The PW2163 is a high efficiency 500 kHz synchronous step-down DC-DC converter capable ofdelivering 3A current. The PW2163 operates over a wide input voltage range from 4.5V to 18V andintegrates main switch and synchronous switch with very low RDS(ON) to minimize the conductionloss. Low output voltage ripple and small external inductor and capacitor sizes are achieved with 500kHz switching frequency. It adopts the instant PWM architecture to achieve fast transient responsesfor high step down applications
标签： pw2163
上传时间： 2022-02-11
上传用户：
The PW2053 is a high-efficiency monolithic synchronous buck regulator using a constantfrequency, current mode architecture. The device is available in an adjustable version. Supply currentwith no load is 40uA and drops to <1uA in shutdown. The 2.5V to 5.5V input voltage range makesthe PW2053 ideally suited for single Li-Ion battery powered applications. 100% duty cycle provideslow dropout operation, extending battery life in portable systems. PWM/PFM mode operationprovides very low output ripple voltage for noise sensitive applications. Switching frequency isinternally set at 1.2MHz, allowing the use of small surface mount inductors and capacitors. Lowoutput voltages are easily supported with the 0.6V feedback reference voltage
标签： pw2053
上传时间： 2022-02-14
上传用户：jason_vip1
PW1555 is a programmable current limit switch with input voltage range selection and outputvoltage clamping. Extremely low RDS(ON) of the integrated protection N-channel FET helps toreduce power loss during the normal operation. Programmable soft-start time controls the slew rateof the output voltage during the start-up time. Independent enable control allows the complicatedsystem sequencing control. It integrates the over-temperature protection shutdown andautorecovery with hystersis
标签： pw1555
上传时间： 2022-02-14
上传用户：
高清电子书-C++ Primer Plus, 第6版英文版 1438页Learning C++ is an adventure of discovery, particularly because the language accommodates several programming paradigms, including object-oriented programming, generic programming, and the traditional procedural programming.The fifth edition of this book described the language as set forth in the ISO C++ standards, informally known as C++99 and C++03, or, sometimes as C++99/03. (The 2003 version was largely a technical correction to the 1999 standard and didn’t add any new features.) Since then, C++ continues to evolve.As this book is written, the international C++ Standards Committee has just approved a new version of the standard.This standard had the informal name of C++0x while in development, and now it will be known as C++11. Most contemporary compilers support C++99/03 quite well, and most of the examples in this book comply with that standard. But many features of the new standard already have appeared in some implementations, and this edition of C++ Primer Plus explores these new features. C++ Primer Plus discusses the basic C language and presents C++ features, making this book self-contained. It presents C++ fundamentals and illustrates them with short, to-the-point programs that are easy to copy and experiment with.You learn about input/output (I/O), how to make programs perform repetitive tasks and make choices, the many ways to handle data, and how to use functions.You learn about the many features C++ has added to C, including the followi
标签： C++
上传时间： 2022-02-19
上传用户：trh505
5G通信系统中massive-MIMO-FBMC技术的结合概述摘要为了应对第五代移动通信（5G）中更高数据率和更低时延的需求，大规模MIMO （massive multiple-input multiple-output）技术已经被提出并被广泛研究。大规模 MIMO技术能大幅度地提升多用户网络的容量。而在5G中的带宽研究方面，特别 是针对碎片频谱和频谱灵活性问题，现有的正交频分多址（Orthogonal Frequency Division Multiplexing, OFDM）技术不可能应对未来的挑战，新的波形方案需要 被设计出来。基于此，FBMC（filter bank multicarrier）技术由于具有比OFDM低 得多的带外频谱泄露而被受到重视，并已被标准推进组IMT-2020列为5G物理层 的主要备选方案之一。 本文首先回顾了5G中波形设计方案（主要是FBMC调制）和大规模多天线系 统（即massive MIMO）的现有工作和主要挑战。然后，简要介绍了基于Massive MIMO的FBMC系统中的自均衡性质，该性质可以用于减少系统所需的子载波数 目。同时，FBMC中的盲信道跟踪性质可以用于消除massive MIMO系统中的导频 污染问题。尽管如此，如何将FBMC技术应用于massive MIMO系统中的误码率、 计算复杂度、线性需求等方面仍然不明确，未来更多的研究工作需要在massive MIMO-FBMC方面展开来。 关键词：大规模MIMO；FBMC；自均衡；导频污染；盲均衡
上传时间： 2022-02-25
上传用户：
Single chip TFT-LCD Controller/Driver with On-chip Frame Memory (FM) Display Resolution: 240*RGB (H) *320(V) Frame Memory Size: 240 x 320 x 18-bit = 1,382,400 bits LCD Driver Output Circuits- Source Outputs: 240 RGB Channels- Gate Outputs: 320 Channels- Common Electrode Output Display Colors (Color Mode)- Full Color: 262K, RGB=(666) max., Idle Mode Off- Color Reduce: 8-color, RGB=(111), Idle Mode On Programmable Pixel Color Format (Color Depth) for Various Display Data input Format- 12-bit/pixel: RGB=(444)- 16-bit/pixel: RGB=(565)- 18-bit/pixel: RGB=(666) MCU Interface- Parallel 8080-series MCU Interface (8-bit, 9-bit, 16-bit & 18-bit)- 6/16/18 RGB Interface(VSYNC, HSYNC, DOTCLK, ENABLE, DB[17:0])- Serial Peripheral Interface(SPI Interface)- VSYNC Interface
上传时间： 2022-03-04
上传用户：
M.NT68676.2A is a monitor control board, which is suitable for Asia-Pacific market. It can supportLED/LCD panels which resolution is up to 2048×1152.M.NT68676.2A can synchronize with computer automatically. Synchronization requires thesynchronous signal which horizontal and vertical sync are separated.M.NT68676.2A can support dynamic contrast control, headphone input and Digital volume controlsimultaneously.
标签： 乐华驱动板
上传时间： 2022-03-13
上传用户：kent
能源短缺和环境恶化是人类共同面临的挑战。开发新型清洁能源是解决能源短缺和环境恶化的捷径，但是太阳能能源不连续和不稳定的缺点影响其单独使用的效果。为了解决这个问题，可以选择使用多种性质互补的能源联合供电，相互弥补彼此的不足，以达到连续稳定的电能输出。基于双输入直流变换器（Multipk-input Converter，MC）的光电互补系统相对于风光互补系统而言，在太阳能功率充足时，可以选择将多余的能量进行并网，省去了蕃电池等储能设备，也可大大节约成本，简化控制：而且电网是全天候的，比纯新能源联合系统更加可靠。因此本文将对光电互补系统，研究其拓扑、能量管理和系统参数设计等等在隔离应用的中小功率场合，推挽变换器控制方便，结构简单，应用广泛传统的多输入推挽变换器结构复杂，成本高。通过分析MIC的生成方法，利用脉冲电压源 Pulsating Voltage Source Ce，PⅤSC或者脉冲电流源（Pulsating Curren Source Cell，PCSC）中联或者并联构成简单实用的一族多输入推挽变换器，详细分析了BUCK型PVSC串联构成的双输入推挽变换器的小信号模型和控制方式，为了能够提供交流输出，本文还详细分析了半桥逆变电路的控制方式，并推导出其数学控制模型通过分析系统的工作模式、能量管理策略和不同控制方式对系统的影响，阐叨基于双输入推挽变换器的光电互补系统的工作原理。并对系统软件涉及到的太阳能最大功率跟踪、光电互补控制和逆变控制等算法进行重点研究功率电路参数设计合理与否，直接影响着系统的性能和指标，其中推挽变压器和滤波器的参数设计尤为重要，为此专门给出了硬件参数设计步骤；然后，根据软件算法，设计了控制软件流程图来更清晰的表达软件控制的思想软件参数是影响系统鲁棒性和快速性的另一个关键因素，在硬件设计的基础上，对软件参数进行优化设计，并利用 Simulink软件对设计参数进行仿真分析和修正。然后采用TMS320F2809作为控制芯片，搭建了实验原理样机，并进行了相关验证实验
标签： 推挽变换器
上传时间： 2022-03-16
上传用户：
电子书-RTL Design Style Guide for Verilog HDL540页A FF having a fixed input value is generated from the description in the upper portion of Example 2-21. In this case, ’0’ is output when the reset signal is asynchronously input, and ’1’ is output when the START signal rises. Therefore, the FF data input is fixed at the power supply, since the typical value ’1’ is output following the rise of the START signal. When FF input values are fixed, the fixed inputs become untestable and the fault detection rate drops. When implementing a scan design and converting to a scan FF, the scan may not be executed properl not be executed properly, so such descriptions , so such descriptions are not are not recommended. recommended.[1] As in the lower part of Example 2-21, be sure to construct a synchronous type of circuit and ensure that the clock signal is input to the clock pin of the FF. Other than the sample shown in Example 2-21, there are situations where for certain control signals, those that had been switched due to the conditions of an external input will no longer need to be switched, leaving only a FF. If logic exists in a lower level and a fixed value is input from an upper level, the input value of the FF may also end up being fixed as the result of optimization with logic synthesis tools. In a situation like this, while perhaps difficult to completely eliminate, the problem should be avoided as much as possible.
标签： RTL verilog hdl
上传时间： 2022-03-21
上传用户：canderile
以AT89S52单片机为控制核心,采用电容降压技术,Buck电路拓扑,PWM驱动模块和功率器件散热设计,通过高速的数据采集、主功率输入输出模块和控制模块,设计一种新型智能车载充电器.在充电过程中,通过负脉冲瞬间放电实现对铅酸蓄电池的再生修复,提高电池的有效容量,延长使用寿命.该充电器体积小、速度快、效率高、可靠性好.With AT89S52 single chip computer as the control core,a new type of intelligent car-carried charger was designed by using capacitance step-down technology,Buck circuit topology,PWM driving module and power device heat dissipation design,through high-speed data acquisition,main power input and output module and control module.In the charging process,the regeneration and repair of lead-acid batteries are realized by instantaneous discharge of negative pulse,which improves the effective capacity of batteries and prolongs their service life.The charger has the advantages of small size,fast speed,high efficiency and good reliability.
标签： 车载充电器
上传时间： 2022-03-27
上传用户：
