虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

SO-called

  • 微处理器dsPIC33F在微机保护装置中的应用

    数字信号处理器dsPIC33F集多通道高精度A/D转换、多通讯模式、看门狗、CMOS Flash技术等于一体,其内部可完成所有数据操作,实现总线不出芯片技术。将该处理器应用于微机保护装置,提出基于dsPIC33F微处理器的微机保护装置的设计方案,给出相应的接口电路与软件流程。该设计方案结构简单,性价比及可靠性高,开发周期短,具有一定的实用推广价值。所研制的微机保护装置现场运行效果良好。 Abstract:  The dsPIC33F microprocessor has a plentiful interior resource which contains multi-channel,high precision A/D converters,multi-communication module,watchdog,CMOS Flash technology,and so on.All data manipulations is accomplished interiorly.What is more,it makes the technology that bus does not go beyond the chip comes into practice.The paper put forwards a design scheme based on dsPIC33F microprocessor.The scheme has the advantages of simple structure,high reliability and shortened exploitation cycle.What is more,it has definite practicality and reference.The microcomputer protection device has been put into operation with excellent effects.

    标签: dsPIC 33F 33 微处理器

    上传时间: 2013-11-16

    上传用户:开怀常笑

  • 基于ATmega16的简易示波器设计

    介绍了以AVR单片机ATmega16为核心,采用前端信号调理电路、程控增益放大器以及波形显示LCD(GDM12864A)实现的一个简易示波器。并给出该系统设计的硬件和软件设计方案。 Abstract:  Abstract:This paper introduces an easy digital storage oscilloscope based on the AVR microcontroller ATmega16,especially emphasizes on the software design and the hardware design which contains signal processing circuit,gain-programmed amplifier circuit and LCD’s interface circuit and so on.

    标签: ATmega 16 简易示波器

    上传时间: 2013-10-13

    上传用户:ccccccc

  • 基于MS5534B的微功耗气压数据采集

    气压是气象监测中的一个重要参数,提出了一种气压数据采集模块设计方案,该模块采用数字气压传感器MS5534B、MSP430单片机MSP430F2272和带实时时钟(RTC)64 KB铁电存储器。通过低功耗软件设计方法以微安级整体平均功耗实现了气压数据的采集和存储,适合电池供电的连续高精度气压采集应用。给出了模块的软硬件设计以及MS5534B的性能指标和使用经验。 Abstract:  Air pressure is an important parameter in weather monitor.This paper futs forward a new design scheme of low power-air pressure data acquisition module.The module uses a digital output barometer sensor MS5534B,MSP430 microcontroller MSP430F2272 and integrated RTC 64KB FRAM,precision air pressure measurement and storage chip.Another point of this module is low power consumption, so it is well suited for battery powered air pressure data acquisition applications. At the same time,the software and hardware deign of module is presented,And the speciaties and use notices of MS5534B are given.

    标签: 5534B 5534 MS 微功耗

    上传时间: 2014-12-27

    上传用户:drink!

  • 基于P87LPC764单片机的延时漏电继电器设计

    介绍以P87LPC764型单片机为核心的延时型漏电继电器设计方案。该方案可供用户选择实现额定动作电流和5倍额定动作电流下不同的延时动作时间,并有重合闸设定选择功能。解决了以往传统分立元件带来的延时时间离散性大且不易实现的弊端。 Abstract:  In this paper, the delay leakage relay based on P87LPC764 is introduced in detail. This system provides different relay times at rating current and 5× rating current for users and also offers superposition brake set selection function. So that it resolves many traditional problems.

    标签: P87 764 LPC 87

    上传时间: 2013-11-08

    上传用户:zhaiye

  • 基于MSP430F149的无线环境监测传感器系统设计

    为了提高环境参数采集的自动化水平,提升效率,设计了无线传感器系统。本系统运用了传感器技术、通信技术和单片机技术,实现了对环境温度、湿度、光照度以及可燃性气体浓度等参数的检测。它能够实时地与上位机进行无线通信,满足对环境参数实时监测的要求。 Abstract:  In order to increase the degree of automation and improve the efficiency of the environment monitoring parameters,the wireless sensor system was developed.Combining with the technique of sensor,automatic monitoring,communication and single-chip microcomputer,it realized real-time monitoring environment parameters,such as temperature,humidity,illumination,concentration of com- bustible gas and so on.At the same time it can communicate with upper personal computers,satisfy the desire of real-time monitoring.

    标签: 430F F149 MSP 430

    上传时间: 2013-11-22

    上传用户:longlong12345678

  • 基于C8051F930的管道温度压力远程监测系统

       为解决输油管道温度压力参数实时监测的问题,设计了以C8051F930单片机作为控制核心的超低功耗输油管道温度压力远程监测系统。现场仪表使用高精度电桥采集数据,通过433 MHz短距离无线通信网络与远程终端RTU进行通信,RTU通过GPRS网络与PC上位机进行远程数据传输,在上位机中实现数据存储和图形化界面显示,从而实现输油管道温度压力参数的实时监测和异常报警。经实验证明,该系统的12位数据采集精度满足设计要求,漏码率小于1%,正常工作时间超过5个月,能实时有效地监测输油管道的温度压力参数,节省大量人工成本,有效预防管道参数异常造成的经济损失和环境污染。 Abstract:  In order to solve the problems on real-time monitoring of pipeline temperature and pressure parameters, the ultra-low power remote pipeline temperature and pressure monitoring system was designed by using the single chip processor C8051F930 as the control core. The high-precision electric bridge was used in field instruments for data collection, the 433MHz short-range wireless communication network was used to make communication between field instrument and RTU, the GPRS was used by the RTU to transmit data to the PC host computer, and the data was stored and displayed in the PC host computer, so the real-time monitoring and exception alerts of pipeline temperature and pressure parameters were achieved. The experiment proves that the system of which error rate is less than 1% over five months working with the 12-bit data acquisition accuracy can effectively monitor the pipeline temperature and pressure parameters in real time, it saves a lot of labor costs and effectively prevents environmental pollution and economic losses caused by abnormal channel parameters.

    标签: C8051F930 温度 压力 远程监测系统

    上传时间: 2013-11-07

    上传用户:cuibaigao

  • 基于msp430单片机的便携式数字倾角仪的研制

    介绍了一种基于MSP430系列单片机和ADXL203加速度传感器的数字式倾角仪,它不仅可以实现水平度检测,而且可以测量00~3600范围内的任意倾角,分辨率可达O.1。。此外,由于该倾角仪输出为数字结果,因此它也可以与其他的数字设备结合起来,组合成一个功能更加强大的仪器。该数字倾角仪可广泛应用于建筑、机械、道路、桥梁、石油、煤矿和地质勘探等各种需要测量重力参考系下倾角的场合。关键词:MSP430F133单片机;力敏传感器;ADXL203加速度计;角度测量 Abstract:This paper presents a new style digital inclinometer which is developed on the basis of the MSP430F133 MCU and the ADXL203 dual axis aeeelerometer.This inclinometer not only can test levelness,but also can measure any angle between 0。and 360。with an accuracy of 0.1 O.In addition,its output is a digital result,which makes it possible to integrate itself with other digital devices to form a more functional unit.This inclinometer can be widely used in any construction site,oil field,coal-mine or geologic survey and SO on where it will provide the working people with convenience to measure any angles.Key words:MSP430F133 MCU;force sensor;ADXL203 accelerometer;angle measurement

    标签: msp 430 单片机 便携式

    上传时间: 2013-11-14

    上传用户:lizhizheng88

  • P87LPC767 OTP 单片机原理

    P87LPC767 OTP 单片机原理 P87LPC767 是20 脚封装的单片机适合于许多要求高集成度低成本的场合可以满足许多方面的性能要求作为Philips 小型封装系列中的一员P87LPC767 提供高速和低速的晶振和RC 振荡方式可编程选择具有较宽的操作电压范围可编程I/O 口线输出模式选择可选择施密特触发输入LED 驱动输出有内部看门狗定时器P87LPC767 采用80C51 加速处理器结构指令执行速度是标准80C51 MCU 的两倍特性􀂑 操作频率为20MHz 时除乘法和除法指令外加速80C51 指令执行时间为300600ns VDD=4.5 5.5V 时时钟频率可达20MHz VDD=2.7 4.5V 时时钟频率最大为10MHz􀂑 4 通道多路8 位A/D 转换器在振荡器频率fosc=20MHz 时转换时间为9.3μs􀂑 用于数字功能时操作电压范围为2.7 6.0V􀂑 4K 字节OTP 程序存储器128 字节的RAM 32Byte 用户代码区可用来存放序列码及设置参数􀂑 2 个16 位定时/计数器每一个定时器均可设置为溢出时触发相应端口输出􀂑 内含 2 个模拟比较器􀂑 全双工通用异步接收/发送器UART 及I2C 通信接口􀂑 八个键盘中断输入另加2 路外部中断输入􀂑 4 个中断优先级􀂑 看门狗定时器利用片内独立振荡器,无需外接元件,看门狗定时器溢出时间有8 种选择􀂑 低电平复位使用片内上电复位时不需要外接元件􀂑 低电压复位选择预设的两种电压之一复位可在掉电时使系统安全关闭也可将其设置为一个中断源􀂑 振荡器失效检测看门狗定时器具有独立的片内振荡器因此它可用于振荡器的失效检测􀂑 可配置的片内振荡器及其频率范围和RC 振荡器选项(用户通过对EPROM 位编程选择) 选择RC 振荡器时不需外接振荡器件􀂑 可编程 I/O 口输出模式准双向口,开漏输出,上拉和只有输入功能可选择施密特触发输入􀂑 所有口线均有20mA 的驱动能力􀂑 可控制口线输出转换速度以降低EMI,输出最小上升时间约为10ns􀂑 最少 15 个I/O 口,选择片内振荡和片内复位时可多达18 个I/O 口􀂑 如果选择片内振荡及复位时,P87LPC767 仅需要连接电源线和地线􀂑 串行 EPROM 编程允许在线编程2 位EPROM 安全码可防止程序被读出􀂑 空闲和掉电两种省电模式提供从掉电模式中唤醒功能低电平中断输入启动运行典型的掉电电流为1μA􀂑 低功耗 4MHz-20MHz,1.7-10mA@3.3v 100KHz-4MHz,0.044-1.7mA@3.3v 20KHz-100KHz,9-44μA@3.3v􀂑 20 脚DIP 和SO 封装

    标签: P87 767 LPC OTP

    上传时间: 2013-11-06

    上传用户:xcy122677

  • CAT25128-128Kb的SPI串行CMOS EEPRO

    The CAT25128 is a 128−Kb Serial CMOS EEPROM device internally organized as 16Kx8 bits. This features a 64−byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAT25128 device. The device featuressoftware and hardware write protection, including partial as well as full array protection.

    标签: 25128 EEPRO CMOS CAT

    上传时间: 2013-11-15

    上传用户:fklinran

  • A Single-Chip Pulsoximeter Des

    This application report discusses the design of non-invasive optical plethysmographyalso called as pulsoximeter using the MSP430FG437 Microcontroller (MCU). Thepulsoximeter consists of a peripheral probe combined with the MCU displaying theoxygen saturation and pulse rate on a LCD glass. The same sensor is used for bothheart-rate detection and pulsoximetering in this application. The probe is placed on aperipheral point of the body such as a finger tip, ear lobe or the nose. The probeincludes two light emitting diodes (LEDs), one in the visible red spectrum (660nm) andthe other in the infrared spectrum (940nm). The percentage of oxygen in the body isworked by measuring the intensity from each frequency of light after it transmitsthrough the body and then calculating the ratio between these two intensities.

    标签: Pulsoximeter Single-Chip Des

    上传时间: 2013-10-27

    上传用户:黑漆漆