count60.fit

大学vhdl语言实验大全,基于max-plus2平台,内有8-3译码器,8位加法器,数字钟

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 11/18/2004 14:20:55      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "count60"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "clr"                          : INPUT_PIN  = 2      ;
    "co"                           : OUTPUT_PIN = 72     ;
    "q0"                           : OUTPUT_PIN = 16     ;
    "q1"                           : OUTPUT_PIN = 19     ;
    "q2"                           : OUTPUT_PIN = 18     ;
    "q3"                           : OUTPUT_PIN = 17     ;
    "q4"                           : OUTPUT_PIN = 69     ;
    "q5"                           : OUTPUT_PIN = 71     ;
    "q6"                           : OUTPUT_PIN = 70     ;
    "q7"                           : OUTPUT_PIN = 73     ;
    ":6"                           : LOCATION   = LC6_A18;
    ":31"                          : LOCATION   = LC2_A12;
    ":32"                          : LOCATION   = LC2_A18;
    ":34"                          : LOCATION   = LC3_A18;
    "|74161:1|f74161:sub|:9"       : LOCATION   = LC1_A12;  -- |74161:1|f74161:sub|QA
    "|74161:1|f74161:sub|:87"      : LOCATION   = LC6_A12;  -- |74161:1|f74161:sub|QB
    "|74161:1|f74161:sub|:99"      : LOCATION   = LC5_A12;  -- |74161:1|f74161:sub|QC
    "|74161:1|f74161:sub|:110"     : LOCATION   = LC3_A12;  -- |74161:1|f74161:sub|QD
    "|74161:2|f74161:sub|:9"       : LOCATION   = LC7_A18;  -- |74161:2|f74161:sub|QA
    "|74161:2|f74161:sub|:87"      : LOCATION   = LC4_A18;  -- |74161:2|f74161:sub|QB
    "|74161:2|f74161:sub|:99"      : LOCATION   = LC5_A18;  -- |74161:2|f74161:sub|QC
    "|74161:2|f74161:sub|:110"     : LOCATION   = LC1_A18;  -- |74161:2|f74161:sub|QD

END;

INTERNAL_INFO "count60"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC1_A12,->LC6_A12,->LC5_A12,->LC3_A12|";
    OD1P2   : LORAX = "1:FB1|2:FH1R0|3:PA20R0C11->LC2_A12|,3:PA20R0C17->LC2_A18|||";
    LC3_A18 : LORAX = "1:MSW2R0C17,HHR15R0->OH2R0P72|";
    LC1_A12 : LORAX = "1:MSW0R0C11,HHL20R0->OH8R0P16|";
    LC6_A12 : LORAX = "1:MSW6R0C10,G82R0->OH14R0P19|2:PA3R0C17->LC6_A18||";
    LC5_A12 : LORAX = "1:MSW4R0C11,HHL30R0->OH12R0P18|";
    LC3_A12 : LORAX = "1:MSW2R0C11|2:G18R0,PA16R0C17->LC6_A18|,2:HHL15R0->OH10R0P17||";
    LC7_A18 : LORAX = "1:MSW7R0C16,HHR25R0->OH7R0P69|";
    LC4_A18 : LORAX = "1:MSW3R0C17,HHR10R0->OH3R0P71|";
    LC5_A18 : LORAX = "1:MSW4R0C17,HHR30R0->OH4R0P70|";
    LC1_A18 : LORAX = "1:MSW0R0C17,HHR20R0->OH0R0P73|";
	LC6_A18 : LORAX2 = "X, X, LC3_A12, LC6_A12";
	LC2_A12 : LORAX2 = "X, OD1P2, LC3_A12, LC6_A12";
	LC2_A18 : LORAX2 = "OD1P2, LC4_A18, LC5_A18, LC7_A18";
	LC3_A18 : LORAX2 = "X, LC4_A18, LC5_A18, LC7_A18";
	LC1_A12 : LORAX2 = "X, X, X, LC1_A12";
	LC6_A12 : LORAX2 = "X, X, LC1_A12, LC6_A12";
	LC5_A12 : LORAX2 = "X, LC5_A12, LC1_A12, LC6_A12";
	LC3_A12 : LORAX2 = "LC5_A12, LC1_A12, LC3_A12, LC6_A12";
	LC7_A18 : LORAX2 = "X, X, X, LC7_A18";
	LC4_A18 : LORAX2 = "X, X, LC4_A18, LC7_A18";
	LC5_A18 : LORAX2 = "X, LC5_A18, LC4_A18, LC7_A18";
	LC1_A18 : LORAX2 = "LC1_A18, LC5_A18, LC4_A18, LC7_A18";
END;