seltime_dc.fit

个人设计的基于VHDL的数字电子日历 在MAX+PLUSH软件平台上编译、仿真

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 04/14/2005 22:32:00      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "seltime_dc"
BEGIN

    DEVICE = "EPM7064SLC44-5";

    "clk"                          : INPUT_PIN  = 43     ;
    "hour0"                        : INPUT_PIN  = 31     ; -- LC46
    "hour1"                        : INPUT_PIN  = 37     ; -- LC53
    "hour2"                        : INPUT_PIN  = 33     ; -- LC49
    "hour3"                        : INPUT_PIN  = 39     ; -- LC57
    "hour4"                        : INPUT_PIN  = 12     ; -- LC1
    "hour5"                        : INPUT_PIN  = 29     ; -- LC41
    "min0"                         : INPUT_PIN  = 2      ;
    "min1"                         : INPUT_PIN  = 40     ; -- LC62
    "min2"                         : INPUT_PIN  = 14     ; -- LC30
    "min3"                         : INPUT_PIN  = 41     ; -- LC64
    "min4"                         : INPUT_PIN  = 8      ; -- LC5
    "min5"                         : INPUT_PIN  = 44     ;
    "min6"                         : INPUT_PIN  = 11     ; -- LC3
    "reset"                        : INPUT_PIN  = 1      ;
    "sec0"                         : INPUT_PIN  = 20     ; -- LC19
    "sec1"                         : INPUT_PIN  = 36     ; -- LC52
    "sec2"                         : INPUT_PIN  = 9      ; -- LC4
    "sec3"                         : INPUT_PIN  = 34     ; -- LC51
    "sec4"                         : INPUT_PIN  = 6      ; -- LC11
    "sec5"                         : INPUT_PIN  = 5      ; -- LC14
    "sec6"                         : INPUT_PIN  = 4      ; -- LC16
    "sel0"                         : OUTPUT_PIN = 26     ; -- LC36
    "sel1"                         : OUTPUT_PIN = 28     ; -- LC40
    "sel2"                         : OUTPUT_PIN = 27     ; -- LC37
    "s0"                           : OUTPUT_PIN = 17     ; -- LC24
    "s1"                           : OUTPUT_PIN = 24     ; -- LC33
    "s2"                           : OUTPUT_PIN = 25     ; -- LC35
    "s3"                           : OUTPUT_PIN = 16     ; -- LC25
    "s4"                           : OUTPUT_PIN = 18     ; -- LC21
    "s5"                           : OUTPUT_PIN = 19     ; -- LC20
    "s6"                           : OUTPUT_PIN = 21     ; -- LC17
    "~760~1"                       : LOCATION   = LC39   ;
    "~760~2"                       : LOCATION   = LC50   ;
    "~772~1"                       : LOCATION   = LC44   ;
    "~772~2"                       : LOCATION   = LC49   ; -- PIN 33
    "~772~3"                       : LOCATION   = LC34   ;
    "~775~1"                       : LOCATION   = LC14   ; -- PIN 5
    "~775~2"                       : LOCATION   = LC56   ; -- PIN 38
    "~775~3"                       : LOCATION   = LC60   ;
    "~775~4"                       : LOCATION   = LC43   ;
    "~775~5"                       : LOCATION   = LC48   ; -- PIN 32
    "~784~1"                       : LOCATION   = LC38   ;
    "~784~2"                       : LOCATION   = LC51   ; -- PIN 34
    "~791~1"                       : LOCATION   = LC54   ;
    "~793~1"                       : LOCATION   = LC12   ;
    "~795~1"                       : LOCATION   = LC53   ; -- PIN 37
    "~796~1"                       : LOCATION   = LC19   ; -- PIN 20
    "~797~1"                       : LOCATION   = LC27   ;
    "~832~1"                       : LOCATION   = LC57   ; -- PIN 39
    "~832~2"                       : LOCATION   = LC59   ;
    "~865~1"                       : LOCATION   = LC55   ;
    "~865~2"                       : LOCATION   = LC41   ; -- PIN 29
    "~898~1"                       : LOCATION   = LC58   ;
    "~898~2"                       : LOCATION   = LC42   ;
    "~898~3"                       : LOCATION   = LC61   ;
    "~931~1"                       : LOCATION   = LC62   ; -- PIN 40
    "~964~1"                       : LOCATION   = LC63   ;
    "~964~2"                       : LOCATION   = LC64   ; -- PIN 41
    "~997~1"                       : LOCATION   = LC52   ; -- PIN 36
    "~997~2"                       : LOCATION   = LC46   ; -- PIN 31
    "~997~3"                       : LOCATION   = LC47   ;

END;

INTERNAL_INFO "seltime_dc"
BEGIN
	DEVICE = EPM7064SLC44-5;
	LC17    : LORAX = "G54R0";
	LC20    : LORAX = "G57R0";
	LC21    : LORAX = "G21R0";
	LC25    : LORAX = "G103R0";
	LC35    : LORAX = "G60R0";
	LC33    : LORAX = "G58R0";
	LC24    : LORAX = "G24R0";
	LC37    : LORAX = "G25R0,PA2R0C2,PA4R0C3,PA4R0C1,PA2R0C0";
	LC40    : LORAX = "G28R0,PA0R0C0,PA5R0C2,PA0R0C3,PA0R0C1";
	LC36    : LORAX = "G61R0,PA9R0C0,PA9R0C2,PA9R0C3,PA9R0C1";
	LC54    : LORAX = "G63R0,PA15R0C1";
	OH63R0P41 : LORAX = "G48R0,PA10R0C3";
	OH56R0P39 : LORAX = "G12R0,PA8R0C3,PA4R0C2";
	OH50R0P34 : LORAX = "G97R0,PA22R0C2,PA22R0C3";
	LC12    : LORAX = "G69R0,PA25R0C1";
	OH3R0P9 : LORAX = "G86R0,PA26R0C2,PA26R0C3,PA26R0C0";
	OH2R0P11 : LORAX = "G85R0,PA21R0C3,PA21R0C0,PA21R0C2";
	OH15R0P4 : LORAX = "G36R0,PA14R0C0,PA14R0C3,PA17R0C2";
	OH29R0P14 : LORAX = "G5R0,PA2R0C3,PA3R0C0";
	OH48R0P33 : LORAX = "G95R0,PA23R0C3,PA23R0C2,PA23R0C0";
	LC53    : LORAX = "G62R0,PA17R0C1";
	OH65R0P44 : LORAX = "G82R0,PA24R0C2,PA24R0C3";
	OH52R0P37 : LORAX = "G128R0,PA35R0C2,PA35R0C3";
	OH51R0P36 : LORAX = "G98R0,PA18R0C2,PA18R0C3";
	OH40R0P29 : LORAX = "G41R0,PA15R0C3,PA15R0C2,PA16R0C0";
	OH13R0P5 : LORAX = "G34R0,PA13R0C3,PA13R0C2,PA13R0C1";
	OH61R0P40 : LORAX = "G46R0,PA12R0C3";
	LC27    : LORAX = "G105R0,PA28R0C1";
	OH4R0P8 : LORAX = "G116R0,PA27R0C3,PA27R0C1,PA28R0C2";
	OH45R0P31 : LORAX = "G9R0,PA5R0C3,PA5R0C1";
	OH18R0P20 : LORAX = "G122R0,PA32R0C1,PA32R0C2,PA32R0C3";
	OH0R0P12 : LORAX = "G83R0,PA19R0C2,PA19R0C3,PA19R0C1,PA18R0C0";
	OH10R0P6 : LORAX = "G2R0,PA0R0C2,PA3R0C3,PA3R0C1";
	OH67R0P2 : LORAX = "G16R0,PA6R0C3,PA6R0C1";
	LC14    : LORAX = "G100R0,PA30R0C1";
	LC38    : LORAX = "G26R0,PA1R0C2,PA1R0C3,PA1R0C1";
	LC19    : LORAX = "G56R0,PA11R0C3,PA14R0C2,PA11R0C1";
	LC44    : LORAX = "G110R0,PA31R0C3,PA34R0C2";
	LC39    : LORAX = "G27R0,PA7R0C3,PA7R0C1,PA7R0C2";
	LC56    : LORAX = "G65R0,PA10R0C0";
	LC60    : LORAX = "G81R0,PA22R0C0";
	LC43    : LORAX = "G109R0,PA30R0C0";
	LC52    : LORAX = "G32R0,PA2R0C1";
	LC63    : LORAX = "G113R0,PA27R0C2";
	LC57    : LORAX = "G78R0,PA24R0C1";
	LC58    : LORAX = "G79R0,PA26R0C1";
	LC46    : LORAX = "G75R0,PA20R0C1";
	LC55    : LORAX = "G64R0,PA12R0C1";
	LC49    : LORAX = "G29R0,PA7R0C0,PA8R0C2";
	LC64    : LORAX = "G114R0,PA31R0C2";
	LC62    : LORAX = "G112R0,PA30R0C2";
	LC51    : LORAX = "G31R0,PA3R0C2";
	LC50    : LORAX = "G30R0,PA6R0C2";
	LC59    : LORAX = "G80R0,PA18R0C1";
	LC42    : LORAX = "G108R0,PA29R0C1";
	LC47    : LORAX = "G76R0,PA21R0C1";
	LC61    : LORAX = "G111R0,PA33R0C1";
	LC41    : LORAX = "G107R0,PA35R0C1";
	LC34    : LORAX = "G59R0,PA10R0C2,PA15R0C0";
	LC48    : LORAX = "G77R0,PA25R0C0";
END;