mode_control.fit

用vhdl写的

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 12/03/2004 19:08:20      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "mode_control"
BEGIN

    DEVICE = "EPM7032LC44-6";

    "CLR"                          : INPUT_PIN  = 1      ;
    "DIN0"                         : INPUT_PIN  = 16     ; -- LC11
    "DIN1"                         : INPUT_PIN  = 14     ; -- LC10
    "DIN2"                         : INPUT_PIN  = 13     ; -- LC9
    "DIN3"                         : INPUT_PIN  = 12     ; -- LC8
    "DIN4"                         : INPUT_PIN  = 11     ; -- LC7
    "DIN5"                         : INPUT_PIN  = 9      ; -- LC6
    "DIN6"                         : INPUT_PIN  = 8      ; -- LC5
    "DIN7"                         : INPUT_PIN  = 43     ;
    "FC"                           : INPUT_PIN  = 18     ; -- LC13
    "FZ"                           : INPUT_PIN  = 19     ; -- LC14
    "Q"                            : INPUT_PIN  = 17     ; -- LC12
    "T1"                           : INPUT_PIN  = 4      ; -- LC1
    "T2"                           : INPUT_PIN  = 20     ; -- LC15
    "T3"                           : INPUT_PIN  = 2      ;
    "T4"                           : INPUT_PIN  = 44     ;
    "ALU_B"                        : OUTPUT_PIN = 29     ; -- LC27
    "CS"                           : OUTPUT_PIN = 32     ; -- LC25
    "LDAC"                         : OUTPUT_PIN = 34     ; -- LC23
    "LDAR"                         : OUTPUT_PIN = 26     ; -- LC30
    "LDDR"                         : OUTPUT_PIN = 24     ; -- LC32
    "LDFR"                         : OUTPUT_PIN = 27     ; -- LC29
    "LDIR"                         : OUTPUT_PIN = 25     ; -- LC31
    "LDPC"                         : OUTPUT_PIN = 33     ; -- LC24
    "LDR0"                         : OUTPUT_PIN = 28     ; -- LC28
    "LDR1"                         : OUTPUT_PIN = 31     ; -- LC26
    "LDR2"                         : OUTPUT_PIN = 41     ; -- LC17
    "LED_B"                        : OUTPUT_PIN = 21     ; -- LC16
    "load"                         : OUTPUT_PIN = 40     ; -- LC18
    "R0_B"                         : OUTPUT_PIN = 38     ; -- LC20
    "R1_B"                         : OUTPUT_PIN = 37     ; -- LC21
    "R2_B"                         : OUTPUT_PIN = 36     ; -- LC22
    "SW_B"                         : OUTPUT_PIN = 5      ; -- LC2
    "S0"                           : OUTPUT_PIN = 6      ; -- LC3
    "S1"                           : OUTPUT_PIN = 7      ; -- LC4
    "WR"                           : OUTPUT_PIN = 39     ; -- LC19
    ":37"                          : LOCATION   = LC1    ; -- PIN 4  -- M

END;

INTERNAL_INFO "mode_control"
BEGIN
	DEVICE = EPM7032LC44-6;
	LC18    : LORAX = "G14R0";
	LC24    : LORAX = "G33R0";
	LC30    : LORAX = "G56R0";
	LC31    : LORAX = "G57R0";
	LC28    : LORAX = "G41R0";
	LC26    : LORAX = "G39R0";
	LC17    : LORAX = "G13R0";
	LC20    : LORAX = "G16R0";
	LC21    : LORAX = "G30R0";
	LC22    : LORAX = "G31R0";
	LC4     : LORAX = "G12R0";
	LC3     : LORAX = "G11R0";
	LC27    : LORAX = "G40R0";
	LC23    : LORAX = "G32R0";
	LC32    : LORAX = "G58R0";
	LC19    : LORAX = "G15R0";
	LC25    : LORAX = "G38R0";
	LC2     : LORAX = "G10R0";
	LC16    : LORAX = "G54R0";
	LC29    : LORAX = "G55R0";
	OH13R0P19 : LORAX = "G18R0,PA13R0C1";
	OH12R0P18 : LORAX = "G17R0,PA15R0C1";
	OH32R0P43 : LORAX = "G59R0,PA27R0C0,PA27R0C1";
	OH4R0P8 : LORAX = "G60R0,PA29R0C0,PA32R0C1";
	OH5R0P9 : LORAX = "G61R0,PA28R0C1,PA28R0C0";
	OH6R0P11 : LORAX = "G62R0,PA34R0C0,PA34R0C1";
	OH33R0P44 : LORAX = "G42R0,PA18R0C0,PA18R0C1";
	LC1     : LORAX = "G9R0,PA4R0C0,PA4R0C1";
	OH11R0P17 : LORAX = "G3R0,PA3R0C1,PA8R0C1";
	OH35R0P2 : LORAX = "G8R0,PA0R0C0,PA0R0C1";
	OH0R0P4 : LORAX = "G43R0,PA20R0C0,PA20R0C1";
	OH14R0P20 : LORAX = "G19R0,PA9R0C1";
	OH9R0P14 : LORAX = "G1R0,PA5R0C1";
	OH10R0P16 : LORAX = "G2R0,PA7R0C1";
	OH7R0P12 : LORAX = "G63R0,PA29R0C1";
	OH8R0P13 : LORAX = "G0R0,PA6R0C1,PA8R0C0";
END;