selects the mux channel and configures the MAX197 for second write pulse, written with ACQMOD = 0, termi- either unipolar or bipolar input range. A write pulse (WR nates acquisition and starts conversion on WR°Os risin + CS) can either start an acquisition interval or initiate a edge (Figure 6). However, if the second control byte combined acquisition plus conversion. The sampling contains ACQMOD = 1, an indefinite acquisition interval interval occurs at the end of the acquisition interval. is restarted. The ACQMOD bit in the input control byte offer
标签： configures the selects channel
上传时间： 2016-12-24
上传用户：朗朗乾坤
selects the mux channel and configures the MAX197 for second write pulse, written with ACQMOD = 0, termi- either unipolar or bipolar input range. A write pulse (WR nates acquisition and starts conversion on WR°Os risin is restarted. The ACQMOD bit in the input control byte offer+ CS) can either start an acquisition interval or initiate a edge (Figure 6). However, if the second control byte combined acquisition plus conversion. The sampling contains ACQMOD = 1, an indefinite acquisition interval interval occurs at the end of the acquisition interval.
标签： configures the selects channel
上传时间： 2016-12-24
上传用户：yzhl1988
k-step ahead predictions determined by simulation of the ％ one-step ahead neural network predictor. For NNARMAX ％ models the residuals are set to zero when calculating the ％ predictions. The predictions are compared to the observed output. ％
标签： ahead predictions determined simulation
上传时间： 2016-12-27
上传用户：busterman
Train a two layer neural network with a recursive prediction error ％ algorithm ("recursive Gauss-Newton"). Also pruned (i.e., not fully ％ connected) networks can be trained. ％ ％ The activation functions can either be linear or tanh. The network ％ architecture is defined by the matrix NetDef , which has of two ％ rows. The first row specifies the hidden layer while the second ％ specifies the output layer.
标签： recursive prediction algorithm Gauss-Ne
上传时间： 2016-12-27
上传用户：ljt101007
通过对于模2除法的研究 可以得到如下方法： 1． 把信息码后面加上p－1位的0，这个试验中p是6位，即在输入的信息码后面加上“00000”。把这个17位的被除数放入input中。 2． 在得到被除数input之后，设计一个在被除数上移动的数据滑块变量d，把input中的最高位开始逐次复制给变量d。 3． 如果d的最高位为1，由变量d和变量p做异或运算；如果d的最高位为0则不运算或者做多余的异或‘0’的运算。 4． 把滑块变量d往后滑动一位。 5． 循环步骤（3，4）11次。 6． 执行步骤3。 7． 得到余数c，把c转成信号输出。
上传时间： 2013-12-28
上传用户：凤临西北
Open Flash Chart is a program for creating charts in Flash to display in Web pages. You can create bar, line, area, and pie charts. It also includes server side classes to help generate the data file used as input. At the moment, there are classes for PHP, Perl, .NET, Java, Ruby (and Rails), and Python
标签： Flash creating display program
上传时间： 2014-01-15
上传用户：fandeshun
本例展示了如何利用外设TIM2来产生四路频率不同的信号。 TIM2时钟设置为36MHz，预分频设置为2，使用输出比较-翻转模式（Output Compare Toggle Mode）。 TIM2计数器时钟可表达为：TIM2 counter clock = TIMxCLK / (Prescaler +1) = 12 MHz 设置TIM2_CCR1寄存器值为32768，则CC1更新频率为TIM2计数器时钟频率除以CCR1寄存器值，为366.2 Hz。因此，TIM2通道1可产生一个频率为183.1 Hz的周期信号。 同理，根据寄存器TIM2_CCR2 、TIM2_CCR3和 TIM2_CCR4的值，TIM2通道2可产生一个频率为366.3 Hz的周期信号；TIM2通道3可产生一个频率为732.4 Hz的周期信号；TIM2通道4可产生一个频率为1464.8 Hz的周期信号。 可以通过示波器观察各路输出
上传时间： 2014-01-22
上传用户：plsee
ECE345, Visual-to-Audio Electronic Travel Aid Code for TM320C54x (v2a.asm) download This project involves the design and implementation of a audio synthesis device that converts moving images into audio signals. The system is built on a TM320C54x DSP with interface to an IMAQ camera module via the serial port on a PC. Brief description: A LabVIEW VI acquires an image from the IMAQ camera module. It quantizes the image into a 5x5, 3-bit image, and sends the data to the TM320C54x DSP via a serial port. The TM320C54x DSP constructs a 64-tap FIR by combining a series of 64-tap head related transfer functions (HRTF) according to the incoming data, and then filters an input audio signal with this FIR filter, in effect creating a correspondence between the filtered signal and the original image.
标签： Visual-to-Audio Electronic download project
上传时间： 2017-02-01
上传用户：笨小孩
MPI stands for the Message Passing Interface. Written by the MPI Forum (a large committee comprising of a cross-section between industry and research representatives), MPI is a standardized API typically used for parallel and/or distributed computing. The MPI standard is comprised of 2 documents: MPI-1 (published in 1994) and MPI-2 (published in 1996). MPI-2 is, for the most part, additions and extensions to the original MPI-1 specification. The MPI-1 and MPI-2 documents can be downloaded from the official MPI Forum web site: http://www.mpi-forum.org/. Open MPI is an open source, freely available implementation of both the MPI-1 and MPI-2 documents. The Open MPI software achieves high performance the Open MPI project is quite receptive to community input.
标签： comprising MPI Interface committee
上传时间： 2013-12-22
上传用户：爺的气质
These are P-Channel enhancement mode silicon gate power fi eld effect transistors. They are advanced power MOSFETs designed, tested, and guaranteed to withstand a specifi ed level of energy in the breakdown avalanche mode of operation. All of these power MOSFETs are designed for applications such as switching regulators, switching converters, motor drivers, relay drivers and drivers for other high-power switching devices. The high input impedance allows these types to be operated directly from integrated circuits.
标签： enhancement transistors P-Channel are
上传时间： 2017-02-17
上传用户：aeiouetla
