The LPC2292/2294 microcontrollers are based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 256 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 pct with minimal performance penalty. With their 144-pin package, low power consumption, various 32-bit timers, 8-channel 10-bit ADC, 2/4 (LPC2294) advanced CAN channels, PWM channels and up to nine external interrupt pins these microcontrollers are particularly suitable for automotive and industrial control applications as well as medical systems and fault-tolerant maintenance buses. The number of available fast GPIOs ranges from 76 (with external memory) through 112 (single-chip). With a wide range of additional serial communications interfaces, they are also suited for communication gateways and protocol converters as well as many other general-purpose applications. Remark: Throughout the data sheet, the term LPC2292/2294 will apply to devices with and without the /00 or /01 suffix. The suffixes /00 and /01 will be used to differentiate from other devices only when necessary.
上传时间： 2014-12-30
上传用户：aysyzxzm
LVDS、xECL、CML（低电压差分信号传输、发射级耦合逻辑、电流模式逻辑）………4多点式低电压差分信号传输(M-LVDS) ……………………………………………………8数字隔离器 ………………………………………………………………………………10RS-485/422 …………………………………………………………………………………11RS-232………………………………………………………………………………………13UART（通用异步收发机）…………………………………………………………………16CAN（控制器局域网）……………………………………………………………………18FlatLinkTM 3G ………………………………………………………………………………19SerDes（串行G 比特收发机及LVDS）……………………………………………………20DVI（数字视频接口）/PanelBusTM ………………………………………………………22TMDS（最小化传输差分信号） …………………………………………………………24USB 集线器控制器及外设器件 …………………………………………………………25USB 接口保护 ……………………………………………………………………………26USB 电源管理 ……………………………………………………………………………27PCI Express® ………………………………………………………………………………29PCI 桥接器 …………………………………………………………………………………33卡总线 (CardBus) 电源开关 ………………………………………………………………341394 (FireWire®, 火线®) ……………………………………………………………………36GTLP (Gunning Transceiver Logic Plus，体效应收发机逻辑+) ………………………………39VME（Versa Module Eurocard）总线 ………………………………………………………41时钟分配电路 ……………………………………………………………………………42交叉参考指南 ……………………………………………………………………………43器件索引 …………………………………………………………………………………47技术支持 …………………………………………………………………………………48 德州仪器（TI）为您提供了完备的接口解决方案，使得您的产品别具一格，并加速了产品面市。凭借着在高速、复合信号电路、系统级芯片 (system-on-a-chip ) 集成以及先进的产品开发工艺方面的技术专长，我们将能为您提供硅芯片、支持工具、软件和技术文档，使您能够按时的完成并将最佳的产品推向市场，同时占据一个具有竞争力的价格。本选择指南为您提供与下列器件系列有关的设计考虑因素、技术概述、产品组合图示、参数表以及资源信息：
上传时间： 2013-10-21
上传用户：Jerry_Chow
介绍了SoPC（System on a Programmable Chip）系统的概念和特点，给出了基于PLB总线的异步串行通信（UART）IP核的硬件设计和实现。通过将设计好的UART IP核集成到SoPC系统中加以验证，证明了所设计的UART IP核可以正常工作。该设计方案为其他基于SoPC系统IP核的开发提供了一定的参考。
上传时间： 2013-11-12
上传用户：894448095
Introduction to Xilinx Packaging Electronic packages are interconnectable housings for semiconductor devices. The major functions of the electronic packages are to provide electrical interconnections between the IC and the board and to efficiently remove heat generated by the device. Feature sizes are constantly shrinking, resulting in increased number of transistors being packed into the device. Today's submicron technology is also enabling large-scale functional integration and system-on-a-chip solutions. In order to keep pace with these new advancements in silicon technologies, semiconductor packages have also evolved to provide improved device functionality and performance. Feature size at the device level is driving package feature sizes down to the design rules of the early transistors. To meet these demands, electronic packages must be flexible to address high pin counts, reduced pitch and form factor requirements. At the same time,packages must be reliable and cost effective.
上传时间： 2013-11-21
上传用户：不懂夜的黑
Abstract: This application note discusses the development and deployment of 3G cellular femtocell base stations. The technicalchallenges for last-mile residential connectivity and adding system capacity in dense urban environments are discussed, with 3Gfemtocell base stations as a cost-effective solution. Maxim's 3GPP TS25.104-compliant transceiver solution is presented along withcomplete radio reference designs such as RD2550. For more information on the RD2550, see reference design 5364, "FemtocellRadio Reference Designs Using the MAX2550–MAX2553 Transceivers."
标签： Base-Station Applications Single-Chip Transceiver
上传时间： 2013-11-05
上传用户：超凡大师
Designing withProgrammable Logicin an Analog WorldProgrammable logic devices revolutionizeddigital design over 25 years ago,promising designers a blank chip todesign literally any function and programit in the field. PLDs can be low-logicdensity devices that use nonvolatilesea-of-gates cells called complexprogrammable logic devices (CPLDs)or they can be high-density devicesbased on SRAM look-up tables (LUTs)
标签： Solutions Analog Altera FPGAs
上传时间： 2013-10-27
上传用户：fredguo
This document provides practical, common guidelines for incorporating PCI Express interconnect layouts onto Printed Circuit Boards (PCB) ranging from 4-layer desktop baseboard designs to 10- layer or more server baseboard designs. Guidelines and constraints in this document are intended for use on both baseboard and add-in card PCB designs. This includes interconnects between PCI Express devices located on the same baseboard (chip-to-chip routing) and interconnects between a PCI Express device located “down” on the baseboard and a device located “up” on an add-in card attached through a connector. This document is intended to cover all major components of the physical interconnect including design guidelines for the PCB traces, vias and AC coupling capacitors, as well as add-in card edge-finger and connector considerations. The intent of the guidelines and examples is to help ensure that good high-speed signal design practices are used and that the timing/jitter and loss/attenuation budgets can also be met from end-to-end across the PCI Express interconnect. However, while general physical guidelines and suggestions are given, they may not necessarily guarantee adequate performance of the interconnect for all layouts and implementations. Therefore, designers should consider modeling and simulation of the interconnect in order to ensure compliance to all applicable specifications. The document is composed of two main sections. The first section provides an overview of general topology and interconnect guidelines. The second section concentrates on physical layout constraints where bulleted items at the beginning of a topic highlight important constraints, while the narrative that follows offers additional insight.
上传时间： 2014-01-24
上传用户：s363994250
PQP is a library for performing three types of proximity queries on a pair of geometric models composed of triangles:
标签： performing geometric proximity library
上传时间： 2014-01-13
上传用户：love_stanford
uClinux on ARM7TDMI(ppt)
上传时间： 2013-12-11
上传用户：shizhanincc
TheTool is highy customizable map editor(based on QT) which can be extended via LUA scripts. A first implentation is ready and can be published to the public. The editor is the perfect tool who wants to design some 3d games but don t have time to write
标签： customizable extended TheTool scripts
上传时间： 2013-12-12
上传用户：lanwei
