PICmicro中档单片机系列参考手册:请注意以下有关Microchip 器件代码保护功能的要点：• Microchip的产品均达到Microchip 数据手册中所述的技术指标。• Microchip确信：在正常使用的情况下， Microchip 系列产品是当今市场上同类产品中最安全的产品之一。• 目前，仍存在着恶意、甚至是非法破坏代码保护功能的行为。就我们所知，所有这些行为都不是以Microchip 数据手册中规定的操作规范来使用Microchip 产品的。这样做的人极可能侵犯了知识产权。• Microchip愿与那些注重代码完整性的客户合作。• Microchip或任何其它半导体厂商均无法保证其代码的安全性。代码保护并不意味着我们保证产品是“牢不可破”的。代码保护功能处于持续发展中。Microchip 承诺将不断改进产品的代码保护功能。任何试图破坏Microchip 代码保护功能的行为均可视为违反了《数字器件千年版权法案（Digital Millennium Copyright Act）》。如果这种行为导致他人在未经授权的情况下，能访问您的软件或其它受版权保护的成果，您有权依据该法案提起诉讼，从而制止这种行为的。 Microchip 公司是The Embedded Control Solutions Company® （嵌入式控制系统解决方案公司），其产品主要满足嵌入式控制市场的需求。我们是以下产品的领先供应商：• 8 位通用单片机(PICmicro® 单片机)• 专用和标准的非易失性存储器件• 安防器件 (KEELOQ®)• 专用标准产品欲获得您所感兴趣的产品列表，请申请一份Microchip 产品线目录。以往，8 位单片机的用户只选择传统的MCU 类型，即ROM 器件，用于生产。Microchip 率先改变了这种传统观念，向人们展示了OTP （一次性编程）器件比ROM 器件在其寿命周期内具有更低的产品成本。Microchip 具备EPROM技术优势，从而使EPROM成为PICmicro 单片机程序存储器的不二选择。Microchip 尽可能地缩小了EPROM 和ROM 存储器技术之间的成本差距，并使顾客从中受益。其他MCU 供应商无法作到这一点，这从他们的 EPROM 和 ROM 版本之间的价格差异便可以看出。Microchip 的8 位单片机市场份额的增长证明了PICmicro® 单片机能够满足大多数人的需要。这也使PICmicro 单片机架构成为了当今通用市场上应用最广泛的三大体系之一。Microchip 的低成本OTP 解决方案所带来的效益是这一增长的助推剂。用户能够从以下各方面受益：• 快速的产品上市时间• 允许生产过程中对产品进行代码修改• 无需掩膜产品所需的一次性工程费用(NRE)• 能够轻松为产品进行连续编号• 无需额外增加硬件即可存储校准数据• 可最大限度地增加PICmicro® 单片机的库存• 由于在开发和生产中使用同一器件，从而降低了风险Microchip 的8 位 PICmicro 单片机具备很好的性价比，可成为任何传统的8 位应用和某些4 位应用( 低档系列)、专用逻辑的替代品以及低端DSP 应用( 高档系列) 的选择。这些特点及其良好的性价比使PICmicro 单片机在大多数应用场合极具吸引力。
上传时间： 2014-03-03
上传用户：ainimao
The Controller Area Network (CAN) is a serial, asynchronous, multi-master communication protocol forconnecting electronic control modules, sensors and actuators in automotive and industrial applications.With the SJA1000, Philips Semiconductors provides a stand-alone CAN controller which is more than a simpleeplacement of the PCA82C200.Attractive features are implemented for a wide range of applications, supporting system optimization, diagnosisand maintenance.
标签： Stand-alone contro 1000 SJA
上传时间： 2013-11-18
上传用户：yxgi5
The PCA82C250 and PCA82C251 are advanced transceiver products for use in automotive and general industrialapplications with transfer rates up to 1 Mbit/s. They support the differential bus signal representation beingdescribed in the international standard for in-vehicle CAN high-speed applications (ISO 11898). Controller AreaNetwork (CAN) is a serial bus protocol being primarily intended for transmission of control related data between anumber of bus nodes.
上传时间： 2013-11-24
上传用户：Alick
The PCA9540B is a 1-of-2 bidirectional translating multiplexer, controlled via the I2C-bus.The SCL/SDA upstream pair fans out to two SCx/SDx downstream pairs, or channels.Only one SCx/SDx channel is selected at a time, determined by the contents of theprogrammable control register.
上传时间： 2014-12-28
上传用户：nshark
The PCA9541 is a 2-to-1 I2C-bus master selector designed for high reliability dual masterI2C-bus applications where system operation is required, even when one master fails orthe controller card is removed for maintenance. The two masters (for example, primaryand back-up) are located on separate I2C-buses that connect to the same downstreamI2C-bus slave devices. I2C-bus commands are sent by either I2C-bus master and are usedto select one master at a time. Either master at any time can gain control of the slavedevices if the other master is disabled or removed from the system. The failed master isisolated from the system and will not affect communication between the on-line masterand the slave devices on the downstream I2C-bus.
上传时间： 2013-10-09
上传用户：3294322651
The PCA9544A provides 4 interrupt inputs, one for each channeland one open drain interrupt output. When an interrupt is generated byany device, it will be detected by the PCA9544A and the interruptoutput will be driven LOW. The channel need not be active fordetection of the interrupt. A bit is also set in the control byte.Bits 4 – 7 of the control byte correspond to channels 0 – 3 of thePCA9544A, respectively. Therefore, if an interrupt is generated byany device connected to channel 2, the state of the interrupt inputs isloaded into the control register when a read is accomplished.Likewise, an interrupt on any device connected to channel 0 wouldcause bit 4 of the control register to be set on the read. The mastercan then address the PCA9544A and read the contents of thecontrol byte to determine which channel contains the devicegenerating the interrupt. The master can then reconfigure thePCA9544A to select this channel, and locate the device generatingthe interrupt and clear it. The interrupt clears when the deviceoriginating the interrupt clears.
标签： 4channel multiple 9544A 9544
上传时间： 2014-12-28
上传用户：潜水的三贡
The PCA9542A is a 1-of-2 bidirectional translating multiplexer, controlled via the I2C-bus.The SCL/SDA upstream pair fans out to two SCx/SDx downstream pairs, or channels.Only one SCx/SDx channel is selected at a time, determined by the contents of theprogrammable control register. Two interrupt inputs, INT0 and INT1, one for each of theSCx/SDx downstream pairs, are provided. One interrupt output, INT, which acts as anAND of the two interrupt inputs, is provided.
上传时间： 2013-12-07
上传用户：europa_lin
The PCA9549 provides eight bits of high speed TTL-compatible bus switching controlledby the I2C-bus. The low ON-state resistance of the switch allows connections to be madewith minimal propagation delay. Any individual A to B channel or combination of channelscan be selected via the I2C-bus, determined by the contents of the programmable Controlregister. When the I2C-bus bit is HIGH (logic 1), the switch is on and data can flow fromPort A to Port B, or vice versa. When the I2C-bus bit is LOW (logic 0), the switch is open,creating a high-impedance state between the two ports, which stops the data flow.An active LOW reset input (RESET) allows the PCA9549 to recover from a situationwhere the I2C-bus is stuck in a LOW state. Pulling the RESET pin LOW resets the I2C-busstate machine and causes all the bits to be open, as does the internal power-on resetfunction.
上传时间： 2014-11-22
上传用户：xcy122677
The PCA9546A is a quad bidirectional translating switch controlled via the I2C-bus. TheSCL/SDA upstream pair fans out to four downstream pairs, or channels. Any individualSCx/SDx channel or combination of channels can be selected, determined by thecontents of the programmable control register.
上传时间： 2013-11-16
上传用户：cc1915
The PCA9547 is an octal bidirectional translating multiplexer controlled by the I2C-bus.The SCL/SDA upstream pair fans out to eight downstream pairs, or channels. Only oneSCx/SDx channel can be selected at a time, determined by the contents of theprogrammable control register. The device powers up with Channel 0 connected, allowingimmediate communication between the master and downstream devices on that channel.
上传时间： 2014-12-28
上传用户：270189020
