key_scan1.fit

用verilog实现的四乘四键盘程序,在Quartus II上编译通过并成功

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 08/26/2005 22:19:30      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "key_scan1"
BEGIN

    DEVICE = "EP1K100QC208-1";

    "clk_scan"                     : INPUT_PIN  = 79     ;
    "retn_in0"                     : INPUT_PIN  = 182    ;
    "retn_in1"                     : INPUT_PIN  = 184    ;
    "retn_in2"                     : INPUT_PIN  = 80     ;
    "retn_in3"                     : INPUT_PIN  = 78     ;
    "int"                          : OUTPUT_PIN = 8      ;
    "qout0"                        : OUTPUT_PIN = 10     ;
    "qout1"                        : OUTPUT_PIN = 9      ;
    "qout2"                        : OUTPUT_PIN = 202    ;
    "qout3"                        : OUTPUT_PIN = 203    ;
    "scan_out0"                    : OUTPUT_PIN = 147    ;
    "scan_out1"                    : OUTPUT_PIN = 148    ;
    "scan_out2"                    : OUTPUT_PIN = 149    ;
    "scan_out3"                    : OUTPUT_PIN = 150    ;
    ":25"                          : LOCATION   = LC2_A40;
    ":31"                          : LOCATION   = LC1_A40;  -- q1
    ":32"                          : LOCATION   = LC7_A48;  -- q0
    ":73"                          : LOCATION   = LC2_A48;
    ":74"                          : LOCATION   = LC4_A48;
    ":75"                          : LOCATION   = LC6_A48;
    ":76"                          : LOCATION   = LC1_A48;
    ":122"                         : LOCATION   = LC5_A40;
    "~127~1"                       : LOCATION   = LC7_A40;
    ":131"                         : LOCATION   = LC8_A40;  -- retn_out1
    ":132"                         : LOCATION   = LC6_A40;  -- retn_out0
    ":137"                         : LOCATION   = LC8_A48;
    ":138"                         : LOCATION   = LC3_A48;
    ":139"                         : LOCATION   = LC4_A40;
    ":140"                         : LOCATION   = LC3_A40;

END;

INTERNAL_INFO "key_scan1"
BEGIN
	DEVICE = EP1K100QC208-1;
    OD5P79  : LORAX = "1:FB5->LC1_A40,->LC7_A48,->LC8_A40,->LC6_A40|";
    OD1P182 : LORAX = "1:FB1|2:FH1R0,PA15R0C39->LC2_A40,->LC8_A40,->LC6_A40||";
    OD0P184 : LORAX = "1:FB0|2:FH0R0,PA16R0C39->LC2_A40,->LC5_A40,->LC7_A40||";
    OD3P80  : LORAX = "1:FB3|2:FH3R0,PA13R0C39->LC2_A40,->LC5_A40,->LC7_A40||";
    OD2P78  : LORAX = "1:FB2|2:FH2R0,PA14R0C39->LC2_A40,->LC5_A40,->LC7_A40||";
    LC2_A40 : LORAX = "1:MSW1R0C39,G45R0->OH1R0P8|2:PA22R0C47->LC7_A48,->LC8_A48,->LC3_A48||";
    LC1_A40 : LORAX = "1:MSW0R0C39,HHR41R0,PA18R0C47->LC2_A48,->LC4_A48,->LC6_A48,->LC1_A48,->LC8_A48|";
    LC7_A48 : LORAX = "1:MSW6R0C47,G151R0,PA3R0C39->LC1_A40|";
    LC2_A48 : LORAX = "1:MSW1R0C47,G59R0->OH9R0P150|";
    LC4_A48 : LORAX = "1:MSW3R0C47,G60R0->OH11R0P149|";
    LC6_A48 : LORAX = "1:MSW5R0C47,G180R0->OH13R0P148|";
    LC1_A48 : LORAX = "1:MSW0R0C47,V1C47,G78R1->OH8R1P147|";
    LC8_A48 : LORAX = "1:MSW7R0C47,V21C47->OV0C47P203|";
    LC3_A48 : LORAX = "1:MSW3R0C46,V9C46->OV0C46P202|";
    LC4_A40 : LORAX = "1:MSW3R0C39,HHR15R0->OH3R0P9|";
    LC3_A40 : LORAX = "1:MSW2R0C39,HHR14R0->OH2R0P10|";
	LC2_A40 : LORAX2 = "OD1P182, OD3P80, OD2P78, OD0P184";
	LC1_A40 : LORAX2 = "LC2_A40, X, LC1_A40, LC7_A48";
	LC7_A48 : LORAX2 = "LC2_A40, X, X, LC7_A48";
	LC2_A48 : LORAX2 = "X, X, LC1_A40, LC7_A48";
	LC4_A48 : LORAX2 = "X, X, LC1_A40, LC7_A48";
	LC6_A48 : LORAX2 = "X, X, LC1_A40, LC7_A48";
	LC1_A48 : LORAX2 = "X, X, LC1_A40, LC7_A48";
	LC5_A40 : LORAX2 = "LC6_A40, OD2P78, OD3P80, OD0P184";
	LC7_A40 : LORAX2 = "LC8_A40, OD3P80, OD2P78, OD0P184";
	LC8_A40 : LORAX2 = "LC7_A40, LC8_A40, OD1P182, LC2_A40";
	LC6_A40 : LORAX2 = "LC5_A40, LC6_A40, OD1P182, LC2_A40";
	LC8_A48 : LORAX2 = "X, LC1_A40, LC2_A40, LC8_A48";
	LC3_A48 : LORAX2 = "X, LC7_A48, LC2_A40, LC3_A48";
	LC4_A40 : LORAX2 = "X, LC8_A40, LC2_A40, LC4_A40";
	LC3_A40 : LORAX2 = "X, LC6_A40, LC2_A40, LC3_A40";
END;