📄 pluse_delay.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 04/30/2006 08:43:04
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "pluse_delay"
BEGIN
DEVICE = "EP1K10TC100-1";
"clk" : INPUT_PIN = 39 ;
"square" : INPUT_PIN = 90 ;
"out_down" : OUTPUT_PIN = 16 ;
"out_up" : OUTPUT_PIN = 68 ;
"|LPM_ADD_SUB:232|addcore:adder|:167" : LOCATION = LC5_A2 ;
"|LPM_ADD_SUB:232|addcore:adder|:171" : LOCATION = LC7_A2 ;
"|LPM_ADD_SUB:232|addcore:adder|:175" : LOCATION = LC2_A2 ;
"|LPM_ADD_SUB:232|addcore:adder|:179" : LOCATION = LC5_A10;
"|LPM_ADD_SUB:232|addcore:adder|:183" : LOCATION = LC7_A10;
"|LPM_ADD_SUB:232|addcore:adder|:187" : LOCATION = LC2_A10;
"|LPM_ADD_SUB:232|addcore:adder|:191" : LOCATION = LC4_A3 ;
"|LPM_ADD_SUB:232|addcore:adder|:195" : LOCATION = LC2_A3 ;
"|LPM_ADD_SUB:232|addcore:adder|:199" : LOCATION = LC5_A8 ;
"|LPM_ADD_SUB:232|addcore:adder|:203" : LOCATION = LC7_A8 ;
"|LPM_ADD_SUB:232|addcore:adder|:207" : LOCATION = LC2_A8 ;
"|LPM_ADD_SUB:232|addcore:adder|:211" : LOCATION = LC3_A7 ;
"|LPM_ADD_SUB:232|addcore:adder|:215" : LOCATION = LC5_A7 ;
"|LPM_ADD_SUB:232|addcore:adder|:219" : LOCATION = LC7_A7 ;
"|LPM_ADD_SUB:232|addcore:adder|:223" : LOCATION = LC1_A7 ;
"|LPM_ADD_SUB:232|addcore:adder|:227" : LOCATION = LC3_A6 ;
"|LPM_ADD_SUB:232|addcore:adder|:231" : LOCATION = LC5_A6 ;
"|LPM_ADD_SUB:232|addcore:adder|:235" : LOCATION = LC7_A6 ;
"|LPM_ADD_SUB:232|addcore:adder|:239" : LOCATION = LC2_A6 ;
"|LPM_ADD_SUB:232|addcore:adder|:243" : LOCATION = LC8_A11;
"|LPM_ADD_SUB:232|addcore:adder|:247" : LOCATION = LC5_A1 ;
"|LPM_ADD_SUB:232|addcore:adder|:251" : LOCATION = LC7_A1 ;
"|LPM_ADD_SUB:232|addcore:adder|:255" : LOCATION = LC2_A1 ;
"|LPM_ADD_SUB:232|addcore:adder|:259" : LOCATION = LC1_A12;
"|LPM_ADD_SUB:232|addcore:adder|:263" : LOCATION = LC4_A12;
"|LPM_ADD_SUB:232|addcore:adder|:267" : LOCATION = LC6_A12;
"|LPM_ADD_SUB:232|addcore:adder|:271" : LOCATION = LC2_A12;
"|LPM_ADD_SUB:232|addcore:adder|:275" : LOCATION = LC3_A4 ;
"|LPM_ADD_SUB:232|addcore:adder|:279" : LOCATION = LC5_A4 ;
"|LPM_ADD_SUB:232|addcore:adder|:283" : LOCATION = LC7_A4 ;
"|LPM_ADD_SUB:863|addcore:adder|:167" : LOCATION = LC4_B15;
"|LPM_ADD_SUB:863|addcore:adder|:171" : LOCATION = LC7_B15;
"|LPM_ADD_SUB:863|addcore:adder|:175" : LOCATION = LC2_B15;
"|LPM_ADD_SUB:863|addcore:adder|:179" : LOCATION = LC4_B23;
"|LPM_ADD_SUB:863|addcore:adder|:183" : LOCATION = LC6_B23;
"|LPM_ADD_SUB:863|addcore:adder|:187" : LOCATION = LC1_B23;
"|LPM_ADD_SUB:863|addcore:adder|:191" : LOCATION = LC1_B22;
"|LPM_ADD_SUB:863|addcore:adder|:195" : LOCATION = LC2_B22;
"|LPM_ADD_SUB:863|addcore:adder|:199" : LOCATION = LC5_B20;
"|LPM_ADD_SUB:863|addcore:adder|:203" : LOCATION = LC7_B20;
"|LPM_ADD_SUB:863|addcore:adder|:207" : LOCATION = LC2_B20;
"|LPM_ADD_SUB:863|addcore:adder|:211" : LOCATION = LC2_B16;
"|LPM_ADD_SUB:863|addcore:adder|:215" : LOCATION = LC4_B21;
"|LPM_ADD_SUB:863|addcore:adder|:219" : LOCATION = LC6_B21;
"|LPM_ADD_SUB:863|addcore:adder|:223" : LOCATION = LC2_B21;
"|LPM_ADD_SUB:863|addcore:adder|:227" : LOCATION = LC1_B19;
"|LPM_ADD_SUB:863|addcore:adder|:231" : LOCATION = LC5_B19;
"|LPM_ADD_SUB:863|addcore:adder|:235" : LOCATION = LC7_B19;
"|LPM_ADD_SUB:863|addcore:adder|:239" : LOCATION = LC2_B19;
"|LPM_ADD_SUB:863|addcore:adder|:243" : LOCATION = LC2_B17;
"|LPM_ADD_SUB:863|addcore:adder|:247" : LOCATION = LC5_B14;
"|LPM_ADD_SUB:863|addcore:adder|:251" : LOCATION = LC7_B14;
"|LPM_ADD_SUB:863|addcore:adder|:255" : LOCATION = LC2_B14;
"|LPM_ADD_SUB:863|addcore:adder|:259" : LOCATION = LC1_B13;
"|LPM_ADD_SUB:863|addcore:adder|:263" : LOCATION = LC5_B13;
"|LPM_ADD_SUB:863|addcore:adder|:267" : LOCATION = LC7_B13;
"|LPM_ADD_SUB:863|addcore:adder|:271" : LOCATION = LC2_B13;
"|LPM_ADD_SUB:863|addcore:adder|:275" : LOCATION = LC3_B18;
"|LPM_ADD_SUB:863|addcore:adder|:279" : LOCATION = LC5_B18;
"|LPM_ADD_SUB:863|addcore:adder|:283" : LOCATION = LC7_B18;
":3" : LOCATION = LC7_A11;
":5" : LOCATION = LC7_B17;
":8" : LOCATION = LC6_A11; -- finish1
":9" : LOCATION = LC3_A11; -- en_count1
":10" : LOCATION = LC6_B17; -- finish2
":11" : LOCATION = LC4_B17; -- en_count2
":60" : LOCATION = LC8_A4 ; -- cnt31
":61" : LOCATION = LC6_A4 ; -- cnt30
":62" : LOCATION = LC4_A4 ; -- cnt29
":63" : LOCATION = LC2_A4 ; -- cnt28
":64" : LOCATION = LC7_A12; -- cnt27
":65" : LOCATION = LC5_A12; -- cnt26
":66" : LOCATION = LC3_A12; -- cnt25
":67" : LOCATION = LC1_A1 ; -- cnt24
":68" : LOCATION = LC8_A1 ; -- cnt23
":69" : LOCATION = LC6_A1 ; -- cnt22
":70" : LOCATION = LC3_A1 ; -- cnt21
":71" : LOCATION = LC2_A11; -- cnt20
":72" : LOCATION = LC8_A6 ; -- cnt19
":73" : LOCATION = LC6_A6 ; -- cnt18
":74" : LOCATION = LC4_A6 ; -- cnt17
":75" : LOCATION = LC1_A3 ; -- cnt16
":76" : LOCATION = LC8_A7 ; -- cnt15
":77" : LOCATION = LC6_A7 ; -- cnt14
":78" : LOCATION = LC4_A7 ; -- cnt13
":79" : LOCATION = LC1_A8 ; -- cnt12
":80" : LOCATION = LC8_A8 ; -- cnt11
":81" : LOCATION = LC6_A8 ; -- cnt10
":82" : LOCATION = LC4_A8 ; -- cnt9
":83" : LOCATION = LC3_A3 ; -- cnt8
":84" : LOCATION = LC1_A10; -- cnt7
":85" : LOCATION = LC8_A10; -- cnt6
":86" : LOCATION = LC6_A10; -- cnt5
":87" : LOCATION = LC4_A10; -- cnt4
":88" : LOCATION = LC8_A2 ; -- cnt3
":89" : LOCATION = LC6_A2 ; -- cnt2
":90" : LOCATION = LC4_A2 ; -- cnt1
":91" : LOCATION = LC3_A2 ; -- cnt0
"~162~1" : LOCATION = LC3_A10;
"~162~2" : LOCATION = LC1_A2 ;
"~162~3" : LOCATION = LC4_A1 ;
"~162~4" : LOCATION = LC1_A6 ;
"~162~5" : LOCATION = LC2_A7 ;
"~162~6" : LOCATION = LC3_A8 ;
"~162~7" : LOCATION = LC4_A11;
"~162~8" : LOCATION = LC1_A4 ;
"~162~9" : LOCATION = LC8_A12;
"~162~10" : LOCATION = LC5_A11;
"~636~1" : LOCATION = LC1_A11;
":691" : LOCATION = LC8_B18; -- cnt31~345
":692" : LOCATION = LC6_B18; -- cnt30~345
":693" : LOCATION = LC4_B18; -- cnt29~345
":694" : LOCATION = LC1_B18; -- cnt28~345
":695" : LOCATION = LC8_B13; -- cnt27~345
":696" : LOCATION = LC6_B13; -- cnt26~345
":697" : LOCATION = LC3_B13; -- cnt25~345
":698" : LOCATION = LC3_B14; -- cnt24~345
":699" : LOCATION = LC8_B14; -- cnt23~345
":700" : LOCATION = LC6_B14; -- cnt22~345
":701" : LOCATION = LC4_B14; -- cnt21~345
":702" : LOCATION = LC3_B17; -- cnt20~345
":703" : LOCATION = LC8_B19; -- cnt19~345
":704" : LOCATION = LC6_B19; -- cnt18~345
":705" : LOCATION = LC3_B19; -- cnt17~345
":706" : LOCATION = LC8_B21; -- cnt16~345
":707" : LOCATION = LC7_B21; -- cnt15~345
":708" : LOCATION = LC5_B21; -- cnt14~345
":709" : LOCATION = LC3_B21; -- cnt13~345
":710" : LOCATION = LC4_B16; -- cnt12~345
":711" : LOCATION = LC8_B20; -- cnt11~345
":712" : LOCATION = LC6_B20; -- cnt10~345
":713" : LOCATION = LC4_B20; -- cnt9~345
":714" : LOCATION = LC8_B22; -- cnt8~345
":715" : LOCATION = LC8_B23; -- cnt7~345
":716" : LOCATION = LC7_B23; -- cnt6~345
":717" : LOCATION = LC5_B23; -- cnt5~345
":718" : LOCATION = LC3_B23; -- cnt4~345
":719" : LOCATION = LC8_B15; -- cnt3~345
":720" : LOCATION = LC6_B15; -- cnt2~345
":721" : LOCATION = LC3_B15; -- cnt1~345
":722" : LOCATION = LC5_B15; -- cnt0~345
"~793~1" : LOCATION = LC2_B23;
"~793~2" : LOCATION = LC1_B15;
"~793~3" : LOCATION = LC1_B14;
"~793~4" : LOCATION = LC4_B19;
"~793~5" : LOCATION = LC1_B21;
"~793~6" : LOCATION = LC3_B20;
"~793~7" : LOCATION = LC1_B20;
"~793~8" : LOCATION = LC2_B18;
"~793~9" : LOCATION = LC4_B13;
"~793~10" : LOCATION = LC5_B17;
"~1267~1" : LOCATION = LC1_B17;
END;
INTERNAL_INFO "pluse_delay"
BEGIN
DEVICE = EP1K10TC100-1;
OD5P39 : LORAX = "1:FB5->LC6_A11,->LC6_B17,->LC8_A4,->LC6_A4,->LC4_A4,->LC2_A4,->LC7_A12,->LC5_A12,->LC3_A12,->LC1_A1,->LC8_A1,->LC6_A1,->LC3_A1,->LC2_A11,->LC8_A6,->LC6_A6,->LC4_A6,->LC1_A3,->LC8_A7,->LC6_A7,->LC4_A7,->LC1_A8,->LC8_A8,->LC6_A8,->LC4_A8,->LC3_A3,->LC1_A10,->LC8_A10,->LC6_A10,->LC4_A10,->LC8_A2,->LC6_A2,->LC4_A2,->LC3_A2,->LC8_B18,->LC6_B18,->LC4_B18,->LC1_B18,->LC8_B13,->LC6_B13,->LC3_B13,->LC3_B14,->LC8_B14,->LC6_B14,->LC4_B14,->LC3_B17,->LC8_B19,->LC6_B19,->LC3_B19,->LC8_B21,->LC7_B21,->LC5_B21,->LC3_B21,->LC4_B16,->LC8_B20,->LC6_B20,->LC4_B20,->LC8_B22,->LC8_B23,->LC7_B23,->LC5_B23,->LC3_B23,->LC8_B15,->LC6_B15,->LC3_B15,->LC5_B15|";
LC2_A2 : LORAX = "1:MSW1R0C1,G29R0,PA17R0C9->LC5_A10,->LC4_A10|";
LC2_A10 : LORAX = "1:MSW1R0C9,G34R0,PA4R0C2->LC4_A3|";
LC2_A3 : LORAX = "1:MSW1R0C3,G35R0,PA3R0C7->LC5_A8,->LC7_A8,->LC2_A8,->LC4_A8|";
LC2_A8 : LORAX = "1:MSW2R0C6,G12R0,PA1R0C6->LC3_A7|";
LC1_A7 : LORAX = "1:MSW0R0C7|2:HHL23R0,PA11R0C2->LC1_A3|,2:G38R0,PA10R0C5->LC3_A6||";
LC2_A6 : LORAX = "1:MSW1R0C5,G11R0,PA2R0C10->LC8_A11,->LC2_A11|";
LC8_A11 : LORAX = "1:MSW7R0C11,G68R0,PA5R0C0->LC5_A1,->LC3_A1|";
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -