📄 config_controller.pin
字号:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCCINT : Dedicated power pin, which MUST be connected to VCC (3.3V).
-- VCCIO : Dedicated power pin, which MUST be connected to VCC (Refer to
-- the table below for voltage).
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
-- NON_MIGRATABLE: This pin cannot be migrated.
---------------------------------------------------------------------------------
Quartus II Version 4.1 Build 181 06/29/2004 SJ Full Version
CHIP "config_controller" ASSIGNED TO AN: EPM7128AETC100-7
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
a[0] : 1 : output : LVTTL : : : Y
a[1] : 2 : output : LVTTL : : : Y
VCCIO : 3 : power : : 3.3V : :
TDI : 4 : input : LVTTL : : : N
a[2] : 5 : output : LVTTL : : : Y
a[3] : 6 : output : LVTTL : : : Y
a[4] : 7 : output : LVTTL : : : Y
a[5] : 8 : output : LVTTL : : : Y
a[6] : 9 : output : LVTTL : : : Y
a[7] : 10 : output : LVTTL : : : Y
GND : 11 : gnd : : : :
a[8] : 12 : output : LVTTL : : : Y
a[9] : 13 : output : LVTTL : : : Y
a[10] : 14 : output : LVTTL : : : Y
TMS : 15 : input : LVTTL : : : N
a[11] : 16 : output : LVTTL : : : Y
a[12] : 17 : output : LVTTL : : : Y
VCCIO : 18 : power : : 3.3V : :
a[13] : 19 : output : LVTTL : : : Y
a[14] : 20 : output : LVTTL : : : Y
a[15] : 21 : output : LVTTL : : : Y
a[16] : 22 : output : LVTTL : : : Y
a[17] : 23 : output : LVTTL : : : Y
a[18] : 24 : output : LVTTL : : : Y
a[19] : 25 : output : LVTTL : : : Y
GND : 26 : gnd : : : :
flash_a20 : 27 : output : LVTTL : : : Y
flash_a21 : 28 : output : LVTTL : : : Y
flash_a22 : 29 : output : LVTTL : : : Y
flash_oe_n : 30 : output : LVTTL : : : Y
flash_rw_n : 31 : output : LVTTL : : : Y
flash_cs_n : 32 : output : LVTTL : : : Y
GND* : 33 : : : : :
VCCIO : 34 : power : : 3.3V : :
GND* : 35 : : : : :
GND* : 36 : : : : :
GND* : 37 : : : : :
GND : 38 : gnd : : : :
VCCINT : 39 : power : : 3.3V : :
GND* : 40 : : : : :
GND* : 41 : : : : :
GND* : 42 : : : : :
GND : 43 : gnd : : : :
GND* : 44 : : : : :
GND* : 45 : : : : :
GND* : 46 : : : : :
GND* : 47 : : : : :
GND* : 48 : : : : :
GND* : 49 : : : : :
GND* : 50 : : : : :
VCCIO : 51 : power : : 3.3V : :
GND* : 52 : : : : :
GND* : 53 : : : : :
GND* : 54 : : : : :
GND* : 55 : : : : :
GND* : 56 : : : : :
GND* : 57 : : : : :
GND* : 58 : : : : :
GND : 59 : gnd : : : :
GND* : 60 : : : : :
flash_reset_n : 61 : output : LVTTL : : : Y
TCK : 62 : input : LVTTL : : : N
pld_data0 : 63 : output : LVTTL : : : Y
pld_msel0 : 64 : output : LVTTL : : : Y
pld_msel1 : 65 : output : LVTTL : : : Y
VCCIO : 66 : power : : 3.3V : :
user_led : 67 : output : LVTTL : : : Y
GND* : 68 : : : : :
loading_led : 69 : output : LVTTL : : : Y
error_led : 70 : output : LVTTL : : : Y
D[0] : 71 : input : LVTTL : : : Y
D[1] : 72 : input : LVTTL : : : Y
TDO : 73 : output : LVTTL : : : N
GND : 74 : gnd : : : :
D[2] : 75 : input : LVTTL : : : Y
D[3] : 76 : input : LVTTL : : : Y
D[4] : 77 : input : LVTTL : : : Y
D[5] : 78 : input : LVTTL : : : Y
D[6] : 79 : input : LVTTL : : : Y
D[7] : 80 : input : LVTTL : : : Y
GND* : 81 : : : : :
VCCIO : 82 : power : : 3.3V : :
GND* : 83 : : : : :
GND* : 84 : : : : :
config_done : 85 : input : LVTTL : : : Y
GND : 86 : gnd : : : :
cpld_clkosc : 87 : input : LVTTL : : : Y
GND+ : 88 : : : : :
reset_n : 89 : input : LVTTL : : : Y
GND+ : 90 : : : : :
VCCINT : 91 : power : : 3.3V : :
status_n : 92 : input : LVTTL : : : Y
GND* : 93 : : : : :
GND* : 94 : : : : :
GND : 95 : gnd : : : :
GND* : 96 : : : : :
DCLK : 97 : output : LVTTL : : : Y
config_n : 98 : output : LVTTL : : : Y
GND* : 99 : : : : :
GND* : 100 : : : : :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -