC4_C20;
":352" : LOCATION = LC5_C20;
"~394~1" : LOCATION = LC6_C17;
"~414~1" : LOCATION = LC3_C18;
"~414~2" : LOCATION = LC5_C18;
"~414~3" : LOCATION = LC8_C18;
":416" : LOCATION = LC3_C23;
":422" : LOCATION = LC8_C23;
"~422~1" : LOCATION = LC1_C13;
"~436~1" : LOCATION = LC5_C22;
"~436~2" : LOCATION = LC7_C22;
"~436~3" : LOCATION = LC8_C22;
"~437~1" : LOCATION = LC2_C22;
"~437~2" : LOCATION = LC3_C22;
"~437~3" : LOCATION = LC4_C22;
"~438~1" : LOCATION = LC4_C17;
"~438~2" : LOCATION = LC7_C17;
"~442~1" : LOCATION = LC7_C18;
":443" : LOCATION = LC7_C20; -- min7
":444" : LOCATION = LC1_C22; -- min6
":445" : LOCATION = LC6_C22; -- min5
":446" : LOCATION = LC3_C17; -- min4
":447" : LOCATION = LC1_C23; -- min3
":448" : LOCATION = LC1_C17; -- min2
":449" : LOCATION = LC5_C23; -- min1
":450" : LOCATION = LC2_C18; -- min0
"~451~1" : LOCATION = LC2_C11;
"~451~2" : LOCATION = LC2_C5 ;
":464" : LOCATION = LC1_C11;
":465" : LOCATION = LC1_C9 ;
":488" : LOCATION = LC2_C8 ;
":512" : LOCATION = LC5_C11;
":513" : LOCATION = LC2_C9 ;
"~535~1" : LOCATION = LC3_C5 ;
"~539~1" : LOCATION = LC8_C5 ;
":540" : LOCATION = LC3_C8 ;
":550" : LOCATION = LC4_C6 ;
":553" : LOCATION = LC6_C11;
":554" : LOCATION = LC7_C9 ;
":557" : LOCATION = LC4_C8 ;
":558" : LOCATION = LC5_C6 ;
":578" : LOCATION = LC7_C11;
":579" : LOCATION = LC8_C9 ;
":582" : LOCATION = LC6_C8 ;
":583" : LOCATION = LC8_C6 ;
"~602~1" : LOCATION = LC3_C11;
"~605~1" : LOCATION = LC5_C5 ;
"~606~1" : LOCATION = LC7_C8 ;
"~606~2" : LOCATION = LC8_C8 ;
"~609~1" : LOCATION = LC7_C6 ;
":610" : LOCATION = LC7_C5 ; -- hour7
":611" : LOCATION = LC8_C11; -- hour6
":612" : LOCATION = LC4_C9 ; -- hour5
":613" : LOCATION = LC4_C5 ; -- hour4
":614" : LOCATION = LC1_C8 ; -- hour3
":615" : LOCATION = LC5_C8 ; -- hour2
":616" : LOCATION = LC1_C6 ; -- hour1
":617" : LOCATION = LC6_C6 ; -- hour0
":631" : LOCATION = LC1_C5 ;
":632" : LOCATION = LC8_C21;
":633" : LOCATION = LC3_C9 ;
":634" : LOCATION = LC5_C9 ;
":659" : LOCATION = LC5_C21;
":660" : LOCATION = LC6_C9 ;
":661" : LOCATION = LC1_C14;
":662" : LOCATION = LC4_C21;
":687" : LOCATION = LC8_C20;
":688" : LOCATION = LC1_C12;
":689" : LOCATION = LC7_C21;
":690" : LOCATION = LC8_C17;
":715" : LOCATION = LC6_C12;
":716" : LOCATION = LC2_C24;
":717" : LOCATION = LC3_C21;
":718" : LOCATION = LC2_C21;
":743" : LOCATION = LC6_C14;
":744" : LOCATION = LC6_C15;
":745" : LOCATION = LC7_C24;
":746" : LOCATION = LC4_C18;
":771" : LOCATION = LC8_C12;
":772" : LOCATION = LC1_C16;
":773" : LOCATION = LC7_C15;
":774" : LOCATION = LC6_C21;
END;
INTERNAL_INFO "time1"
BEGIN
DEVICE = EPF10K10LC84-3;
OD4P1 : LORAX = "1:FB4->LC2_C10,->LC7_C14,->LC3_C15,->LC1_C24,->LC1_C18,->LC2_C16,->LC5_C16,->LC8_C15,->LC1_C21,->LC7_C20,->LC1_C22,->LC6_C22,->LC3_C17,->LC1_C23,->LC1_C17,->LC5_C23,->LC2_C18,->LC7_C5,->LC8_C11,->LC4_C9,->LC4_C5,->LC1_C8,->LC5_C8,->LC1_C6,->LC6_C6,->LC1_C5,->LC8_C21,->LC3_C9,->LC5_C9,->LC5_C21,->LC6_C9,->LC1_C14,->LC4_C21,->LC8_C20,->LC1_C12,->LC7_C21,->LC8_C17,->LC6_C12,->LC2_C24,->LC3_C21,->LC2_C21,->LC6_C14,->LC6_C15,->LC7_C24,->LC4_C18,->LC8_C12,->LC1_C16,->LC7_C15,->LC6_C21|";
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -