cnt_24.asm.talkback.xml

这是我在学习过程中编的数字钟的原程序,含各种时钟模块,以及计数器,累加器等,可以直接下载,已经编译通过!

<!--
This XML file (created on Sun Jun 05 15:07:30 2005) contains limited information
from the compilation of logic designs using Quartus II software (BUT NOT THE
LOGIC DESIGN FILES) that will be transmitted to Altera Corporation through
operation of the "TalkBack" feature.  To enable/disable this feature, run
qtb_install.exe located in your quartus/bin folder.  For more information, go
to www.altera.com/products/software/download/dnl-download_license.html
-->
<talkback>
<ver>5.0</ver>
<schema>quartus_version_5.0_build_148.xsd</schema><license>
	<host_id>00112f2abe5d</host_id>
	<nic_id>00112f2abe5d</nic_id>
	<cdrive_id>24356ad7</cdrive_id>
</license>
<tool>
	<name>Quartus II</name>
	<version>5.0</version>
	<build>Build 148</build>
	<module>quartus_asm.exe</module>
	<edition>Web Edition</edition>
	<compilation_end_time>Sun Jun 05 15:07:30 2005</compilation_end_time>
</tool>
<machine>
	<os>Windows XP</os>
	<cpu>
		<proc_count>2</proc_count>
		<cpu_freq units="MHz">2798</cpu_freq>
	</cpu>
	<ram units="MB">512</ram>
</machine>
<top_file>E:/liuwei/VHDL/clk/cnt_24</top_file>
<mep_data>
	<command_line>quartus_asm --read_settings_files=off --write_settings_files=off cnt_24 -c cnt_24</command_line>
</mep_data>
<software_data>
	<smart_recompile>off</smart_recompile>
</software_data>
<messages>
	<info>Info: Quartus II Assembler was successful. 0 errors, 0 warnings</info>
	<info>Info: Elapsed time: 00:00:02</info>
	<info>Info: Processing ended: Sun Jun 05 15:07:30 2005</info>
	<info>Info: Command: quartus_asm --read_settings_files=off --write_settings_files=off cnt_24 -c cnt_24</info>
	<info>Info: Running Quartus II Assembler</info>
</messages>
<assembler_settings>
	<row>
		<option>Use smart compilation</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Serial Vector Format File (.svf) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate a JEDEC STAPL Format File (.jam) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate an uncompressed Jam STAPL Byte Code 2.0 File (.jbc) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate a compressed Jam STAPL Byte Code 2.0 File (.jbc) for Target Device</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Compression mode</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Clock source for configuration device</option>
		<setting>Internal</setting>
		<default_value>Internal</default_value>
	</row>
	<row>
		<option>Clock frequency of the configuration device</option>
		<setting units="MHz">10</setting>
		<default_value units="MHz">10</default_value>
	</row>
	<row>
		<option>Divide clock frequency by</option>
		<setting>1</setting>
		<default_value>1</default_value>
	</row>
	<row>
		<option>Low-voltage mode</option>
		<setting>on</setting>
		<default_value>on</default_value>
	</row>
	<row>
		<option>JTAG user code for target device</option>
		<setting>7F</setting>
		<default_value>7F</default_value>
	</row>
	<row>
		<option>Auto user code</option>
		<setting>off</setting>
		<default_value>off</default_value>
	</row>
	<row>
		<option>Use configuration device</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Configuration device</option>
		<setting>Auto</setting>
		<default_value>Auto</default_value>
	</row>
	<row>
		<option>JTAG user code for configuration device</option>
		<setting>Ffffffff</setting>
		<default_value>Ffffffff</default_value>
	</row>
	<row>
		<option>Configuration device auto user code</option>
		<setting>off</setting>
		<default_value>off</default_value>
	</row>
	<row>
		<option>Auto-increment JTAG user code for multiple configuration devices</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Disable CONF_DONE and nSTATUS pull-ups on configuration device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Tabular Text File (.ttf) For Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Raw Binary File (.rbf) For Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Hexadecimal (Intel-Format) Output File (.hexout) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Hexadecimal Output File start address</option>
		<setting>0</setting>
		<default_value>0</default_value>
	</row>
	<row>
		<option>Hexadecimal Output File count direction</option>
		<setting>Up</setting>
		<default_value>Up</default_value>
	</row>
	<row>
		<option>Release clears before tri-states</option>
		<setting>off</setting>
		<default_value>off</default_value>
	</row>
	<row>
		<option>Auto-restart configuration after error</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
</assembler_settings>
</talkback>