tb_sdrm.tf

SDRAM控制器的源代码打包下载

/******************************************************************************
*
*    File Name:  tb_sdrm.v
*      Version:  1.11
*         Date:  June 2, 1999
*  Description:  functional testbench for SDRAM controller
* Dependencies:  mt48lc2m8a1-8, sdrm
*
*      Company:  Xilinx
*
*
*   Disclaimer:  THESE DESIGNS ARE PROVIDED "AS IS" WITH NO WARRANTY 
*                WHATSOEVER AND MICRON SPECIFICALLY DISCLAIMS ANY 
*                IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR
*                A PARTICULAR PURPOSE, OR AGAINST INFRINGEMENT.
*
*                Copyright (c) 1998 Xilinx, Inc.
*                All rights reserved
*
******************************************************************************/
`timescale 1ns / 100ps
`include "micron/mt48lc1m16a1-8a.v"
`include "define.v"
module f_sdrm;
   
   reg [31 : 0] ad;              // Address /Data bus
   reg 		data_addr_n;      	// ADS#
   reg 		we_rn;            	// WE/R#
   reg 		clk;              	// Clock
   reg 		reset;            	// Reset
   wire 	cke;              		// CKE
   wire 	cs1, cs2;         		// CS
   wire [3:0] 	dqm;              // DQM
   
   wire [10:0] 	addr;
   wire [31 : 0] AD = ad;        // Address /Data bus
   wire [31 : 0] DQ;             // SDRAM Data bus
   wire 	 Reset = reset;
   wire 	 clk_con;
   
   parameter 	 hi_z = 32'bz;    // Hi-Z
   
   sdrm sdrmc (.Reset(reset), 
	       .Clkp(clk), 
	       .data_addr_n(data_addr_n), 
	       .we_rn(we_rn), 
	       .AD(AD), 
	       .Clk_FBp(clk_con), 
	       .Clk_SDp(clk_con), 
	       .sd_ras(ras_n), 
	       .sd_cas(cas_n), 
	       .sd_we(we_n), 
	       .sd_data(DQ[31:0]), 
	       .sd_add(addr), 
	       .sd_cke(cke), 
	       .sd_dqm(dqm), 
	       .sd_cs1(cs1), 
	       .sd_cs2(cs2), 
	       .sd_ba(ba));
   
   
   mt48lc1m16a1 sdram0 (.Addr(addr), 
			.We_n(we_n), 
			.Cas_n(cas_n), 
			.Ras_n(ras_n),
			.Clk(clk_con), 
			.Cke(cke), 
			.Cs_n(cs1), 
			.Dqm(dqm[1:0]), 
			.Ba(ba),
         .Dq(DQ[15:0]));
   
   mt48lc1m16a1 sdram1 (.Addr(addr), 
			.We_n(we_n), 
			.Cas_n(cas_n), 
			.Ras_n(ras_n),
			.Clk(clk_con), 
			.Cke(cke), 
			.Cs_n(cs2), 
			.Dqm(dqm[3:2]), 
			.Ba(ba),
         .Dq(DQ[31:16]));
   

   initial begin
      we_rn  = 1;
      data_addr_n  = 1;
      reset  = 1;
      ad  = hi_z;
      #50 reset = 0;
   end

   initial begin
     clk = 1;
     #5;
     clk = 0;
     #15;
     forever # (`CYCLE) clk = ~clk;
   end
    
   
   task addr_wr;
      input [31 : 0] address;
      begin
	 data_addr_n   = 0;
	 we_rn = 1;
	 ad  = address;
      end
   endtask
   
   task data_wr;
      input [31 : 0] data_in;
      begin
	 data_addr_n   = 1;
	 we_rn = 1;
	 ad  = data_in;
      end
   endtask
   
   task addr_rd;
      input [31 : 0] address;
      begin
	 data_addr_n   = 0;
	 we_rn = 0;
	 ad  = address;
      end
   endtask
   
   task data_rd;
      input [31 : 0] data_in;
      begin
	 data_addr_n   = 1;
	 we_rn = 0;
	 ad  = data_in;
      end
   endtask
   
   task nop;
      begin
	 data_addr_n   = 1;
	 we_rn = 0;
	 ad  = hi_z;
      end
   endtask
   
   
   initial begin
      //$vcdpluson;  //generate waveform file for virsim
      $monitor($time,, "%b", clk, ras_n, cas_n, we_n, ba, addr, DQ );
      begin	
	 force f_sdrm.sdrmc.sdrm_t.sdrm_st.state = 13'b0000000000001;
	 #(`CYCLE);
	 release f_sdrm.sdrmc.sdrm_t.sdrm_st.state;
	
	 nop ;                                       // Nop
	 #( 86* `CYCLE +1); addr_wr (32'h20340400);  // Precharge, load Controller MR
	 #(`CYCLE); data_wr (32'h0704a076);      // value for Controller MR
	 #(`CYCLE); nop ;                            // Nop
         #(5 * `CYCLE); addr_wr (32'h38000000);      // Auto Refresh
         #(`CYCLE); data_wr (32'h00000000);      //
         #(`CYCLE); nop ;                            // Nop
         #(15 * `CYCLE); addr_wr (32'h38000000);     // Auto Refresh
         #(`CYCLE); data_wr (32'h00000000);      //
         #(13 * `CYCLE); nop ;                       // Nop
         #( 7 * `CYCLE); addr_wr (32'h1000cc00);     // Load Mode Reg
         #(`CYCLE); data_wr (32'h00000000);      //
         #(`CYCLE); nop ;                            // Nop
         #(3 * `CYCLE); addr_wr (32'h00000000);      // Write command, row addres
         #(`CYCLE); data_wr (32'h00001001);      // first data
         #(`CYCLE); data_wr (32'h00001002);          // second data
         #(`CYCLE); data_wr (32'h00001003);          //	third data
         #(`CYCLE); data_wr (32'h00001004);          //	fourth data
         #(`CYCLE); data_wr (32'h00001005);          //	fifth data
         #(`CYCLE); data_wr (32'h00001006);          //	sixth data
         #(`CYCLE); data_wr (32'h00001007);          //	seventh data
         #(`CYCLE); data_wr (32'h00001008);          // eighth data
         #(`CYCLE); nop ;                            // Nop
         #(5 * `CYCLE); addr_wr (32'h00680000);      // Write command, row address 
         #(`CYCLE); data_wr (32'h000010f1);      // first data 
         #(`CYCLE); data_wr (32'h000010f2);          // second data
         #(`CYCLE); data_wr (32'h000010f3);          // third data
         #(`CYCLE); data_wr (32'h000010f4);          // fourth data
         #(`CYCLE); data_wr (32'h000010f5);          // fifth data
         #(`CYCLE); data_wr (32'h000010f6);          // sixth data
         #(`CYCLE); data_wr (32'h000010f7);          // seventh data
         #(`CYCLE); data_wr (32'h000010f8);          // eighth data
         #(`CYCLE); nop ;                            // Nop
         #(30 * `CYCLE); addr_rd (32'h00000000);     // Read command, row address
         #(`CYCLE); data_rd (hi_z);              // first data
         #(`CYCLE); data_rd (hi_z);                  // second data
         #(`CYCLE); data_rd (hi_z);                  // third data
         #(`CYCLE); data_rd (hi_z);                  // fourth data
         #(`CYCLE); data_rd (hi_z);                  // fifth data
         #(`CYCLE); data_rd (hi_z);                  // sixth data
         #(`CYCLE); data_rd (hi_z);                  // seventh data
         #(`CYCLE); data_rd (hi_z);                  // eighth data
         #(`CYCLE); nop ;                            // Nop
         #(20 * `CYCLE); addr_rd (32'h00680000);     // Read command, row address 
         #(`CYCLE); data_rd (hi_z);              // first data
         #(`CYCLE); data_rd (hi_z);                  // second data
         #(`CYCLE); data_rd (hi_z);                  // third data
         #(`CYCLE); data_rd (hi_z);                  // fouth data
         #(`CYCLE); data_rd (hi_z);                  // fifth data
         #(`CYCLE); data_rd (hi_z);                  // sixth data
         #(`CYCLE); data_rd (hi_z);                  // seventh data
	 #(`CYCLE); data_rd (hi_z);                  // eighth data
         #(`CYCLE); nop ;                            // Nop
         #(13 * `CYCLE); addr_wr (32'h20340400);     // Load CTRL:
         #(`CYCLE); data_wr (32'h0704a006);      //
         #(`CYCLE); nop ;                            // Nop
         #( 7 * `CYCLE); addr_wr (32'h1000c000);     // Load Mode Reg, burst length=1
         #(`CYCLE); data_wr (32'h00000000);      //
         #(`CYCLE); nop ;                            // Nop
         #(20 * `CYCLE); addr_rd (32'h00680000);     // Read, row address
         #(`CYCLE); data_rd (hi_z);              // first data
         #(`CYCLE); nop ;                            // Nop
         #(`CYCLE); nop ;                            // Nop
         #(20 * `CYCLE); addr_rd (32'h00000000);     // Read, row address
         #(`CYCLE); data_rd (hi_z);              // first data
         #(`CYCLE); nop ;                            // Nop
         #(`CYCLE); nop ;                            // Nop
         #(300 * `CYCLE);
      end
      $stop;
   end
`include "string_decode_fn.v"
endmodule


/*********************************************************************************************
* Note: The File->Save Project As.. operation of Project Navigator does not copy 
*           files included with the `include statement.  If this example is saved to
*           a new location, the user should copy all "included" files manually.
*********************************************************************************************/