Xilinx UltraScale™ 架构针对要求最严苛的应用，提供了前所未有的ASIC级的系统级集成和容量。 UltraScale架构是业界首次在All Programmable架构中应用最先进的ASIC架构优化。该架构能从20nm平面FET结构扩展至16nm鳍式FET晶体管技术甚至更高的技术，同 时还能从单芯片扩展到3D IC。借助Xilinx Vivado®设计套件的分析型协同优化，UltraScale架构可以提供海量数据的路由功能，同时还能智能地解决先进工艺节点上的头号系统性能瓶颈。 这种协同设计可以在不降低性能的前提下达到实现超过90%的利用率。 UltraScale架构的突破包括： • 几乎可以在晶片的任何位置战略性地布置类似于ASIC的系统时钟，从而将时钟歪斜降低达50% • 系统架构中有大量并行总线，无需再使用会造成时延的流水线，从而可提高系统速度和容量 • 甚至在要求资源利用率达到90%及以上的系统中，也能消除潜在的时序收敛问题和互连瓶颈 • 可凭借3D IC集成能力构建更大型器件，并在工艺技术方面领先当前行业标准整整一代 • 能在更低的系统功耗预算范围内显著提高系统性能，包括多Gb串行收发器、I/O以及存储器带宽 • 显著增强DSP与包处理性能 赛灵思UltraScale架构为超大容量解决方案设计人员开启了一个全新的领域。
标签： UltraScale Xilinx 架构
上传时间： 2013-11-17
上传用户：皇族传媒
This application note describes how to build a system that can be used for determining theoptimal phase shift for a Double Data Rate (DDR) memory feedback clock. In this system, theDDR memory is controlled by a controller that attaches to either the OPB or PLB and is used inan embedded microprocessor application. This reference system also uses a DCM that isconfigured so that the phase of its output clock can be changed while the system is running anda GPIO core that controls that phase shift. The GPIO output is controlled by a softwareapplication that can be run on a PowerPC® 405 or Microblaze™ microprocessor.
上传时间： 2013-10-14
上传用户：euroford
This application note covers the design considerations of a system using the performance features of the LogiCORE™ IP Advanced eXtensible Interface (AXI) Interconnect core. The design focuses on high system throughput through the AXI Interconnect core with F MAX and area optimizations in certain portions of the design. The design uses five AXI video direct memory access (VDMA) engines to simultaneously move 10 streams (five transmit video streams and five receive video streams), each in 1920 x 1080p format, 60 Hz refresh rate, and up to 32 data bits per pixel. Each VDMA is driven from a video test pattern generator (TPG) with a video timing controller (VTC) block to set up the necessary video timing signals. Data read by each AXI VDMA is sent to a common on-screen display (OSD) core capable of multiplexing or overlaying multiple video streams to a single output video stream. The output of the OSD core drives the DVI video display interface on the board. Performance monitor blocks are added to capture performance data. All 10 video streams moved by the AXI VDMA blocks are buffered through a shared DDR3 SDRAM memory and are controlled by a MicroBlaze™ processor. The reference system is targeted for the Virtex-6 XC6VLX240TFF1156-1 FPGA on the Xilinx® ML605 Rev D evaluation board
上传时间： 2013-11-14
上传用户：fdmpy
摘要：本文简要介绍了Xilinx最新的EDK9.1i和ISE9.1i等工具的设计使用流程，最终在采用65nm工艺级别的Xilinx Virtex-5 开发板ML505 上同时设计实现了支持TCP/IP 协议的10M/100M/1000M 的三态以太网和千兆光以太网的SOPC 系统,并对涉及的关键技术进行了说明。关键词：FPGA；EDK；SOPC；嵌入式开发；EMAC；MicroBlaze 本研究采用业界最新的Xilinx 65ns工艺级别的Virtex-5LXT FPGA 高级开发平台，满足了对于建造具有更高性能、更高密度、更低功耗和更低成本的可编程片上系统的需求。Virtex-5以太网媒体接入控制器(EMAC)模块提供了专用的以太网功能，它和10/100/1000Base-T外部物理层芯片或RocketIOGTP收发器、SelectIO技术相结合，能够分别实现10M/100M/1000M的三态以太网和千兆光以太网的SOPC 系统。
上传时间： 2013-10-13
上传用户：sun_pro12580
This is the Xilinx Dual Processor Reference Designs suite. The designs illustrate a few differentdual-core architectures based on the MicroBlaze™ and PowerPC™ processors. The designsillustrate various concepts described in the Xilinx White Paper WP262 titled, “DesigningMultiprocessor Systems in Platform Studio”. There are simple software applications includedwith the reference designs that show various forms of interaction between the two processors.
上传时间： 2013-10-29
上传用户：旭521
Xilinx UltraScale™ 架构针对要求最严苛的应用，提供了前所未有的ASIC级的系统级集成和容量。 UltraScale架构是业界首次在All Programmable架构中应用最先进的ASIC架构优化。该架构能从20nm平面FET结构扩展至16nm鳍式FET晶体管技术甚至更高的技术，同 时还能从单芯片扩展到3D IC。借助Xilinx Vivado®设计套件的分析型协同优化，UltraScale架构可以提供海量数据的路由功能，同时还能智能地解决先进工艺节点上的头号系统性能瓶颈。 这种协同设计可以在不降低性能的前提下达到实现超过90%的利用率。 UltraScale架构的突破包括： • 几乎可以在晶片的任何位置战略性地布置类似于ASIC的系统时钟，从而将时钟歪斜降低达50% • 系统架构中有大量并行总线，无需再使用会造成时延的流水线，从而可提高系统速度和容量 • 甚至在要求资源利用率达到90%及以上的系统中，也能消除潜在的时序收敛问题和互连瓶颈 • 可凭借3D IC集成能力构建更大型器件，并在工艺技术方面领先当前行业标准整整一代 • 能在更低的系统功耗预算范围内显著提高系统性能，包括多Gb串行收发器、I/O以及存储器带宽 • 显著增强DSP与包处理性能 赛灵思UltraScale架构为超大容量解决方案设计人员开启了一个全新的领域。
标签： UltraScale Xilinx 架构
上传时间： 2013-12-23
上传用户：小儒尼尼奥
This application note describes how to build a system that can be used for determining theoptimal phase shift for a Double Data Rate (DDR) memory feedback clock. In this system, theDDR memory is controlled by a controller that attaches to either the OPB or PLB and is used inan embedded microprocessor application. This reference system also uses a DCM that isconfigured so that the phase of its output clock can be changed while the system is running anda GPIO core that controls that phase shift. The GPIO output is controlled by a softwareapplication that can be run on a PowerPC® 405 or Microblaze™ microprocessor.
上传时间： 2014-11-26
上传用户：erkuizhang
This application note covers the design considerations of a system using the performance features of the LogiCORE™ IP Advanced eXtensible Interface (AXI) Interconnect core. The design focuses on high system throughput through the AXI Interconnect core with F MAX and area optimizations in certain portions of the design. The design uses five AXI video direct memory access (VDMA) engines to simultaneously move 10 streams (five transmit video streams and five receive video streams), each in 1920 x 1080p format, 60 Hz refresh rate, and up to 32 data bits per pixel. Each VDMA is driven from a video test pattern generator (TPG) with a video timing controller (VTC) block to set up the necessary video timing signals. Data read by each AXI VDMA is sent to a common on-screen display (OSD) core capable of multiplexing or overlaying multiple video streams to a single output video stream. The output of the OSD core drives the DVI video display interface on the board. Performance monitor blocks are added to capture performance data. All 10 video streams moved by the AXI VDMA blocks are buffered through a shared DDR3 SDRAM memory and are controlled by a MicroBlaze™ processor. The reference system is targeted for the Virtex-6 XC6VLX240TFF1156-1 FPGA on the Xilinx® ML605 Rev D evaluation board
上传时间： 2013-11-23
上传用户：shen_dafa
摘要：本文简要介绍了Xilinx最新的EDK9.1i和ISE9.1i等工具的设计使用流程，最终在采用65nm工艺级别的Xilinx Virtex-5 开发板ML505 上同时设计实现了支持TCP/IP 协议的10M/100M/1000M 的三态以太网和千兆光以太网的SOPC 系统,并对涉及的关键技术进行了说明。关键词：FPGA；EDK；SOPC；嵌入式开发；EMAC；MicroBlaze 本研究采用业界最新的Xilinx 65ns工艺级别的Virtex-5LXT FPGA 高级开发平台，满足了对于建造具有更高性能、更高密度、更低功耗和更低成本的可编程片上系统的需求。Virtex-5以太网媒体接入控制器(EMAC)模块提供了专用的以太网功能，它和10/100/1000Base-T外部物理层芯片或RocketIOGTP收发器、SelectIO技术相结合，能够分别实现10M/100M/1000M的三态以太网和千兆光以太网的SOPC 系统。
上传时间： 2013-10-28
上传用户：DE2542
uC/OS-II Notes from Nohau Corporation The code associated with this readme.txt file is provided "as is". The code was written with the intention of creating a functional RTOS demo for the Nohau evaluation boards that can run a MicroBlaze core. You can use this code for any and all of your projects, as you see fit. Nohau Corporation does not warrant that the code is bug-free, and will provide no support for this RTOS port.
标签： Corporation associated provided readme
上传时间： 2013-12-26
上传用户：tzl1975
