虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

Full-state-feedback

  • 半导体制冷温度控制系统的设计研究

    在半导体制冷技术的工作性能及其优缺点研究的基础上,设计了以单片机为核心控制元件,以TEC1-12706为执行元件的半导体制冷温度控制系统。采用高精度分段式PID控制算法配合PWM输出控制的方法实现温度控制;选择数字传感器DS18B20为温度检测元件,还包含1602液晶显示模块、按键调整输入模块和H桥驱动模块等。实际测试表明,该系统结构简单易行,操作方便,工作性能优良,同时针对该系统专门设计的温控算法,使半导体制冷器能更好地适应不同工况而充分发挥其制冷制热工作特性。Based on the study of the performance and advantages and disadvantages of thermoelectric cooler(TEC)technology,a thermoelectric cooling temperature control system with single-chip microcomputer as the core control element and TEC1-12706 as the executive element was designed. High precision piecewise PID control algorithm combined with PWM output control method is adopted to realize temperature control. The digital sensor DS18B20 is selected as the temperature detection element. It also includes 1602 LCD module,key adjustment input module and H bridge drive module. The actual test shows that the system has simple structure,convenient operation and excellent performance. Meanwhile,the temperature control algorithm specially designed for the system can make the semiconductor cooler better adapt to different working conditions and give full play to its refrigeration and heating characteristics.

    标签: 半导体 温度控制系统

    上传时间: 2022-03-27

    上传用户:

  • 基于STC12C5A60S2单片机的LED线阵显示装置

    LED 线阵显示装置, 分为 LED 线性旋转显示主机和图文录入器两部分。主机用直流电机带动由红绿 LED 组成的线阵旋转, 同时线阵按照时序依次切换显示状态, 在固定区域利用视觉暂留效果形成 16×16 点阵, 用以显示图文;图文录入器用 HMI 触控屏作为人机交互界面, 实现图文录入和回放功能。主机与图文录入器通过无线通信方式进行信息交互,可由图文录入器控制主机切换不同工作任务, 以及改变线阵显示内容。The LED linear array display device is divided into two parts:the one is the main unit used to display content,and the other one is used to input the contents.The main unit is driven by a DC motor to rotate the linear array composed by red and green light emitting diodes.At the same time,the 16×16 dot matrix that switching the display state according to the time sequence on the main unit displays pictures and texts in the fixed area,by using the visual temporary effect.The HMI touch screen is used as human machine interface to realize the function that input and playback pictures and texts.The two parts of the device communicate with each other through wireless communication.The image and text input controller can control the main unit to switch different tasks and change the content of linear array displayed.

    标签: stc12c5a60s2 单片机 led

    上传时间: 2022-03-28

    上传用户:jiabin

  • Qi无线充电原理

    近距电能传输——高效安全近距电能传输一般基于电磁感应原理进行。在此技术基础上,当接收器邻近发射器时才会进行电能传输。电磁感应技术的历史长达百年,多年米一直应用于各类电子产品中—如此普及全因其简单、高效以及安全技术概览以下将为你简要介绍无线电能传输技术。System Overview(Communication)Receiver sends messagesTo provide control information to the transmitterBy load modulation on the power signaTransmitter receives messagesTo receive control information frorn the recelverBy de-modulation of the reflected loadPower Pick Up( Receiver)Secondary coil (L Serial resonance capacitor (C) for efficient power transfer Parallel resonance capacitor(C, )for detection purposes Rectifier: full bridge(diode, or switched)+ capacitor Output switch for(dis)connecting the loadReceiver modulates load by Switching modulation resistor(R,n),or Switching modulation capacitor(Ca)Transmitter de-modulates reflected load by Sensing pnmary coil curent (p)and/o Sensing primary coil voltage (V,

    标签: qi 无线充电

    上传时间: 2022-03-31

    上传用户:

  • 蓝牙芯片QCC5144 详细规格书

    高通蓝牙芯片QCC5144 详细规格手册datasheet (共99页)含各个接口说明,应用原理图等信息。 QualcommTrueWireless™ stereo earbuds  (无线双耳) Features(特点) ■ Qualifiedto Bluetooth v5.2 specification  (蓝牙协议标准5.2) ■ 120 MHz Qualcomm ® Kalimba ™ audio DSP  (120MHz 的音频DSP处理器) ■ 32 MHz/80MHz Developer Processor for applications   ■ Firmware Processor for system ■ Flexible QSPI flash programmable platform   (可编程的QSPI外挂存储器) ■ High-performance 24‑bit audio interface       (高性能的24位音频接口) ■ Digital and analog microphone interfaces      (含 数字 及模拟 MIC接口) ■ Flexible PIO controller and LED pins with PWM support ■ Serial interfaces: UART, Bit Serializer (I²C/SPI), USB 2.0   (支持串口,I2C, SPI,USB 接口) ■ Advanced audio algorithms   (高级的音频算法) ■ ActiveNoise Cancellation:        (支持ANC 主动降噪功能) Hybrid, Feedforward, and Feedback modes, using Digital or Analog Mics, enabled using license keys available from Qualcomm® ■ Qualcomm ® aptX ™ and aptX HD Audio  (支持独特的aptx 功能)

    标签: 蓝牙芯片 qcc5144

    上传时间: 2022-04-07

    上传用户:

  • 高通蓝牙芯片QCC3040 详细规格手册datasheet

    高通蓝牙芯片QCC3040 详细规格手册datasheet (共96页)QualcommTrueWireless™ stereo earbuds  (无线双耳)Features(特点)■ Qualifiedto Bluetooth v5.2 specification  (蓝牙协议标准5.2)■ 120 MHz Qualcomm ® Kalimba ™ audio DSP  (120MHz 的音频DSP处理器)■ 32 MHz Developer Processor for applications   (32MH的 应用处理器)■ Firmware Processor for system■ Flexible QSPI flash programmable platform   (可编程的QSPI外挂存储器)■ High-performance 24‑bit audio interface       (高性能的24位音频接口)■ Digital and analog microphone interfaces      (含 数字 及模拟 MIC接口)■ Flexible PIO controller and LED pins with PWM support■ Serial interfaces: UART, Bit Serializer (I²C/SPI), USB 2.0   (支持串口,I2C, SPI,USB 接口)■ Advanced audio algorithms   (高级的音频算法)■ ActiveNoise Cancellation:        (支持ANC 主动降噪功能)Hybrid, Feedforward, and Feedback modes, using Digitalor Analog Mics, enabled using license keys available from Qualcomm®■ Qualcomm ® aptX ™ and aptX HD Audio  (支持独特的aptx 功能)

    标签: 蓝牙芯片 qcc3040

    上传时间: 2022-04-09

    上传用户:slq1234567890

  • 步进电机驱动器原理图+PCB+驱动源码+使用教程等

    该步进电机驱动器又称为EasyDriver,EasyDriver能够为两级步进电机提供大约每相750mA(两极一共1.5A)的驱动。它默认设置为8步细分模式(所以如果你的电机是每圈200步,你使用EasyDriver时默认为每圈1600步),更多细分模式可以通过将MS1或MS2两个接脚接地进行设置。这是一种基于Allegro A3967驱动芯片的细分断路器。对于此设计的完整规格,请查阅A3967的参数表。它的最大每相电流从150mA到750mA。可以采用的最大驱动电压大概是30V,其中包括板载5V的调压器,所以只需要一个电源。质优价廉,这玩意儿只要十几美元,比你自己制作电路板更便宜。步进电机驱动器设计特色:· A3967 Microstepping Driver· MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)· Compatible with 4, 6, and 8 wire stepper motors of any voltage· Adjustable current control from 150mA/phase to 700mA/phase· Power supply range from 6V to 30V. The higher the voltage, the higher the torque at high speeds

    标签: 步进电机 驱动器 pcb 驱动

    上传时间: 2022-04-27

    上传用户:

  • 基于DSP28335+IR2110芯片的移相全桥驱动电路设计

    为解决移相全桥电路驱动及相角控制问题,设计了一种数字控制的移相全桥驱动电路.以TPL521为光耦隔离、IR2110为栅极驱动芯片.由DSP产生PWM信号,经过光耦隔离和逻辑电路后送至IR2110进行相角控制.文章对IR2110驱动电路原理进行分析及参数进行设计,对TMS320F28335进行设置并给出部分代码.实验结果表明:通过TMS320F28335可产生的不同相角的PWM波形,满足了移相全桥对不同相角控制的要求.In order to solve the problem of phase-shifted full-bridge circuit driving and phase angle control,a digitally controlled phaseshifted full-bridge driving circuit was designed. TPL521 optocoupler isolation,IR2110 gate driver chip. PWM signals are generated by the DSP and sent to the IR2110 for phase angle control after optocoupler isolation and logic circuits. This text carries on the analysis to the principle of IR2110 drive circuit and parameter design,set up and give out some code to TMS320F28335. The experimental results show that the PWM waveforms with different phase angles generated by TMS320F28335 can meet the requirements of phase-shifted full-bridge control for different phase angles.

    标签: dsp28335 ir2110 芯片

    上传时间: 2022-05-03

    上传用户:zhanglei193

  • 基于STM32的无刷直流电机控制器硬件电路设计及实验研究

    以STM32F103C8T6为核心,设计了无刷直流电机控制器硬件电路。电路主要包括IR2310构成的PWM驱动电路、IRF3808构成的逆变电路、增量式旋转编码构成的速度反馈电路。控制器具有CAN和RS232通信接口,可与计算机或PLC构成速度或位置伺服系统。利用由xPC目标搭建的半实物仿真平台对PI参数进行整定。测试了控制器的速度伺服响应性能,给定速度为2400rpm时,控制器响应时间为0.32s。实验结果表明,系统工作可靠,稳定性好,响应速度快,可以满足上肢康复机器人的机械臂速度控制性能要求。The hardware circuit of Brushless DC motor controller is designed by taking STM32F103C8T6 as the core,which mainly includes PWM driving circuits made up of IR2310,inverter circuit formed by IRF3808,speed feedback circuit composed of incremental rotary encoder and so on.Speed servo control system or position servo control system can be composed of BLDM controller with computer or PLC through CAN communication interface or RS232 serial communication interface.By using the hardware in the loop simulation platform built by xPC target,the PI parameters are set up.The Speed servo response performance of the controller is tested.When the speed is 2 400 rpm,the response time of the controller is 0...

    标签: stm32 无刷直流电机

    上传时间: 2022-05-07

    上传用户:

  • 基于DSP28035的高速永磁无刷直流电机驱动系统

    基于DSP28035的高速永磁无刷直流电机驱动系统,包括论文和软硬设计资料。摘要参赛作品为基于DSP28035的高速永磁无刷直流电机驱动系统。该系统以一台额定转速60 krpm的高速永磁无刷直流电机、交错并联的Buck电路以及全桥电路为硬件平台,以DSP28035为控制核心,实现了调压调速功能和基于坐标变换的无位置传感器新技术。为实现该系统要求,本作品充分利用了DSP28035的资源例如:CLA模块,模拟比较器、HPWM模块以及AD转换模块等。AbstractThis work is the drive system for a high speed permanent magnet burshless dc motor based on DSP28035. The hardware platform consists of a BLDC motor(rated speed is 60000rpm), a Buck circuit and an inverter. Under the control of DSP28035, this system can achieve the goal of adjusting the motor’s speed with voltage and the function of sensorless control based on the coordinate transformation. By making full use of resources of the core, such as CLA, analog comparator, HPWM and AD converters, the whole system can meet the requirements.1 引言高速永磁无刷直流电机驱动系统由于基波频率较高(一般在1kHZ以上),利用逆变桥斩波进行调速的控制方式通常会受到开关管开关频率的限制,因此该系统多采用三相全桥前级加Buck电路进承担调压调速的功能,而三相全桥主要承担逻辑换相的功能。然而,传统Buck电路所需电感的体积较大,增加了系统的体积,降低了系统的功率密度。

    标签: dsp28035 直流电机

    上传时间: 2022-05-08

    上传用户:bluedrops

  • CMSIS—DAP下载器源码 在STM32F103C8T6上实现

    说明:  CMSIS—DAP下载器源码,在STM32F103C8T6上实现,支持cortex全系单片机下载调试(CMSIS-DAP downloader source code, implemented on STM32F103C8T6, support cortex full-system MCU download and debug)

    标签: tm32f1 CMSIS-DAP

    上传时间: 2022-05-17

    上传用户:kingwide