Note: Before commissioning the value of the connected mains voltage must be set in the servo controller(factory setting=3×400 V AC). More detailed information see chapter 4"Commissioning".通讯接口所有的Servo-One系列均有USB及TCP/IP通讯接口，可通过LT-I公司的Drive-Manager5软件进行通讯，进行相关参数的读写和现场调试，详情请参考章节.…软件调试。Servo-One Junior:X9（USB1.1）TCP/IP（开发中）Servo-One:X2（USB1.1）X3（TCP/IP）Note: The faults can be acknowledged in accordance with their programmed reaction(ER) or reset via a 24 V-reset(X9/10)(ER.).Attention: Faults marked with a dot can only be reset, after the cause of the fault has been eliminated.显示为当前版本V5.4.0同时，相应的USB接口驱动也在对应的安装文件夹内，例：C:\Program FileLTI DRiVES GmbHILTi DriveManager 5.4.0drivers
标签： servoOne
上传时间： 2022-06-24
上传用户：
This example shows how you can use signal functions in the Visiondebugger to simulate a signal that is coming into One of the analog inputs of the LPC21xx.The Measure example is described in detail in the Getting StartedUser's Guide.The MEASURE example program is available for several targets:Simulator: uVision Simulator for LPC2129MCB2100: Keil MCB2100 evaluation board with ULINK debugger - Application is loaded to internal Flash. - Switch S2 (INT1) is used as GPIO and sampled (jumper positions: J1= off, J7= on) - potentiometer POT1 is sampled as AIN0 (jumper position: J2= on) - serial port COM1 parameters: 9600 baud, no parity, 8-bits, 1 stop bit, flow control nOneMCB2130: Keil MCB2130 evaluation board with ULINK debugger - Application is loaded to internal Flash. - Switch S2 (INT1) is used as GPIO and sampled (jumper positions: J1= off, J7= on) - potentiometer POT1 is sampled as AIN1 (jumper position: J2= on) - serial port COM1 parameters: 9600 baud, no parity, 8-bits, 1 stop bit, flow control nOne
标签： dac8568
上传时间： 2022-06-28
上传用户：
MT2625 DatasheetVersion: 1.2Release date: 31 January 2018NB-IoT transceiver• Compliant with 3GPP R13/R14 NB-IoT standard• Supports DL 200kHz bandwidth/UL single tOne and multi-tOne• Supported RF bands: B1/B2/B3/B5/B8/B11/B12/B13/B17/B18/B19/B20/B21/B25/B26/B28/B31/B66/B70/B71• Supports PSM and eDRX modeMicrocontroller subsystem• ARM® Cortex®-M4 with FPU and MPU• 14 DMA channels• One RTC timer, One 64-bit and five 32-bit general purpose timers• Development support: SWD, JTAG• Crypto engineo AES 128, 192, 256 bitso DES, 3DESo MD5, SHA-1, 224, 256, 384, 512• True random number generator• JTAG password protection
标签： MT2625
上传时间： 2022-07-04
上传用户：
PrefaceDuring the past years, there has been a quickly rising interest in radio access technologies for providingmobile as well as nomadic and fixed services for voice, video, and data. The difference indesign, implementation, and use between telecom and datacom technologies is also becoming moreblurred. One example is cellular technologies from the telecom world being used for broadband dataand wireless LAN from the datacom world being used for voice-over IP.Today, the most widespread radio access technology for mobile communication is digital cellular,with the number of users passing 5 billion by 2010, which is more than half of the world’s population.It has emerged from early deployments of an expensive voice service for a few car-borne users,to today’s widespread use of mobile-communication devices that provide a range of mobile servicesand often include camera, MP3 player, and PDA functions. With this widespread use and increasinginterest in mobile communication, a continuing evolution ahead is foreseen.This book describes LTE, developed in 3GPP (Third Generation Partnership Project) and providingtrue 4G broadband mobile access, starting from the first version in release 8 and through the continuingevolution to release 10, the latest version of LTE. Release 10, also known as LTE-Advanced,is of particular interest as it is the major technology approved by the ITU as fulfilling the IMTAdvancedrequirements. The description in this book is based on LTE release 10 and thus provides acomplete description of the LTE-Advanced radio access from the bottom up.Chapter 1 gives the background to LTE and its evolution, looking also at the different standardsbodies and organizations involved in the process of defining 4G. It also gives a discussion of the reasonsand driving forces behind the evolution.Chapters 2–6 provide a deeper insight into some of the technologies that are part of LTE and itsevolution. Because of its generic nature, these chapters can be used as a background not only for LTEas described in this book, but also for readers who want to understand the technology behind othersystems, such as WCDMA/HSPA, WiMAX, and CDMA2000.Chapters 7–17 constitute the main part of the book. As a start, an introductory technical overviewof LTE is given, where the most important technology compOnents are introduced based onthe generic technologies described in previous chapters. The following chapters provide a detaileddescription of the protocol structure, the downlink and uplink transmission schemes, and the associatedmechanisms for scheduling, retransmission and interference handling. Broadcast operation andrelaying are also described. This is followed by a discussion of the spectrum flexibility and the associated
上传时间： 2022-07-08
上传用户：
Simulation can provide a lot of information about what the system is doing. We canadd the effect of different element, like Encoder resolution, ADC sampling rate, etc and understand how does it affect the system. Another benefit is the possibility to slow down the process, to gain insight on what happens of fast systems or, vice versa, speed up slow process.Because National Instruments is a unique company in the fact the we provide a fullhardware solution couple with a full development platform, we can use this tools in very particular ways For example, it is possible to combine the LabVIEW Control Design and Simulation Module along with the FPGA module to quickly prototype a controller. One of the main benefits of this approach is that there is no need to compile the FPGA code, which allows for a quick algorithm design turnaround and debugging.
标签： pid控制
上传时间： 2022-07-20
上传用户：
STM32 控制LED电骰子电路图及源码由 nRF51822(微控制器)、MPU6500(三軸加速度计、三轴陀螺仪)、WS2812B(One-Wire RGB888 LED) 组成
上传时间： 2022-07-23
上传用户：
A German-Chinese company with almost 100 years experience in automobileelectronics industry·Founded in 2004 Joyson and Preh in 1919·Working since 1988 in the automotive industry·More than 40 years experience in industrial auomationOne of the biggest merger of China and Germany,company in automotive industry,listed in Shanghai(code 600699)Strong worldwide market:·Ningbo/China·Headquarters·Automotive CompOnents Division (Joyson)Bad Neustadt/Deutschland·Electronics Division(Preh)·Automation Division(PIA)
上传时间： 2022-08-09
上传用户：
VIP专区-嵌入式/单片机编程源码精选合集系列（36）资源包含以下内容：1. C51 I2C 驱动程序 含头文件.2. arm芯 ucos 下的开发框架.3. c8051f***的程序源代码.4. 新华龙单片机的flash用法.5. 用C8051F300设计锂离子电池充电器的解决方案.6. c8051f系列单片机 用过采样和求均值提高ADC分辨率.7. C6000指令集 是对C6000指令集的文档.8. VxWorks 编程手册 VxWorks 编程手册.9. proteus 6.7及其破解（绝对好用）.10. iic总线资料.11. 手机游戏礼包包 原理图采用OrCad软件或PowerPCB软件打开 好玩的很 快来试试吧.12. 红外测温计 红外线测温 自动化设计 原理图采用OrCad软件或PowerPCB软件打开 很完美.13. 9智能机器人礼包 智能机器人 单片机实现 功能齐全 运动流畅.14. 哈哈！终于找到了最新版本的UCGUI！ 增加了不少的功能.15. Nios II是一个用户可配置的通用RISC嵌入式处理器,这个文档详细介绍这个处理器的用法.16. 这是一个c语言写的a/d转换程序。利用i2c总线实现对24c02的存和取.17. 学ＤＳＰ时.18. 汉字液晶子程 液晶屏分为4行*12列汉字.19. 这是一个c语言描述的8位led显示的源代码.20. We demonstrate a method for encoding and decoding the [24,12,8] extended binary Golay code using a s.21. Training embedded apps to process speech may be as easy as finding the right 8-bit micro. Don t let.22. The CC1000 RF transceiver is very easy to interface with a microcontroller. The chip is configured.23. One of the most important issues affecting the implementation of microcontroller software deals wi.24. AVR单片机开发中.25. 作基于日立公司superh系列微处理器嵌入式操作系统bootloader源代码.26. touchsceen_test ├─ main.c C语言主源文件 ├─ AscII6x8.c Ascii字符6x8点阵显示格式数据 ├─ lcd.c LCD显示函数源文件 ├─.27. iic_test ├─ main.c C语言主源文件 ├─ iic.c IIC总线操作和24C040擦写函数源文件 └─ iic.h IIC总线操作和24C040写定义头文件.28. Nexperia系统声音实现的源码.29. 89C516RD+的两个AD转换程序,89C51是22.1184MHZ,有64KB Flash 256B(DataRAM)+1024B(Ext.RAM)的性价比很高的MCU.30. 网上收集的VC多线程开发、嵌入式开发文档.31. ucos-2在lpc2100上的移制例子。.32. mcf5307实验源代码.33. CPLD对DUSH的读写控制,LINUX下运行.解压即可..34. HART协议由Rosemount公司开发且已向每个使用者开放HART协议采用标准的Bell 202频移键控信号以1200波特通信以低电平加载于4mA~20mA模拟信号上.35. 中文MODBUS协议（完整版）涵盖协议基本内容。不用我多说了吧！自己看好了。.36. μC_OS-II在Nios上的移植（共同学习ucosII）.37. SST28F040读写源程序,C语言编写,方便移植.38. 基于ARM 的PDA拼音输入法源程序,c语言编写,方便移植.39. Cypress公司的USB芯片开发资料.40. at91 sam 系列arm7单片机程序下工具.
标签： 自动变速器
上传时间： 2013-06-18
上传用户：eeworm
VIP专区-嵌入式/单片机编程源码精选合集系列（64）资源包含以下内容：1. 一个基于LPC21平台的CAN总线接收与发送实现源代码..2. LPC21XX的I2C与SPI部份的通迅实现源代码..3. 基于FPGA的单总线(One-WIRE)协议的实现源代码..4. 用AVR制作的打铃仪的完整程序.5. 基于SPI方式的MMC卡的FAT代码,可修改用于SD卡的管理..6. 51读写nandflash例程(CYPRESS 68013上的一个读写samsung K9F1G的例子程序)..7. 描述；用于MSP430F149。 异步通讯。 从串口接收数据.8. FreeRTOS V4.2.1,增加了AVR32 UC3 和 LPC2368 的支持.9. 电脑主机的PCI电视卡的源代码.10. 一个简单实用的内存管理程序.11. cpia usb摄像头的驱动程序源码。需要video4linux和i2c-core支持.12. MSP430F133驱动液晶的程序.13. ARM9系列,s3c2410实验代码.14. ARM9系列,s3c2410实验代码.15. SC6122红外线解码程序 遥控器解码处理程序.16. 51模拟串口c程序 //但我验证过.17. 这个是９０５的发送主程序刚刚上传的是接收程序很抱歉站长.18. C52继电器实验程序 控制两个继电器轮流闭合.19. C52万用红外遥控器实验程序,重新整理,供参考学习用.20. 扩频原理图用于做扩频通信使用.21. 这个是ATM9200开发板的例子.22. zigbee 飞思卡尔 音频传输 基于ucos的所有源码.23. ALTERA的EP1C12-Q240的原理图,PROTEL99SE格式..24. 双端口RAM的VHDL语言实现。完全在CPLD芯片上测试通过。可以实现对存储器读操作的同时对另外一个空间写操作.25. 基于44B0X的井字棋游戏.26. 用vhdl编写的pci源代码。花了我2000多元钱买来的.27. 资料请大家看看.28. 呵呵 好啊！给大家传写东西 会有用的阿 谢谢！.29. 给大家传一些资料.30. 关于dsp的音频程序.31. 关于dsp的音频程序.32. CPLD(FPGA)的开发与应用.33. 一个sd卡读写的源程序.34. BITEK LCD DRIVER IC OSD CODE.35. BITEK DRIVER IC MENU CODE.36. c8051f020测速.37. Proteus7.1Sp2最新版本破解.38. USB接口的JTAGICE(DIY)文档.39. 如果应用程序在共享 DLL 中使用 MFC.40. 用P1口.
上传时间： 2013-04-15
上传用户：eeworm
VIP专区-嵌入式/单片机编程源码精选合集系列（117）资源包含以下内容：1. (1)可以实时显示当前时间。 (2)可以用键盘设定多个预定打铃时间。 (3)学有余力的同学可以增加语音提示的功能.2. 关于ARM控制鼠标运行的C程序 所用IC为LPC2132等,程序包含接收和发送数据子程序.3. 来自PhysiOnet的心电分析软件WFDB使用指南.4. 单片机接口技术实用子程序配套源代码 内含关于串口通信、键盘控制、液晶显示等功能的源码.5. Boot code for ADM5120 with serial console for Edimax router..6. 论文名字为：多模式自适应嵌入式实时视觉监督。在开发智能监控摄像机时这篇论文会对研究者又帮助。.7. bootloader源代码.8. 汇编的雷达程序代码.9. 这个是51的光电隔离设计。.10. nios ii在电机控制中的应用.11. CPLD控制的数据采集器原理图.12. 关于三星的s3c2410芯片的开发板的原理图.13. 本程序段为mifare One 卡读写程序的子程序 也是关键程序.14. AT89C2051的设计手册。.15. 这个是有关DS12887的资料,超级详细的..解释的很明白.16. s3c44b0 bios起动源程序.17. 一个Megaco实现源代码.18. FPGA的Nios配合时如何计算SDRAM相位的文章.19. This an exercise in using finite state machines.基于ALTERA的DE2开发 平台.20. 嵌入式微处理器系统 崔光佐 普适计算与应用实验室 北京大学现代教育技术中心 www.uclab.org.21. SST39VF160操作子程序.22. 基于51单片机的单工呼叫系统详细源代码程序.23. AT91RM9200测试程序.24. TGLCMLIMIT64A接口程序（模拟方式）.25. Version Management with CVS.26. PSoC(可编程片上系统)是Cypress半导体公司生产的包含有8位微处理器核和数字与模拟混合的信号阵列芯片.27. 你相学会CPLD,FPGA,教程,快速,么,你想使用硬件编程语言么.那就看这个吧,只要5分钟.让你入门.28. S3C2410下LCD驱动程序移植 及GUI程序编写 以一个实例来叙述S3C2410下一个驱动程序的编写（本文的初始化源码以华恒公司提供的s3c2410fb.c为基础）及简单的GUI程序的编写。.29. s3c44b0 的开发板测试的所有源代码及程序！！！汇编代码主要完成系统初始化.30. 周立功实验串口调试! 周立功实验串口调试!.31. 周立功实验SPI调试! 周立功实验SPI调试!.32. 周立功实验SSP调试! 周立功实验SSP调试!.33. 周立功实验定时器调试! 周立功实验定时器调试!.34. 周立功实验PWM调试! 周立功实验PWM调试!.35. PT0611打印机代码,可用于学习用,如果有需要可以下载.36. CyclOne1C20的Nios开发板完整原理图Protel格式.37. 寻迹小车主控程序.38. 语言嵌入式系统编程修炼之道,非常有用的嵌入式开发语言学习.39. 附件为at91sam9261dk评估板原理图,protel99se格式的.40. 51单片机ADS7846适合用在4线制触摸屏.
上传时间： 2013-06-01
上传用户：eeworm
