虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

One-Chip

  • 基于单片机和基站器件EM4095的手持式低频RFID读卡器

    介绍一种采用单片机技术和基站器件EM4095的手持式低频RFID读卡器方案。首先对整个系统框架进行说明,然后介绍主要功能模块的设计,给出了各模块的原理图。重点描述了基站器件EM4095的性能参数和功能原理,最后描述了该系统的主程序流程图。 Abstract:  In this paper,a handheld RFID reader based on MCU and EM4095 is introduced.At first,the configuration of this system is explained.Then the design of main modules and schematic documents are particularly presented.The parameters and principle of the chip EM4095 are introduced in detail. At last,the main software flow is given

    标签: 4095 RFID EM 单片机

    上传时间: 2013-10-18

    上传用户:windypsm

  • 基于MS5534B的微功耗气压数据采集

    气压是气象监测中的一个重要参数,提出了一种气压数据采集模块设计方案,该模块采用数字气压传感器MS5534B、MSP430单片机MSP430F2272和带实时时钟(RTC)64 KB铁电存储器。通过低功耗软件设计方法以微安级整体平均功耗实现了气压数据的采集和存储,适合电池供电的连续高精度气压采集应用。给出了模块的软硬件设计以及MS5534B的性能指标和使用经验。 Abstract:  Air pressure is an important parameter in weather monitor.This paper futs forward a new design scheme of low power-air pressure data acquisition module.The module uses a digital output barometer sensor MS5534B,MSP430 microcontroller MSP430F2272 and integrated RTC 64KB FRAM,precision air pressure measurement and storage chip.Another point of this module is low power consumption, so it is well suited for battery powered air pressure data acquisition applications. At the same time,the software and hardware deign of module is presented,And the speciaties and use notices of MS5534B are given.

    标签: 5534B 5534 MS 微功耗

    上传时间: 2014-12-27

    上传用户:drink!

  • 基于8051F330的音频信号发生器的设计

     MMC/SD卡以其优越的性能,在单片机嵌入式设备中得到广泛应用。将MMC/SD卡作为外部掉电存储介质应用于音频信号发生器中,通过8051F330单片机上的SPI接口,实现单片机—MMC/SD卡的存储扩展,设计了此硬件平台上的MMC/SD卡的单片机驱动程序,并给出了相应的程序代码,满足音频信号发生器的大容量存储要求。 Abstract:  MMC/SD card is more and more widely used in the single chip embedded devices for their excellent performances.This article introduces the application of MMC/SD card as the external power down storage medium in audio signal generator. The extension technology especially for storage of single chip-MMC/SD card via SPI interfaces in 8051F330 single chip, including designs single chip drive program of MMC/SD card based on hardware platform,and also gives the key coding of the program. The implementation of big capacity storage is meaningful in audio signal generator.

    标签: 8051F330 音频信号 发生器

    上传时间: 2014-12-27

    上传用户:黄华强

  • 基于C8051F340的数据采集器设计

    针对众多低成本数据采集需求,采用带有片上USB控制器和D/A转换器的混合信号微处理器C8051F340,设计了一款可通过USB接口和LabVIEW图形用户界面实现与PC机联机的数据采集器,同时借助系统的SD卡存储独立实现现场长时间采集数据。该数据采集器成本低,结构简单,体积小,已成功用于工业现场。 Abstract:  Aiming at the need of low cost data acquisition, a data acquisition device is designed based on C8051F340 which is a mixed-signal microcontroller and integrates USB controller and A/D controller on a chip.The data acquisition device which can combine with PC by USB interface and LabVIEW graphical user interface,can realize data acquisition. At the same time,it can be solely run a long time in virtue of SD card in field.The date aequisition device features low cost,simple structure and little sharp, and it has been used in industry field.

    标签: C8051F340 数据 集器设计

    上传时间: 2014-05-31

    上传用户:1109003457

  • 基于W77E58的跑步机联网系统的开发

    对于传统的跑步机无法联机组网,保存历史数据,实时调试等问题,介绍了一个由多台跑步机通过RS-232串行总线与上位机相连组成的跑步机联网系统。系统采用W77E58作为下位机核心控制器件,它具有双串行通讯端口,其中一个串口用于与变频器通讯,另一个串口则与上位机相连,构成跑步机网络。 Abstract:  The traditional running machine can not be connected to a network, saving historical data, real time debug etc.In this paper,a new network system which is composed of running machines connected by a RS-232 communication bus is introduced.In the system,W77E58 is used as a core control unit.W77E58 has two serial ports,one is connected to the inverter and the other is connected to the PC. Thus a network appears.

    标签: W77E58 跑步机 联网系统

    上传时间: 2014-12-27

    上传用户:哇哇哇哇哇

  • 基于DAC7512的数控直流恒流源设计

    为了解决磁放大器性能测试过程中,需要对其供给不同数值恒定电流的问题,设计了一种基于DAC7512和单片机的数控恒流源系统。该系统采用AT89C51作为主控器件,将计算机发送的电流控制字命令转换为D/A转换器控制字,通过模拟SPI通信接口,写D/A控制字到DAC7512,从而控制其输出相应数字电压值,经差动缩放电路、电压/电路变换电路和功率驱动电路,最后输出恒定电流。实验结果表明,恒流源输出电流调节范围为-45~+45 mA、精度为±0.1 mA,分辨率达0.024 4 mA,具有应用灵活,外围电路简单,可靠性高的特点。该数控直流恒流源也可为相关产品的测试系统研发提供参考。 Abstract:  In order to solve the need to supply different values constant current for the magnetic amplifier in testing process, numerical control constant current source system was designed based on DAC7512 chip and microcontroller technology. The system used the AT89C51 as the main chip, which can convert the current control word from computer into to D/A control words. And the system wrote D/A control word into the DAC7512 chip to control the output voltage value by the SPI communication interface, which can output corresponding constant current figures by scaling circuit, the V/I converter and power drive circuit. Experimental results show that the current source output current adjustment range is -45~+45mA, accuracy is ± 0.1mA, and resolution ratio is 0.024 4mA

    标签: 7512 DAC 数控直流 恒流源

    上传时间: 2014-12-27

    上传用户:invtnewer

  • C8051F320列车安全巡检仪的设计

    提出了一种基于C8051F320的列车安全巡检仪的设计方案,详细阐述了巡检仪的各个模块的硬、软件设计。巡检仪集信息采集、轴温检测、照明和记录存储等功能于一体,实现了对列车安全巡检工作有效的监督和科学管理。系统软件采用C51编写,对单片机进行有效的电源管理,保证了巡检仪的稳定性、可靠性和低功耗性。 Abstract:  This paper puts forward a design of train safety inspection based on C8051F320,describes all modules hardware and software design of inspection instrument.The inspection instrument has the function of information collection, axle’s temperature detection, lighting and records storage.It can supervise and administer train safety inspection work effectively.The system software using C51 can manage the power of single chip microcomputer, and guarantee the stability, reliability and low power consumption of the inspection instrument.

    标签: C8051F320 列车 仪的设计 巡检

    上传时间: 2013-12-22

    上传用户:落花无痕

  • 基于AVR单片机的USB接口设计

    以AVR单片机ATmega8和USB接口器件PDIUSBD12为核心,基于标准的USB1.1协议,设计一种通用USB接口模块,以满足嵌入式系统中对USB接口的需求。对模块的硬件电路或单片机固件程序的硬件接口层稍加修改即可用于其他各种微处理器。该模块可为各种嵌入式系统增加USB接口,实现与USB主机系统通信。 Abstract:  Based on AVR microcontroller ATmega8 and USB interface chip PDIUSBD12, a general USB interface module is designed according to USB1.1 protocol for various requirements of embedded systems. Only with few modifications in circuit or hardware abstract layer of firmware, the module can be used on many types of microprocessors. All kinds of embedded systems can realize high speed and stable communication with USB host systems, owing to the facility of this module.

    标签: AVR USB 单片机 接口设计

    上传时间: 2014-01-08

    上传用户:赵云兴

  • LS7266R1在电子式万能材料试验机中的应用

    针对材料试验机等设备中要求测量或控制材料拉伸或压缩的位移,一般采用光电轴角编码器检测位置信号,输出正交编码脉冲信号。若采用其他方法检测位置信号,必然导致电路设计复杂,可靠性降低。因此,提出一种基于LS7266R1的电子式万能材料试验机设计方案。给出了试验机中的控制器工作原理,LS7266R1与单片机的接口硬件设计,以及主程序软件流程图。巧妙地把力量传感器,位移传感器等机械运动状态的压力或拉力以及位置坐标,变成了电压信号和电脉冲数字信号,供A/D测量和LS7266R1计数,从而实现了独立完成材料试验控制或通过PC机串口命令完成材料试验控制。 Abstract:  Aiming at the requirement that the displacement of the tension and compression always be tested and controlled in the equipement such as material testing machine. The position signal was tested by photoelectric axial angle coder. Therefore, the paper proposes the design of electronic universal testing machine design based on LS7266R1. If the position signal detected by other methods, will inevitably lead to the circuit design complexity, reliability decreased. The work theory of the controller, the hardware interface design between LS7266R1 and single chip, and the flow chart of main program, are presented in this paper. The signal of the compression or tension power and displacement at working, which tested by power sensor and displacement sensor especially, is changed into electric voltage and electric pulse numerical signals. And these signals can be tested by A/D and counted by LS7266R1. Finally the test of the material properties can be controlled by itself, or controlled by the COM command of PC.

    标签: 7266R 7266 LS R1

    上传时间: 2013-11-02

    上传用户:yl1140vista

  • 基于MC33993的多路开关检测接口电路设计

    主要介绍了以PIC18F2480单片机为处理器,基于可编程多路开关检测接口器件MC33993实现的车用多路开关检测接口电路的设计。该设计克服了以往基于分立元件的检测接口电路的弊端,简化了接口电路设计,保证了车用开关工作的可靠性和安全性。 Abstract:  The design of automotive multiple switch detection interface circuit based on MC33993 is introduced mainly which adopts PIC18F2480 single chip microprocessor.This circuit overcomes shortage of traditional design which contains many schism elements, and the application of MC33993 also predigests the whole design of interface circuit and guarantees the dependability and security of the switch.

    标签: 33993 MC 多路开关 检测

    上传时间: 2013-11-19

    上传用户:star_in_rain