虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

bottom-up

  • 射频 LAYOUT 应用指导

    影响共面波导特性阻抗的主要因素有,基材介电常数(通常为 4.2~4.6,这里取 4.4)、信号层与参考地间距 H、线宽 W、对地间隙 S、铜皮厚度 T。表 1 列出了不同信号层与参考地间距 H 和铜皮厚度 T=0.035mm时,50 欧姆特性阻抗对应的线宽 W 及对地间隙 S 推荐值:表 1:不同信号层与参考地间距所对应的 50 欧姆共面波导线宽及对地间距推荐值如果是 2 层板,信号层为 Top 层,参考地为 Bottom 层,如下图 3。如果是 4 层板,参考地可以是第 2层、第 3 层或者第 4 层。若参考地是第 3 层,信号层正下方第 2 层要禁铺,禁铺区域的宽度至少是信号线宽的 5 倍,如下图 4。若参考地是第 4 层,信号层正下方第 2 层和第 3 层都要禁铺,禁铺区域的宽度至少是信号线宽的 5 倍,如下图 5。如果是 6 层板以上以此类推。

    标签: 射频

    上传时间: 2022-07-17

    上传用户:

  • TFT-LCD iC ILI9881D datasheet

    ILI9881D Data Sheet for all customerAmorphous TFT LCD Single-Chip Driver 800(RGB)X1280 Resoltion,16.7M-Color Without internal Gramtwo data lanes supports up to 850Mbps on the mipi DSI link

    标签: tft ili9881d

    上传时间: 2022-07-19

    上传用户:bluedrops

  • 高级PID控制算法.

    Simulation can provide a lot of information about what the system is doing. We canadd the effect of different element, like Encoder resolution, ADC sampling rate, etc and understand how does it affect the system. Another benefit is the possibility to slow down the process, to gain insight on what happens of fast systems or, vice versa, speed up slow process.Because National Instruments is a unique company in the fact the we provide a fullhardware solution couple with a full development platform, we can use this tools in very particular ways For example, it is possible to combine the LabVIEW Control Design and Simulation Module along with the FPGA module to quickly prototype a controller. One of the main benefits of this approach is that there is no need to compile the FPGA code, which allows for a quick algorithm design turnaround and debugging.

    标签: pid控制

    上传时间: 2022-07-20

    上传用户:

  • GD32F103数据手册(英文)

    The GD32F103xx device is a 32-bit general-purpose microcontroller based on the ARM?Cortex?-M3 RISC core with best ratio in terms of processing power, reduced power consumption and peripheral set. The Cortex?-M3 is a next generation processor core whichis tightly coupled with a Nested Vectored Interrupt Controller (NVIC), SysTick timer and advanced debug support.The GD32F103xx device incorporates the ARM ' Cortex?-M3 32-bit processor core operating at 108 MHz frequency with Flash accesses zero wait states to obtain maximumefficiency. It provides up to 3 MB on-chip Flash memory and up to 96 KB SRAM memory. An extensive range of enhanced I/Os and peripherals connected to two APB buses. The devices offer up to three 12-bit ADCs, up to two 12-bit DACs, up to ten general-purpose

    标签: gd32f103

    上传时间: 2022-07-23

    上传用户:aben

  • saber学习心得

    一般调用元件的话,使用PartGallery的search功能都能找到相应的器件。注意MaST IOLAMS这里有两种不同语言描述的元件,一般不能同时在一张原理图中使用。在PartGallery中browse目录按照大的应用领域和市场领域划分。比喻Elctrical目录下包含一些电气行业相关的模型。1.翻转元件:选中该元件(可选多个),按R键,可实现90度翻转。按F键可实现180度翻转。2.电容或电感初始电压或电流值设置:在电容或电感元件的属性里有一项ic设置,默认未设置(undef),设置其为想要的值即可。3.Saber中,设置元件属性时,不能带任何单位符号,如电阻的“9,”电压的“V”时间的“S等,否则saber会报错。4.Saber中,仿真文件名不能和元件库中的元件同名,否则会报错。5.Saber中,原理图名称最好不要与路径名中有重复,否则会报错。6.原理图放大或缩小:按“page up或”“page down即可7.局部放大显示波形:直接拖动鼠标放大,或按“page up即可8.恢复波形显示原始大小:按“page down,”在右键菜单里点“zoom→tofi即可”9.按鼠标中键可拖动整个原理图包括波形显示图。

    标签: saber

    上传时间: 2022-07-23

    上传用户:

  • MT7628手册(英文版)

    The following table covers the main features offered by the MT7628KN and MT7628AN. Overall, the MT7628KN supports the requirements of an entry level AP/router, while the more advanced MT7628AN supports a number of interfaces together with a large maximum RAM capacity.Features· Embedded MIPS24KEc (575/580 MHz) with 64KBl-Cache and 32KB D-Cache·2T2R 2.4GHz with 300 Mbps PHY data rate· Legacy 802.11b/g and HT 802.11n modes·20/40 MHz channel bandwidth· Reverse Data Grant(RDG)· Maximal Ratio Combining(MRC)· Space Time Block Coding(STBC)· MCM 8 Mbytes DDR1 KGD(MT7628KN)·16-bit DDR1/2 up to 128/256 Mbytes(MT7628AN/KN)· SPI/SD-XC/eMMC·x1 USB 2.0 Host,x1 Ple Root Complex·5-port 10/100 FE PHY

    标签: mt7628

    上传时间: 2022-07-25

    上传用户:

  • L6470Demo程序

    STM32F驱动L6470   ■ Operating voltage: 8 - 45 V■ 7.0 A out peak current (3.0 A r.m.s.)■ Low RDS(on) Power MOSFETs■ Programmable speed profile and positioning■ Programmable power MOS slew rate■ Up to 1/128 microstepping■ Sensorless stall detection■ SPI interface■ Low quiescent and standby currents■ Programmable non-dissipative overcurrentprotection on high and low-side■ Two levels of overtemperature protection

    标签: l6470

    上传时间: 2022-07-25

    上传用户:kingwide

  • STM32F407VET6数据手册

    STM32F407VET6数据手册Core: ARM 32-bit Cortex™-M4 CPU with FPU,Adaptive real-time accelerator (ARTAccelerator™) allowing 0-wait state executionfrom Flash memory, frequency up to 168   MHz,memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSPinstructions

    标签: stm32f407vet6 数据手册

    上传时间: 2022-07-25

    上传用户:

  • VIP专区-嵌入式/单片机编程源码精选合集系列(65)

    VIP专区-嵌入式/单片机编程源码精选合集系列(65)资源包含以下内容:1. DM9161应用电路原理图来自DAVICOM网站。需要的可以自由下载.2. ALTERA CPLD器件的配置与下载,贡献给初学习者,非长有用.3. This design package includes reference materials for creating a USB - PS/2 combination mouse that a.4. 字符表示的十六进制数转化为相应的整数    错误则返回    -1   .5. C51的12864m.6. 8个字LED点阵的显示程序.7. 51+ch375超级经典的U盘读写程序嘿嘿赶快下载把.8. PWM控制电机C程序-已通过实验测试 PWM控制精确控制电机的转动..9. C51串口单工通讯程序一成功通过测试,请放心下载.10. 来自网上好心人的好东东,关于SD卡读写的,内附protel原理图.11. 设计输入 ! 多种设计输入方法 – Quartus II • 原理图式图形设计输入 • 文本编辑 – AHDL, VHDL, Verilog • 内存编辑 .12. 全是FPGA的例子 对大家应该有好处 大家赶快下把 知识不等人.13. 此为编程代码示例.14. 此为编程代码示例.15. 我在spartan-3e starter kit 的板上实现了mc8051.16. 完成MP3播放功能.17. 一个关于实时时钟驱动方面的程序(ARM7).18. 遍历二叉树的4个非递归算法 vc编程基础.19. 快速排序的非递归算法 vc编程练习.20. 雷达高频接收机.21. 我的开发板的所有测试程序.22. ps2的驱动.23. 密度测试仪的源码.24. 本程序主要内容18b20+s52+uart单点测温详细c51程序.25. CPLD 9536 程序 我自己用的代码. VHDL语言.26. AMD嵌入式处理器AU1200开发板原理图.27. cpld3128开发板的原理图 很有用,已经做成PCB,需要的话可以联系我.28. ertfs文件系统里面既有完整ucos程序.29. 基于atmega128的交通信号灯控制程序.30. 利用软件编写的I2C传输界面程序,适用于现有4位机等汇编语言中!.31. I2C控制程序,供大家学习参考,使用时根据自己的系统修改..32. This designs uses a Nios II system to demonstrate how to read from the SD card. The software reads W.33. his design is the initial design when the board is powered-up. It increments a counter and displays.34. 用于多于9个串口的ce驱动程序。时间仓促。可以参考.35. CSD卡的dos驱动程序源码.36. ADT700的小程序.37. 嵌入式的小程序.38. 基于cpld的hdb3编码器 基于cpld的hdb3编码器.39. 基于cpld的交通灯设计 ?赾pld的交通灯设计.40. 用于ARM9系列的S3C2440A的bootloader,Linux平台.

    标签: 固件

    上传时间: 2013-04-15

    上传用户:eeworm

  • VIP专区-嵌入式/单片机编程源码精选合集系列(157)

    VIP专区-嵌入式/单片机编程源码精选合集系列(157)资源包含以下内容:1. 嵌入式486手册.2. 奔腾-486处理器指令集手册.3. 1602液晶显示程序+1302温度测量+18b20显示时间(C语言).4. 51写的SLE4442程序实验用的SLE4442卡初始密码PSC1、PSC2、PSC3均为0FFH.5. 语音芯片的驱动程序.6. 嵌入式平台入门--嵌入式系统内存泄漏的检查和预防.7. 从PCI一直讲到PCI EXPRESS的文章.8. 基于TMS320F2812的工控实时时钟.9. 新代数控系统.10. S3C2442 官方 原理图 网上收集的一份原理图!.11. 高级数据链路控制(HDLC)协议的介绍文档.12. ARMSYS实验二十四:FAT16文件系统的移植与应用 描述:对Nandflash进行格式化.13. pxa270 的bootloader源码.14. ds1302源程序 (为辅试验箱调试通过).15. FPGA开发板的原理图很详细的.16. HT单片机模拟I2C通讯.17. easy web build on NXP LPC2300 LPc2400.18. 蓝牙耳机的SCH,与PCB图,可适合于自己动手的朋友们进行创作..19. ti的12位AD采集c实现.20. wince 下测试串口.21. 本系列所采用的所有技术都将“以实例来定义”.22. 用运算放大器做正弦波振荡器在学校时老师就教过.23. FPGA/CPLD数字电路设计经验分享。大唐公司的!.24. NorFlash的烧写及相关说明可以通过串口实现程序的在线升级.25. 嵌入式操作系统实时性比对与评价,尤其对windowsce性能的测试大有帮助。.26. 东芯IV的SEP3203ARM的源代码.27. 1702的资料.28. 数字逻辑交通信号灯课程设计代码请指正.29. C#程序开发范例宝典 图书光盘附带源码 第20章.30. 介绍了嵌入式linux操作系统的知识以及arm编程.31. P,PI D控制系统仿真设计的例子.32. 32位元2進位SIGNED乘法器32位元SIGNED乘法器.33. 用8051单片机和6个数码管加一片DS1302时钟芯片做成实用闹钟.34. UP-NETARM 2410-S 开发平台 电路原理图.35. 通过时钟芯片计算按键开关闭合次数和时间.36. 通过对双口ram 操作判断硬件正确性.37. Nokia 3310 驱动程序 ... KeilC.38. MPC03-LV运动控制卡驱动程序.39. 一个51整开发板的应用(源程序电路图功能全实用给有需要的人).40. I2C : 用C语言编译的I2C.

    标签: 光学 温度变送器

    上传时间: 2013-07-21

    上传用户:eeworm