随着科技发展及工业4.0 进程推进,机械臂应用范围越来越广,并演化出各种各样的机械臂,如码垛机械臂、焊接机械臂、装配机械臂以及手术机械臂等。现利用solidworks 进行三维建模,设计制作一款基于stm32f103c8t6 单片机的主从式桌面级机械臂,该机械臂包括一个主动机械臂和一个从动机械臂,采用蓝牙传输信号方式进行同步运动,并且详细介绍了该机械臂材料选择、结构设计、工作原理、组成部分和设计特点。With the development of science and technology and the advancement of Industry 4.0, the application range of the mechanical arm has become wider and wider, and various types of mechanical arms, such as palletizing robot arms, welding robot arms, assembly robot arms, and surgical robot arms, have been developed. Now using solidworks for 3D modeling, design and manufacture a master-slave desktop-level robot arm based on stm32f103c8t6 single-chip microcomputer. The robot arm includes an active robot arm and a slave robot arm, which uses Bluetooth to transmit signals for synchronous motion. The material selection, structural design, working principle, components and design features of the manipulator are introduced.
标签： stm32f103c8t6 单片机
上传时间： 2022-03-27
上传用户：
本系统基于STM32单片机设计的非接触式电流检测控制系统,通过OPA548片将所给任意信号放大,由100Ω电阻和INA128芯片进行电流电压转换放大后,利用STM32单片机对获取的电压信号以0.488μs频率采样,利用STM32单片机的FFT库,获得信号的谐波信息。测量电流信号精准,该设计可广泛应用在以STM32单片机为核心控制器件的新型仪表中,性能精准且抗干扰能力强。This system is a non-contact current detection and control system based on STM32 single chip microcomputer. It amplifiesany signal through OPA548 chip, converts and amplifies the current and voltage by 100 Ω resistance and INA128 chip. The obtainedvoltage signal is sampled at the frequency of 0.488 μs by STM 32 single chip microcomputer, and the harmonic information of the signalis obtained by the FFT library of STM 32 single chip microcomputer. The measurement of current signal is accurate. This design can bewidely used in a new instrument with STM 32 single chip microcomputer as its core control device, with accurate performance and stronganti-interference capability.
上传时间： 2022-03-27
上传用户：
入室抢劫事件屡见不鲜,针对此现象进行分析不难发现,造成失窃事件的极大原因是人们慵懒和意识差等不良性格造成习惯性不锁门.本文以STC89C52单片机为基础,设计了一种基于人体红外传感器的自动关门锁门装置,来解决此类问题.The incidents of burglary are so common. It is not difficult to find that the main reason for the burglary is the habit of unlocking of doors caused by people's laziness and poor consciousness. Based on the single chip microcomputer of STC89C52, a device used with infrared sensor of human body is introduced in this paper, which can achieve the effect of automatic closing and locking doors.
上传时间： 2022-03-27
上传用户：canderile
CAN总线是汽车上应用最广泛的车载网络总线,具有实时性强、可靠性高、成本低等优点。鉴于此,介绍了一种利用飞思卡尔系列单片机MC9S12XS128作为控制器,利用其内部的MSCAN模块、CAN收发器TJA1040等外围元件进行CAN总线通信节点设计。该设计能够实现CAN总线数据的发送与接收,可应用于汽车及其他各种CAN总线通信系统。CAN bus is the most widely used on-board network bus in automobiles. It has the advantages of realtime, high reliability and low cost. In view of this,this paper introduces the design of CAN bus communication node by using Freescale MC9S12XS128 as controller,using its internal MSCAN module,CAN transceiver TJA1040 and other peripheral components. This design can realize the sending and receiving of CAN bus data,and can be used in automobile and other CAN bus communication systems.
上传时间： 2022-03-27
上传用户：
数字示波器功能强大,使用方便,但是价格相对昂贵。本文以Ti的MSP430F5529为主控器,以Altera公司的EP2C5T144C8 FPGA器件为逻辑控制部件设计数字示波器。模拟信号经程控放大、整形电路后形成方波信号送至FPGA测频,根据频率值选择采用片上及片外高速AD分段采样。FPGA控制片外AD采样并将数据输入到FIFO模块中缓存,由单片机进行频谱分析。测试表明:简易示波器可以实现自动选档、多采样率采样、高精度测频及频谱分析等功能。Digital oscilloscope is powerful and easy to use, but also expensive. The research group designed a low-cost digital oscilloscope, the chip of MSP430F5529 of TI is chosen as the main controller and the device of EP2C5T144C8 of Altera company is used as the logic control unit. Analog signal enter the programmable amplifier circuit, shaping circuit and other pre-processing circuit. The shaped rectangular wave signal is sent to FPGA for measure the frequency. According to the frequency value to select AD on-chip or off-chip high-speed AD for sampling. FPGA controls the off-chip AD sampling and buffers AD data by FIFO module. The single chip microcomputer receives the data, and do FFT for spectrum analysis. The test shows that the simple oscilloscope can realize automatic gain selection, sampling at different sampling rates, high precision frequency measurement and spectrum analysis.
上传时间： 2022-03-27
上传用户：
多功能智能遥控窗帘系统广泛地应用于家居、办公室等场合,同时也是智能家居的一部分。该设计主要利用STC89C52单片机核心电路、光敏电阻电路、步进电机电路、温湿度传感器、红外线控制电路、AD转换电路、LCD1602液晶显示屏等模块完成精确控制窗帘的开和关。multi-functional intelligent remote control curtain system is widely used in home,office and other occasions,and is also part of intelligent home.The design mainly uses STC89 C52 single-chip core circuit,photosensitive resistor circuit,stepping motor circuit,temperature and humidity sensor,infrared control circuit,AD conversion circuit,LCD1602 LCD display and other modules to achieve accurate control of the curtain opening and closing.
上传时间： 2022-03-28
上传用户：
因此，您想编写一个内核模块。您知道C，您已经编写了一些可以作为进程运行的常规程序，现在您想知道真正的动作在哪里，一个通配指针可以擦掉文件系统，核心转储意味着重新启动。内核模块到底是什么？模块是可以根据需要加载和卸载的代码段。它们扩展了内核的功能，而无需重新引导系统。例如。模块驱动程序的一种类型是设备驱动程序，它允许内核访问没有模块的系统硬件，我们将不得不构建单片内核并将新功能直接添加到内核映像中，除了具有更大的内核之外，这还具有缺点每次我们想要新功能时都要求我们重建并重新启动内核的过程So, you want to write a kernel module. You know C, you, ve written a few normal programs to run as processes, and now you want to get to where the real action is, to where a single wild pointer can wipe out your file system and a core dump means a reboot.What exactly is a kernel module? Modules are pieces of code that can be loaded and unloaded into th upon demand. They extend the functionality of the kernel without the need to reboot the system. For example.one type of module is the device driver, which allows the kernel to access hardware connected to the syste without modules, we would have to build monolithic kernels and add new functionality directly into the em ernel image, Besides having larger kernels
标签： linux
上传时间： 2022-03-30
上传用户：
Universal Serial Bus 4.0 Specification.
标签： usb
上传时间： 2022-04-02
上传用户：默默
本文首次设计并验证了基于macom三合一芯片设计的光模块电路,该电路旨在提供一种满足SFF-8472中规定的数字诊断功能的低成本SFP+模块。电路采用激光器驱动、限幅放大器、控制器以及时钟恢复单元集成的单芯片,在保证高精度数字诊断功能基础上,实现了低成本高可靠的特点。该电路在光接收接口组件与激光器驱动和限幅放大器单元的限幅放大器部分之间接入滤波器来提高模块的灵敏度及信号质量。在控制器单元的数字电位器的引脚上采用外加电阻的方式避免出现上电不发光的故障问题。该研究结果为下一代SFP-DD光模块设计与开发工作,奠定了一定的理论与实践基础。This paper designs and validates the optical module circuit based on the MACOM Trinity chip for the first time.This circuit aims to provide a low-cost SFP module which meets the digital diagnosis function specified in SFF-8472.The circuit uses a single chip integrated with laser driver,limiting amplifier,controller and clock recovery unit.On the basis of ensuring high precision digital diagnosis function,it achieves the characteristics of low cost and high reliability.The circuit connects a filter between the optical receiving interface module and the limiting amplifier part of the laser driver and limiting amplifier unit to improve the sensitivity and signal quality of the module.The pin of the digital potentiometer in the controller unit is equipped with an external resistance to avoid the problem of power failure.The research results lay a theoretical and practical foundation for optical module design in high-speed data center.
上传时间： 2022-04-03
上传用户：
1.bus indices out of range 总线分支索引超出范围2.Bus range syntax errors 总线范围的语法错误3.Illegal bus range values 非法的总线范围值4.Illegal bus definitions 定义的总线非法5.Mismatched bus label ordering 总线分支网络标号错误排序6.Mismatched bus/wire object on wire/bus 总线/导线错误的连接导线/总线
标签： Altium Designer
上传时间： 2022-04-17
上传用户：qdxqdxqdxqdx
