虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

通信节点

  • 基于OPNET的地域通信网网络仿真研究

    针对无线通信情况下地域通信网中心交换机节点间的通信质量,采用模块化的方法描述节点对象的行为并对节点进行建模,通过OPNET网络仿真工具对地域通信网各网络节点的仿真模型以及组成各节点的进程模块进行设计实现,结合地域通信网的一个实例,得出了节点受不同干扰情况下的全局数据业务丢包率和话音业务呼损率。

    标签: OPNET 通信网 网络 仿真研究

    上传时间: 2013-10-30

    上传用户:chenbhdt

  • 基于SOPC技术的异步串行通信IP核的设计

    介绍了SoPC(System on a Programmable Chip)系统的概念和特点,给出了基于PLB总线的异步串行通信(UART)IP核的硬件设计和实现。通过将设计好的UART IP核集成到SoPC系统中加以验证,证明了所设计的UART IP核可以正常工作。该设计方案为其他基于SoPC系统IP核的开发提供了一定的参考。

    标签: SOPC IP核 异步串行通信

    上传时间: 2013-11-12

    上传用户:894448095

  • STTC码在QPSK通信系统中的应用与仿真

    在无线通信中为了有效抑制噪音积累,选用QPSK调制,因为QPSK调制比QAM更适合噪音环境,QPSK调制具有理想的误差保护。网格空时码在QPSK调制传输系统中具有更好的纠错能力,具有低误码率与误帧率的优良性能。

    标签: STTC QPSK 通信系统 中的应用

    上传时间: 2013-11-12

    上传用户:天涯

  • MIMO无线通信系统信道研究

    近几年来,多输入多输出(MIMO)技术为无线通信带来了巨大的信道容量提升,同时它也开始从纯理论性能分析研究转向到无线通信市场的实际商业应用中。但是很多基于MIMO的相关技术仍没有在实际的信道传输条件下得到真正地验证,也即它们仍处于融合实际应用的初始阶段。所以在无线通信中建立一个准确且易处理的MIMO信道模型显得十分重要。

    标签: MIMO 无线通信系统 信道

    上传时间: 2013-11-17

    上传用户:lyson

  • 基于变换域通信的OFDM系统窄带干扰抑制方法

    为解决宽带OFDM系统易受传统窄带信号干扰的问题,采用基于变换域通信(TDC)的OFDM系统,通过在变换域中的电磁环境采样结果,对OFDM信号进行设计,避免使用受干扰频谱传送信息。

    标签: OFDM 变换域 通信

    上传时间: 2013-11-12

    上传用户:sevenbestfei

  • 卫星通信用低噪声放大器的研制

      本文介绍了卫星通信低噪声放大器的基本原理,并结合实例对低噪声放大器的设计方法、步骤进行了探讨。

    标签: 卫星通信 低噪声放大器

    上传时间: 2013-10-23

    上传用户:1421706030

  • 量子密码通信论文

    量子密钥分配是密码学与量子力学相结合的产物,它是以量子态为信息载体,利用量子力学的一些原理来传输和保护信息。通常把通信双方以量子态为信息载体,利用量子力学原理,通过量子信道传输,在保密通信双方之间建立共享密钥的方法,称为量子密钥分配,其安全性是由量子力学中的“海森堡测不准关系”(测不准原理)及“量子不可复制定理”(非克隆定理)或纠缠粒子的相干性和非定域性等量子特性来保证的。量子密钥分配不是用于传输密文,而是用于建立、传输密码本,即在保密通信双方分配密钥,俗称量子密码通信。

    标签: 量子密码通信 论文

    上传时间: 2013-11-06

    上传用户:竺羽翎2222

  • ZigBee无线传感网络的路由协议研究

     为满足无线网络技术具有低功耗、节点体积小、网络容量大、网络传输可靠等技术要求,设计了一种以MSP430单片机和CC2420射频收发器组成的无线传感节点。通过分析其节点组成,提出了ZigBee技术中的几种网络拓扑形式,并研究了ZigBee路由算法。针对不同的传输要求形式选用不同的网络拓扑形式可以尽大可能地减少系统成本。同时针对不同网络选用正确的ZigBee路由算法有效地减少了网络能量消耗,提高了系统的可靠性。应用试验表明,采用ZigBee方式通信可以提高传输速率且覆盖范围大,与传统的有线通信方式相比可以节约40%左右的成本。 Abstract:  To improve the proposed technical requirements such as low-ower, small nodes, large capacity and reliable network transmission, wireless sensor nodes based on MSP430 MCU and CC2420 RF transceiver were designed. This paper provided network topology of ZigBee technology by analysing the component of the nodes and researched ZigBee routing algorithm. Aiming at different requirements of transmission mode to choose the different network topologies form can most likely reduce the system cost. And aiming at different network to choose the correct ZigBee routing algorithm can effectively reduced the network energy consumption and improved the reliability of the system. Results show that the communication which used ZigBee mode can improve the transmission rate, cover more area and reduce 40% cost compared with traditional wired communications mode.

    标签: ZigBee 无线传感网络 协议研究 路由

    上传时间: 2013-10-09

    上传用户:robter

  • 基于塑料光纤的高压隔离通信接口设计

     通过比较各种隔离数字通信的特点和应用范围,指出塑料光纤在隔离数字通信中的优势。使用已经标准化的TOSLINK接口,有利于节省硬件开发成本和简化设计难度。给出了塑料光纤的硬件驱动电路,说明设计过程中的注意事项,对光收发模块的电压特性和频率特性进行全面试验,并给出SPI口使用塑料光纤隔离通信的典型应用电路图。试验结果表明,该设计可为电力现场、电力电子及仪器仪表的设计提供参考。 Abstract:  y comparing characteristics and applications area of various isolated digital communications, this article indicates advantages of plastic optical fiber in isolated digital communications. Using the standardized TOSLINK interface, it helps to control costs and difficulty in hardware development and design. Then it gives the hardware driver circuit of plastic optical fiber module, explains the noticed details in design process, gives results on the basis of the optical transceiver module voltage characteristics and frequency characteristics tests. Finally,it gives typical application circuit of the SPI communication port by using plastic optical fiber isolation .The results show that this design can be referenced for the power field, power electronics and instrumentation design.

    标签: 塑料光纤 高压隔离 通信 接口设计

    上传时间: 2014-01-10

    上传用户:gundan

  • 快速跳频通信系统同步技术研究

    同步技术是跳频通信系统的关键技术之一,尤其是在快速跳频通信系统中,常规跳频通信通过同步字头携带相关码的方法来实现同步,但对于快跳频来说,由于是一跳或者多跳传输一个调制符号,难以携带相关码。对此引入双跳频图案方法,提出了一种适用于快速跳频通信系统的同步方案。采用短码携带同步信息,克服了快速跳频难以携带相关码的困难。分析了同步性能,仿真结果表明该方案同步时间短、虚警概率低、捕获概率高,同步性能可靠。 Abstract:  Synchronization is one of the key techniques to frequency-hopping communication system, especially in the fast frequency hopping communication system. In conventional frequency hopping communication systems, synchronization can be achieved by synchronization-head which can be used to carry the synchronization information, but for the fast frequency hopping, Because modulation symbol is transmitted by per hop or multi-hop, it is difficult to carry the correlation code. For the limitation of fast frequency hopping in carrying correlation code, a fast frequency-hopping synchronization scheme with two hopping patterns is proposed. The synchronization information is carried by short code, which overcomes the difficulty of correlation code transmission in fast frequency-hopping. The performance of the scheme is analyzed, and simulation results show that the scheme has the advantages of shorter synchronization time, lower probability of false alarm, higher probability of capture and more reliable of synchronization.

    标签: 快速跳频 同步技术 通信系统

    上传时间: 2013-11-23

    上传用户:mpquest