虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

Power-constrained

  • 多功能电子药箱的设计与实现

    基于药物治疗在临床治疗中的重要性,分析目前服药提醒装置存在的不足,以STM32F103VET6单片机为控制核心,设计了一种多功能电子药箱。该系统包括显示模块、语音模块和数据存储模块。显示模块通过触摸屏电路和LED指示灯电路,与语音模块相配合,实现了服药提醒及指导的功能;数据存储模块通过EEPROM存储电路,能够实现掉电时服药信息不丢失的功能。并且为了实现电子药箱的智能化控制,开发了手机APP,两者之间可通过WIFI进行数据通信。经测试,该药箱能够有效地帮助慢性病患者按时、定量、正确服用药物,适合在家庭中推广使用,具有较高的应用价值和实践意义。Based on the importance of drug therapy in clinical treatment, this paper analyzes the shortcomings of current drug reminder devices, and designs a multi-function electronic medicine box with STM32 F103 VET6 microcontroller as the control core. The system includes a display module, a voice module, and a data storage module. The display module cooperates with the voice module through the touch screen circuit and the LED indicator circuit to realize the function of reminding and guiding the medicine;the data storage module can realize the function of not losing the medication information when the power is off through the EEPROM storage circuit.After testing, the medicine box can effectively help chronic diseases patients to take drugs on time, in a quantitative and correct manner,and is suitable for popularization in the family, and has high application value and practical significance.

    标签: 电子药箱

    上传时间: 2022-03-27

    上传用户:

  • 基于STM32F103单片机电流电压采集系统设计

    配电网中,各种配电终端的电流、电压、有功功率及无功功率等模拟量的采集是配电网自动化的重要环节。这些模拟量的采集也是各种仪器和家用电器的必要功能。因此,设计了基于嵌入式STM32F103单片机的交流电压、交流电流及有功功率的采集系统,通过电压互感器TV1005M和电流互感器TA1005M分别检测交流电压和交流电流值;屏幕或者手机APP和WiFi模块互联后,可以实时显示交流电压、交流电流、功率及电量值;通过设定阈值功率,可以实现对电流的监控和对电路的保护。In the distribution network,the collection of analog,such as current,voltage,active power,and reactive power at various distribution terminals is a very important part of distribution network automation. These analog acquisitions are also for various instruments and household appliances. Very important technology. Therefore,an AC voltage,AC current and active power acquisition system based on embedded STM32 F103 machine is designed,and AC voltage and AC current values are detected by voltage transformer TV1005 M and current Transformer TA1005 M respectively;After the screen or mobile phone APP and WiFi modules are interconnected,AC voltage,AC current,power,and power values can be displayed in real time;By setting the threshold power,the current can be monitored and the circuit can be protected.

    标签: stm32f103 单片机 电流电压采集

    上传时间: 2022-03-27

    上传用户:shjgzh

  • 基于STM32单片机控制的智能水杯设计

    本设计介绍了一种基于STM32单片机控制的智能水杯,可利用插口式电源或无线充电底座为加热器提供能量,并在达到某种饮品所需温度时进行保温。水杯内置充电电池,可选用USB接口或无线充电。在水杯内部设置无线模块,用户利用手机App与水杯进行匹配进行加热操作,加热完后水杯会通过手机App和液晶显示屏实时反馈液体温度,通过指示灯显示电量情况等,给用户进行提醒。该智能水杯设计创新,实用价值较高。This paper introduces an intelligent water cup based by STM32 microcontroller,it can provide energy for the heater by socket type power supply or wireless charging base,and hold temperature needed for some kind of drink.Builtedin rechargeable battery,water cup can use USB or wireless charging.The wireless module is set up inside it,and customers can use mobile App to match and heat.After heating,water cup feeds back liquid temperature through the mobile App,and then displays on LCD,reminds users through the indicator light.The intelligent water cup is designed innovatively and has high practical value.

    标签: stm32 单片机

    上传时间: 2022-03-28

    上传用户:

  • Qi无线充电原理

    近距电能传输——高效安全近距电能传输一般基于电磁感应原理进行。在此技术基础上,当接收器邻近发射器时才会进行电能传输。电磁感应技术的历史长达百年,多年米一直应用于各类电子产品中—如此普及全因其简单、高效以及安全技术概览以下将为你简要介绍无线电能传输技术。System Overview(Communication)Receiver sends messagesTo provide control information to the transmitterBy load modulation on the power signaTransmitter receives messagesTo receive control information frorn the recelverBy de-modulation of the reflected loadPower Pick Up( Receiver)Secondary coil (L Serial resonance capacitor (C) for efficient power transfer Parallel resonance capacitor(C, )for detection purposes Rectifier: full bridge(diode, or switched)+ capacitor Output switch for(dis)connecting the loadReceiver modulates load by Switching modulation resistor(R,n),or Switching modulation capacitor(Ca)Transmitter de-modulates reflected load by Sensing pnmary coil curent (p)and/o Sensing primary coil voltage (V,

    标签: qi 无线充电

    上传时间: 2022-03-31

    上传用户:

  • Qi无线充电标准V1.0中文版

    该系统描述无线功率传输是出版的力量,无线通信联合体采用无线力量联盟与 Convenient Power有限公司密切合作,富尔顿创新公司、国家半导体公司,诺基亚公司,奥林匹斯成像公司、研究、限制、飞利浦、三洋电子公司。深圳桑菲消费通信有限公司。菲德州仪器有限公司保留所有能量。复制在全部或部分地是被禁止的明示和优先的书面允许的无线能力联盟免责声明本网站内所包含的信息是正确之日出版。然而,无线的力量,也 Convenient Power协会有限公司富尔顿创新公司和国家诺基亚公司半导体公司、企业、科研、奥林匹斯成像议案有限公司、飞利浦、三洋电子公司。深圳桑菲消费通信有限公司。德州仪器有限公司,也将承担任何损失,包括间接的或间接的从使用这个系统描述无线功率传输或依据。本文件的准确性无触点电力传输的方法从一个基站移动设备,它是基于近场磁感应线圈之间。转移的功率大约5W采用适当的二次卷(典型的外部大约40毫米)的尺寸。操作频率范围:110-205HZ之间。支持两种方法在移动设备上放置在基站的表面。帮助用户指引正确位置的移动设备在表面形成一层。通过基站提供一个或几个固定位置的表面。任意位置可以免费定位的移动设备上表面形成一层可提供电力基站位置通过任何表面。一个简单的通信协议使移动设备能够充分的控制能力转让。可观的设计系统的灵活性为整合成一个移动的装置。非常低的备用电源(执行),可依赖安装1.3一致性和参本文档中所有的规定除非特别指出,以及其他推荐或随意或信息。为了避免任何疑惑,“应当”表示个强制性的行为的指定的成分如下。它是一种违反这一系统的无线通信电源转换描述指定的成分不具有行为所起义的此外“应该?示推的行少下它不是种违反这一系统的描如果指定的无线功率传输组件都有理由偏离的定义行为。最后这个词“可能”表示一个可选的行为的特定组件如下。它是到指定的成分是否具有明确的行为(从)或无偏差不是。此外在这个文件中提供的规格还应当符合产品实现在系统提供的规格说明如下。而且,相关的部分下面列出适用的国际标准。如果多个修改任何系统的存在描述或国际标准适用于下面列出的是那个被修改在最近出版的发布日期的单据。

    标签: 无线充电

    上传时间: 2022-03-31

    上传用户:20125101110

  • MOSFET开关过程的研究及米勒平台振荡的抑制

    设计功率MOSFET驱动电路时需重点考虑寄生参数对电路的影响。米勒电容作为MOSFET器件的一项重要参数,在驱动电路的设计时需要重点关注。重点观察了MOSFET的开通和关断过程中栅极电压、漏源极电压和漏源极电流的变化过程,并分析了米勒电容、寄生电感等寄生参数对漏源极电压和漏源极电流的影响。分析了栅极电压在米勒平台附近产生振荡的原因,并提出了抑制措施,对功率MOSFET的驱动设计具有一定的指导意义。When designing the drive circuit of power MOSFET,the influence of parasitic parameters on the circuit should be concerned.As an important parameter of MOSFET device,Miller capacitance should be considered in the design of drive circuit.The variation of gate voltage,drain source voltage and drain source current during the turn-on and turn-off of MOSFET were observed.The influences of parasitic parameters such as Miller capacitance and parasitic inductance on drain source voltage and drain source current were analyzed.The reasons of gate voltage oscillation nearby Miller plateau were analyzed,and the restraining measures were put forward.This research was instructive for the drive design of power MOSFET.

    标签: mosfet

    上传时间: 2022-04-02

    上传用户:默默

  • 基于STM32的智能小车四轮驱动控制系统设计

    在传统智能小车驱动电路设计中,较多考虑使用直流电机还是步进电机,电机功率、能耗等性能参数。使用具有armCortexM4内核的STM32嵌入式平台控制四轮的4个直流电机。文章基于PWM技术及PID算法,对四轮进行精准地速度、转向及启停控制,实验表明此小车具有优越各种地形适应能力。In the traditional intelligent car drive circuit design,DC motor or stepping motor,motor power,energy consumption and other performance parameters are considered.The four DC motors with four wheels are controlled by STM32 embedded platform with arm Cortex M4 kernel.Based on the PWM technology and PID algorithm,the accurate ground speed,steering,and start-stop control of the four wheels are carried out.The experiment shows that the vehicle has the superior adaptability to all kinds of terrains.

    标签: stm32 智能小车 控制系统

    上传时间: 2022-04-02

    上传用户:

  • 200W全数字开关电源设计

    通过采用无桥PFC和半桥LLC谐振变换器作为数字开关电源的主变换拓扑,基于STM32系列微控制器的全数字控制PFC和DC-DC变换器,首先对数字化开关电源方案进行对比,然后阐述了200W数字开关电源整体方案,并对数字开关电源的无桥PFC和半桥LLC变换器进行系统研究。By using a bridgeless PFC and a half-bridge LLC resonant converter as the main conversion topology of the digital switching power supply,the all-digital control PFC and DC-DC converter based on the STM32 series of microcontrollers,firstly the digital switching power supply scheme is compared,and then the overall scheme of 200 W digital switching power supply is expounded, and the bridgeless PFC and half-bridge LLC converter of digital switching power supply are systematically studied.

    标签: 数字开关电源

    上传时间: 2022-04-02

    上传用户:qingfengchizhu

  • 基于UCC28019的PFC电路设计

    为设计高效率、低损耗的PFC电路,本文基于UCC28019进行电路设计。以UCC28019输出的PWM波形来控制Boost升压斩波为核心电路,使电路中的电容交替地充放电、电感交替的储存和释放能量,最后实现在输入AC20V~24V电压情况下稳定输出DC38V。测试结果表明,系统实现效率为95%左右,电压调整率小于1%,电源功率因数0.99。交流输入电压为19.0-25.8 V时,输出直流电压稳定性较好,电感无明显啸叫且纹波小,具有一定的带负载能力和实用性。In order to design the PFC circuit with high efficiency and low loss,this paper designs the circuit based on UCC28019.The PWM waveform output by UCC28019 is used to control boost chopper as the core circuit,which alternately charges and discharges capacitors,stores and releases energy by inductors,and finally achieves stable output of DC38 V under the input voltage of AC20 V~24 V.The test results show that the system achieves about 95% efficiency,the voltage adjustment rate is less than 1%,the power factor is 0.99,and the AC input voltage is 19.0-25.8 V.The output DC voltage stability is good,the inductance has no obvious whistle and the ripple is small,so it has certain load capacity and practicability.

    标签: ucc28019 pfc 电路设计

    上传时间: 2022-04-03

    上传用户:

  • 基于数字信号处理的超声手术刀电源控制电路设计与实现

    目的:自主研制一款超声手术刀电源控制系统,以减少能量的消耗,维持手术刀的正常温度。方法:对超声换能器在谐振附近的等效电路建立模型,并设计基于数字信号处理(DSP)的超声手术刀的硬件控制系统。结果:经对电源控制系统的电路和工作性能测试,生成的电流和电压的有效值等参数,能够及时调整电源的频率,并达到预期的功能指标,使超声手术刀工作在谐振状态。结论:以DSP为核心设计的超声手术刀电源控制系统,测试指标均能够达到预期的要求,能够使系统在谐振状态下工作。Objective: To independently develop a power control system of ultrasonic scalpel so as to reduce the energy consumption and maintain the normal temperature of ultrasonic scalpel. Methods: In this paper, the model of equivalent circuit of ultrasonic transducer nearby syntony was built up, and the hardware control system of ultrasonic scalpel based on digital signal processing(DSP) was designed. Results: Through testing the circuit and work performance of power control system, the series of parameters such as effective value and so on which were produced by this system could adjust frequency of power source in time and attain anticipative functional indicator, and it took the ultrasonic scalpel to work in syntonic situation. Conclusion: The tested indicators of power control system of ultrasonic scalpel based on the kernel design of DSP can attain anticipative requirement, and can take this system to work in syntonic situation.

    标签: 数字信号处理 超声手术刀 电源控制

    上传时间: 2022-04-03

    上传用户:bluedrops