transimpedance linearization circuitry. This allows it to drive video loads with excellent differential gain and phase perfor mance on only 50 mW of power. The AD8001 is a current feedback amplifier and features gain flatness of 0.1 dB to 100 MHz while offering differential gain and phase error of 0.01% and 0.025°. This makes the AD8001 ideal for professional video electronics such as cameras and video switchers. Additionally, the AD8001’s low distortion and fast settling make it ideal for buffer high-speed A-to-D converters. The AD8001 offers low power of 5.5 mA max (VS = ±5 V) and can run on a single +12 V power supply, while being capable of delivering over 70 mA of load current. These features make this amplifier ideal for portable and battery-powered applications where size and power are critical. The outstanding bandwidth of 800 MHz along with 1200 V/µs of slew rate make the AD8001 useful in many general purpose high-speed applications where dual power supplies of up to ±6 V and single supplies from 6 V to 12 V are needed. The AD8001 is available in the industrial temperature range of –40°C to +85°C.
上传时间： 2020-04-21
上传用户：su1254
The PW5410B is a low noise, constant frequency (1.2MHz) switched capacitor voltage doubler. Itproduces a regulated output voltage from 1.8V to 5V input with up to 100mA of output current. Lowexternal parts count (one flying capacitor and two small bypass capacitors at VIN and VOUT) makethe PW5410B ideally suited for small, battery-powered applications
标签： pw5410
上传时间： 2022-02-11
上传用户：wangshoupeng199
The PW5410A is a low noise, constant frequency (1.2MHz) switched capacitor voltage doubler. Itproduces a regulated output voltage from 2.7V to 5V input with up to 250mA of output current. Lowexternal parts count (one flying capacitor and two small bypass capacitors at VIN and VOUT) makethe PW5410A ideally suited for small, battery-powered applications
标签： pw5410
上传时间： 2022-02-11
上传用户：
随着电力电子技术的发展，高压换流设备在工业应用中日益广泛。其核心元件晶闸管（SCR）的电压与电流越来越高（已达到10KV/10KA以上），应用场合要求也越来越高。在国际上，晶闸管的光控技术发展日益成熟。根据对国内晶闸管技术发展前景和需求的展望，本文采用自供电驱动技术与光控技术相结合，研发光控自供电晶闸管驱动控制板，然后与晶闸管本体相结合即形成光控晶闸管工程化实现模型，其可作为光控晶闸管的替代技术。 在工程应用中，光控晶闸管的典型应用场合为四象限高压变频器和国家大型直流输变电系统等。随着国家节能工程的实施，高压变频器的应用范围越来越广泛，已成为工业节能中的重要环节。高压直流换流系统难度大，技术复杂，要求高，本论文研究的光控晶闸管替代技术只作为其储备技术之一。本论文以电流源型高压变频器作为该光控晶闸管替代技术的应用背景重点阐述。 电流源型高压变频器为了提高单机容量，通常是数个SCR串联使用。随着系统容量越来越大，装置对高压开关器件的要求也越来越高。如果一组串联SCR中某一个SCR该导通时没有导通，那么加在该组SCR上的电压都将加到该SCR上形成过电压，造成该器件的击穿损坏，甚至于一组串联SCR都被烧坏。为了克服上述问题，保证高压变频器中串联晶闸管能够安全可靠的工作，提高系统可靠性，有必要为晶闸管配备后备驱动系统。本文提出了给SCR驱动电路增设自供电驱动系统——SPDS （Self—Powered Drive System）的解决办法。SPDS基本功能是通过高位取能电路利用RC缓冲电路中的能量为监测电路和后备触发电路提供正常工作所需要的能量。它的优点是由于缓冲电路与晶闸管同电位，自供电驱动系统要求的电压隔离水平可以从几千伏降低到几百伏，节省了高压隔离变压器，节省了成本和体积，提高了系统可靠性。国外对相关内容已经有了深入研究，并将其应用在高压变频器产品中。在国内，目前还没有查到相关文献。本文为基于晶闸管的电流源型高压变频器设计了一种高压晶闸管自供电驱动系统，填补了国内空白，为自供电驱动系统的推广应用和其他高压开关器件自供电驱动系统的研制提供了参考。 本文详细介绍了串联高压晶闸管驱动系统的要求和RC缓冲电路的工作特 点，进而提出了SPDS的工作原理和具体实现方式，阐述了SPDS各部分组成及其功能。SPDS的核心技术是取能回路和触发方式的设计。本文在比较各种高压取能方式和触发方式优缺点的基础上，选择采用RC缓冲取能方式和光纤触发方式。 论文基于Multisim10仿真软件，结合高压晶闸管自供电驱动系统取能电路的原理，对高压晶闸管自供电驱动系统的核心部分——SPDS取能电路进行了仿真。通过搭建带SPDS取能电路的单相晶闸管仿真电路和电流源型高压变频器前侧变流电路的仿真模型，详细讨论了影响RC取能回路正常工作的各种因素。同时，通过设定仿真电路的参数，分析了其工作状况。根据得到的仿真波形图，证明了高压晶闸管自供电驱动系统可以达到有效触发晶闸管导通的设计目标，具有可行性。 为考察SPDS的实际工作性能，本文搭建了简易的SPDS低压硬件实验平台，为其高压条件下的工程化应用打好了基础。 在论文的最后，对高压晶闸管自供电驱动系统的发展方向进行了展望。 关键词：高压变频器；晶闸管驱动；自供电系统；高压换流；光控晶闸管
上传时间： 2013-05-26
上传用户：riiqg1989
The OCP3601 is a boost topology switching regulator control IC for battery-used applications fiel
标签： Controller Step-Up 3601 DCDC
上传时间： 2013-06-11
上传用户：2780285129
General Description The LM621 is a bipolar IC designed for commutation of brushless DC motors. The part is compatible with both three- and four-phase motors. It can directly drive the power switching devices used to drive the motor. The LM621 provides an adjustable dead-time circuit to eliminate ``shootthrough'' current spiking in the power switching circuitry. Operation is from a 5V supply, but output swings of up to 40V are accommodated. The part is packaged in an 18-pin, dual-in-line package.
上传时间： 2013-07-24
上传用户：sdq_123
FEATURES Unique 1-Wire interface requires only one port pin for communication Multidrop capability simplifies distributed temperature sensing applications Requires no external components Can be powered from data line. Power supply range is 3.0V to 5.5V Zero standby power required Measures temperatures from -55°C to +125°C. Fahrenheit equivalent is -67°F to +257°F ±0.5°C accuracy from -10°C to +85°C Thermometer resolution is programmable from 9 to 12 bits Converts 12-bit temperature to digital word in 750 ms (max.) User-definable, nonvolatile temperature alarm settings Alarm search command identifies and addresses devices whose temperature is outside of programmed limits (temperature alarm condition) Applications include thermostatic controls, industrial systems, consumer products, thermometers, or any thermally sensitive system
上传时间： 2013-08-04
上传用户：CHENKAI
英文描述： BCD-to-Seven-Segment Decoder Driver(Internal Pull-up outputs) 中文描述： BCD码到七段解码器驱动程序（内部上拉输出）
上传时间： 2013-07-13
上传用户：cc1015285075
英文描述： Synchronous Up/Down Decade Counters(single clock line) 中文描述： 同步向上/向下十年计数器（单时钟线）
上传时间： 2013-06-18
上传用户：haohaoxuexi
LPC178* 177*用户手册 LPC178x/7x 32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 96 kB SRAM; USB Device/Host/OTG; Ethernet; LCD; EMC Rev. 3 — 27 December 2011 Objective data sheet
上传时间： 2013-04-24
上传用户：胡佳明胡佳明
