prev_cmp_uart_txd.fit.qmsg

基于verilog hdl的UART串口发送子程序。

{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "13 unused 3.3V 10 3 0 " "Info: Number of I/O pins in group: 13 (unused VREF, 3.3V VCCIO, 10 input, 3 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "3.3-V LVTTL. " "Info: I/O standards used: 3.3-V LVTTL." {  } {  } 0 0 "I/O standards used: %1!s!" 0 0 "" 0 -1}  } {  } 0 0 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0 "" 0 -1}  } {  } 0 0 "Statistics of %1!s!" 0 0 "" 0 -1}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use undetermined 2 17 " "Info: I/O bank number 1 does not use VREF pins and has undetermined VCCIO pins. 2 total pin(s) used --  17 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0 -1} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use undetermined 0 23 " "Info: I/O bank number 2 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  23 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0 -1} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use undetermined 1 22 " "Info: I/O bank number 3 does not use VREF pins and has undetermined VCCIO pins. 1 total pin(s) used --  22 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0 -1} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use undetermined 0 24 " "Info: I/O bank number 4 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  24 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0 -1}  } {  } 0 0 "Statistics of %1!s!" 0 0 "" 0 -1}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0 "" 0 -1}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:01 " "Info: Fitter preparation operations ending: elapsed time is 00:00:01" {  } {  } 0 0 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Info: Average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X14_Y0 X28_Y14 " "Info: Peak interconnect usage is 0% of the available device resources in the region that extends from location X14_Y0 to location X28_Y14" {  } {  } 0 0 "Peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "" 0 -1}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0 -1} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0 -1}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0 -1}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0 "" 0 -1}
{ "Warning" "WDAT_NO_LOADING_SPECIFIED_ONE_OR_MORE_PINS" "3 " "Warning: Found 3 output pins without output pin load capacitance assignment" { { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "clk_out 0 " "Info: Pin \"clk_out\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 -1} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "TXD 0 " "Info: Pin \"TXD\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 -1} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "TI 0 " "Info: Pin \"TI\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 -1}  } {  } 0 0 "Found %1!d! output pins without output pin load capacitance assignment" 0 0 "" 0 -1}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0 "" 0 -1}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "3 " "Warning: Following 3 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "clk_out GND " "Info: Pin clk_out has GND driving its datain port" {  } { { "d:/altera/90/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/90/quartus/bin/pin_planner.ppl" { clk_out } } } { "uart_txd.v" "" { Text "F:/My   Project/Verilog HDL/UART/uart_txd/uart_txd.v" 20 -1 0 } } { "d:/altera/90/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/90/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk_out } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 -1} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "TXD GND " "Info: Pin TXD has GND driving its datain port" {  } { { "d:/altera/90/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/90/quartus/bin/pin_planner.ppl" { TXD } } } { "uart_txd.v" "" { Text "F:/My   Project/Verilog HDL/UART/uart_txd/uart_txd.v" 21 -1 0 } } { "d:/altera/90/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/90/quartus/bin/TimingClosureFloorplan.fld" "" "" { TXD } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 -1} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "TI GND " "Info: Pin TI has GND driving its datain port" {  } { { "d:/altera/90/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/90/quartus/bin/pin_planner.ppl" { TI } } } { "uart_txd.v" "" { Text "F:/My   Project/Verilog HDL/UART/uart_txd/uart_txd.v" 22 -1 0 } } { "d:/altera/90/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/90/quartus/bin/TimingClosureFloorplan.fld" "" "" { TI } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 -1}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0 "" 0 -1}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "" 0 -1}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "F:/My   Project/Verilog HDL/UART/uart_txd/uart_txd.fit.smsg " "Info: Generated suppressed messages file F:/My   Project/Verilog HDL/UART/uart_txd/uart_txd.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0 -1}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 4 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 4 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "197 " "Info: Peak virtual memory: 197 megabytes" {  } {  } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "" 0 -1} { "Info" "IQEXE_END_BANNER_TIME" "Mon May 11 14:35:01 2009 " "Info: Processing ended: Mon May 11 14:35:01 2009" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0 -1} { "Info" "IQEXE_ELAPSED_TIME" "00:00:11 " "Info: Elapsed time: 00:00:11" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0 -1} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:04 " "Info: Total CPU time (on all processors): 00:00:04" {  } {  } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "" 0 -1}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0 -1}