为了提高超高频RFID系统中阅读器在低信噪比的情况下仍具有较高的识别能力,提出一种基于FPGA系统结合软件无线电方法实现超高频RFID射频前端电路方案。超高频射频识别系统必须符合EPC Class 1generation 2标准,所设计的电路系统以Xilinx公司的XC6SLX16-2CSG324FPGA芯片为硬件基础,将数字基带调制解调和中频滤波电路在FPGA系统中设计实现,重点阐述了射频前端电路的设计结构、AD/DA转换电路,以及数字滤波器的设计。实验结果表明,所设计的超高频RFID阅读器简化了前端电路系统结构,提升了稳定性,增强了抗干扰能力。该电路系统在信噪比较低的情况下,能够较好地实现915MHz频率的射频接收和发送。In order to improve the reader UHF RFID system still has a higher ability to identify,in the case of low signal-to-noise ratio.The UHF RFID systems must comply with EPC Class 1 generation 2 standard.In this paper,the design of the circuit system based on Xilinx＇s XC6SLX16-2CSG324 FPGA chip,and presents UHF RFID RF front-end circuit with software radio based on FPGA system.Digital baseband modem and IF filter circuit is designed and implemented in the FPGA system,and focused on designing the structure of the RF front-end circuit,AD/DA conversion circuits,and digital filter.Experimental results show that the UHF RFID reader de...
标签： 915mhz 超高频 rfid 阅读 射频 前端 电路 设计
上传时间： 2022-04-17
上传用户：shjgzh
介绍一种万能模拟信号输入采集电路,可以同时支持电压、电流、热电偶、热电阻等常见的工业类型信号,方便后级电路的测量。该研究成果通过不断优化和完善,已成功应用到了中控仪表的新产品中。The paper introduces a collection circuit of universal signal input. The circuit support voltage, current, thermocouple, thermal resistance and other common industrial type signal. The research results, which has been continuous optimized and improved, has been successfully applied to the new production of Zhejiang Supcon Instrument Co., Ltd.
标签： 采集电路
上传时间： 2022-04-21
上传用户：slq1234567890
为适应双向DC/DC功率变换的电流采样需求,一种高精度高边电流采样电路被提出。其基本思想是在功率电路的高边串入采样电阻,借助电流镜原理并引入偏置电流电路,将双向电流均转换为正向电压输出。通过理论分析与仿真结合的方法对电流镜采样原理及4种不同的偏置电流电路方案进行对比,最后通过实验数据验证了高精度高边电流采样电路的有效性。实验数据表明,该采样电路可在-25~75℃的温度工作范围内,针对-10~＋10 A范围内的电流采样实现优于5%的采样精度。Current sensing plays an important role in controlling,monitoring or protection functions of power systems.To meet the current sensing requirement of bidirectional DC/DC converters,a high-accuracy bidirectional current sensing circuit is proposed.The proposed current sensing circuit inserts a resistor in the path of the current to be sensed,while the current mirror and biased current circuit are introduced.Therefore,the bidirectional current can be expressed by positive voltage.By theoretical analysis and simulation,the sampling theory is analyzed and four biased current circuits are compared.At last,experimental results verified the proposed method.It is demonstrated that the proposed current sensing circuit can achi...
上传时间： 2022-04-22
上传用户：
随着科技的发展，人们在日常生活中使用的电器越来越多，电子设备的电磁兼容性（EMC）也越来越重要。所以，人们对电子设备的电磁兼容性的要求也越来越严格，越来越规范。而在市场竞争中，如何降低成本、减少设备体积，是各电子设备制造厂家重点研究的课题。通过对开关电源的EMI滤波电路的类别和相应的技术特点进行分析，设计出一种既能提高性能，又能降低成本的滤波电路。With the development of technology, appliances people use in their daily lives, more and more electronic devices electromagnetic compatibility （ EMC ） has become increasingly important. So, people electromagnetic compatibility requirements of electronic devices have become increasingly stringent, more and more standardized. The competition in the market, how to reduce costs, reduce equipment size, is the subject of the electronic equipment manufacturer focused on research. Through the technical characteristics of the respective category and the EMI filter circuit switching power supply is analyzed both designed to improve a performance of the filter circuit can reduce the cost.
上传时间： 2022-04-23
上传用户：
超声波换能器作为一种实用的检测手段，能实现声波所携带的信息和电能之间转换。它的性能优良，价格低廉，操作方便，易于调试，因此在工农业生产中发挥着重要的作用。但目前换能器驱动电路的发射频率多为40 kHz，本文针对1 MHz的超声波换能器电路进行了设计，主要介绍了它的发射驱动电路和接收驱动电路的设计方案，并对它们的功能进行了详细地说明。最后搭建实验平台，并对电路的输入、输出模块进行了测试。实验结果表明，换能器电路运行良好，可以为超声波高精度测量领域的应用提供参考。As a practical means of detection, ultrasonic transducer can realize the conversion between theinformation carried by sound wave and electric energy.It has the advantages of excellent performance,low cost, convenient operation and debugging, so plays an important role in industrial and agriculturalproduction.However, the transmitting frequency of the driving circuit for most transducer is 40 kHz.Thecircuit of 1 MHz ultrasonic transducer is designed In this paper. It mainly introduces the emissive drivingcircuit and the receiving circuit design and the detailed function of them. Finally, the experimentalplatform is built, and the circuit of input and output were tested. Experiments show that the transducer＇ s...
上传时间： 2022-04-28
上传用户：
应用无迹卡尔曼滤波算法（UKF）进行锂电池的SOC估计,采用Thevenin二阶RC等效电路模型,对HPPC电池脉冲充放电实验数据进行Matlab处理,得到较为准确的模型.通过在Matlab中编写算法程序,对不同工况的估计值与实际值进行误差估算及对比分析,通过此算法进行SOC估计,得到该算法可有效降低系统误差并纠正SOC的初值偏差.The non trace Calman filter （UKF） is applied to the SOC estimation of lithium battery. The Thevenin two order RC equivalent circuit model is used to process the HPPC battery pulse charge discharge experimental data by Matlab processing, and a more accurate model is obtained. By writing algorithm program in Matlab, the error estimation and comparison analysis of the estimated value and actual value of different states are carried out, and the SOC estimation is carried out by this algorithm. The algorithm can effectively reduce the system error and correct the initial value deviation of the SOC.
标签： 卡尔曼滤波
上传时间： 2022-05-03
上传用户：默默
针对交流电路过零检测电路存在结构复杂、过零点检测不准确、编程繁琐等问题，设计了一种基于LM339的硬件结构简单的过零检测电路。通过仿真软件Mulisim对该设计电路进行了仿真，实验证明了该方案过零检测的可行性、稳定性和可靠性，可直接作为交流电路中CPU的过零信号。Aiming at the problems of AC cilsuit zero crossing detection circuit such as complex structure, zero crossing detection and cumbersome programming, a zero crossing detection circuit with simple hardware structure based on LM339 was designed. The design circuit was simulated by simulation software Mulisim, and the feasibility, stability and reliability of zero crossing detection were proved by experiments, which can be used as zero crossing signal of CPU in AC circuit directly.
上传时间： 2022-05-03
上传用户：
为解决移相全桥电路驱动及相角控制问题,设计了一种数字控制的移相全桥驱动电路.以TPL521为光耦隔离、IR2110为栅极驱动芯片.由DSP产生PWM信号,经过光耦隔离和逻辑电路后送至IR2110进行相角控制.文章对IR2110驱动电路原理进行分析及参数进行设计,对TMS320F28335进行设置并给出部分代码.实验结果表明：通过TMS320F28335可产生的不同相角的PWM波形,满足了移相全桥对不同相角控制的要求.In order to solve the problem of phase-shifted full-bridge circuit driving and phase angle control,a digitally controlled phaseshifted full-bridge driving circuit was designed. TPL521 optocoupler isolation,IR2110 gate driver chip. PWM signals are generated by the DSP and sent to the IR2110 for phase angle control after optocoupler isolation and logic circuits. This text carries on the analysis to the principle of IR2110 drive circuit and parameter design,set up and give out some code to TMS320F28335. The experimental results show that the PWM waveforms with different phase angles generated by TMS320F28335 can meet the requirements of phase-shifted full-bridge control for different phase angles.
上传时间： 2022-05-03
上传用户：zhanglei193
基于PSIM仿真软件，分析了Boost电路拓扑结构，设定了参数要求进行电路仿真设计，通过电路仿真软件PSIM对Boost电路工作在CCM模式下，合理设置占空比参数。实验结果表明理论分析与仿真的一致性和参数设计的正确性，输出电压和电流参数稳定，Boost电路输出效率高。This design is based on PSIM simulation software,analyzes the topology of Boost circuit,sets the parameter re- quirements for circuit simulation design,and reasonably sets the duty cycle parameters for Boost circuit working in CCM mode through PSIM simulation software.The experimental results show that the theoretical analysis and simulation are consis- tent and the parameter design is correct,the output voltage and current parameters are stable.
上传时间： 2022-05-04
上传用户：
本文提出基于AD2S1210的旋变信号转换电路,给出了具体的电路实现方法和配置方法.相比以往的RDC方案,本系统具有精度高,设计灵活,可靠性高等特点,可广泛应用于各种伺服系统中.In this paper, the switching signal conversion circuit based on ADS1210 is proposed, and the specific circuit implementation and configuration method are given. Compared with the previous RDC scheme, this system has the characteristics of high precision, flexible design and high reliability, and can be widely used in various servo systems.
标签： ad2s1210
上传时间： 2022-05-04
上传用户：
