虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

测量电容

  • 利用过采样技术提高ADC测量分辨率

    提出了用“过采样”技术使在有用的测量频带内的信噪比得到改善, 从而提高ADC 测量的分辨率。并利用Matlab 对其结论进行仿真, 且在TMS320L F2407 DSP 上予以实现,结果表明信噪比和测量分辨率明显提高。

    标签: ADC 过采样 测量 分辨率

    上传时间: 2013-11-20

    上传用户:fairy0212

  • 单片机温度测量DS18b02论文

    18B20温度测量

    标签: 18b b02 DS 18

    上传时间: 2013-10-19

    上传用户:guanhuihong

  • MSP430实现PCB的电容式接触传感

    这个应用报告讨论了如何用MSP430微处理器来设计单接触电容传感器接口的问题。采用具有超低功耗特性和集成外围设备的MSP430,单接触用户接口可以很轻松地实现。这个应用报告提供了技术概述,系统关注的细节和使用MSP430系列进行电容传感器设计不同方法的技术细节。

    标签: MSP 430 PCB 电容式

    上传时间: 2013-11-03

    上传用户:sjy1991

  • 基于P89V51RD2的功率因数测量仪设计

    设计一种基于P89V51RD2的功率因数测量仪,采用光电隔离器和专用数码管驱动器。该测量仪是以增强型单片机P89V51RD2为核心,大大简化系统硬件设计。而软件部分采用模块化设计思想,采用中值滤波和小数补偿算法,实现功率因数的高精度测量。实验测试表明,该功率因数测量仪测量精度高,运行稳定可靠。 Abstract:  A power-factor measurement instrument based on P89V51RD2is designed,which uses optical coupler and specific LED drive chip.The power factor measurement instrument uses P89V51RD2as a core of which greatly simplifies the system design.Furthermore,modularization software is developed in detail.The high precision power-factor measuring system is realized by the center value filter and fractional compensation algorithm.Experiments manifests that the power- factor measurement instrument is high precision,steady and reliable.

    标签: P89 89V V51 RD2

    上传时间: 2014-12-27

    上传用户:CHINA526

  • 基于C8051F020单片机的多路压力测量仪

    介绍了一种基于C8051F020单片机的多路压力测量仪。该测量仪选用电阻应变式压力传感器采集压力信号,并经放大电路处理后送入C8051F020单片机,再由C8051F020单片机内部的A/D转换器将采集到的压力信号进行模数转化,然后分别对数据进行存储和显示。该测量仪能测量6路压力信号,并且各测量点都能单独检测和设置。由于采用了C8051F020单片机,简化了硬件电路,增强了抗干扰能力,使得测量仪具有测量精度高,冲击小等特点。 Abstract:  A measurement apparatus for multi-channel pressure based on single chip microcomputer is introduced.It can measure 6 channels signal of the pressure,and the pressure measure points can be detection and located individually.The pressure signal sampling is obtained by resistor stress-type pressure sensors,the digital signals of 6 channels are collected through amplifying and adjustment circuit of pressure signals and internal integrated A/D converter of MCU.Finally,and it realizes the function to store and display data separately.C8051F020 was used to made hardware circuit simple,and it also enhanced the anti-interference ability.It features high precision and little impact.

    标签: C8051F020 单片机 多路 压力

    上传时间: 2013-11-16

    上传用户:yare

  • 基于单总线器件DS18B20的温度测量仪

    针对目前采用的热敏电阻测量方法,提出了采用单总线数字式温度传感器DS18B20和单片机组成的新型温度测量仪。介绍DS18B20的结构和工作原理,以及单总线工作原理,给出了由Mega8单片机和DS18B20构成的单总线温度测量仪的硬件电路及软件流程图。经试验基于单总线器件DS18B20的温度测量仪,具有测量准确、测温范围宽、体积小、控制方便等优点。 Abstract:  This paper brings forward a new temperature meter composed of 1-Wire temperature sensor DS18B20 and MCU which has advantage of the thermistor. In the article, the DS18B20's structure and controlling principles are introduced and hardware circuit and software diagram of the temperature meter are given.After been tested,the temperature meter has the advantages of accurate measurement, wide temperature range, small volume and convenient controlling.

    标签: 18B B20 DS 18

    上传时间: 2013-10-31

    上传用户:hzy5825468

  • MSP430在频率测量系统中的应用

       介绍一种以MSP430单片机为基础的智能频率测量系统,采用硬件逻辑与软件指令相结合的方式控制闸门,实现0 MHz~10 MHz范围内无档切换的等精度测量。 Abstract:  An intelligent frequency measurement system based on MSP430 singlechip is introduced. The system uses a way that can combine hardware logic and software instructions to contronl the strobe ,and completes the functions of equal precision in the range of 0MHz~10MHz without shifting

    标签: MSP 430 频率测量

    上传时间: 2013-10-28

    上传用户:dbs012280

  • 激光扫描车身坐标测量数据采集系统的设计

    本文对激光扫描车身坐标测量系统的数据采集部分进行了深入研究,设计了基于“AVR+FIFO+CPLD”的数据采集及处理模块;解决了当多路信号有数据同时传输时,如何将数据完整地写入FIFO的问题,实现了数据的有效采集;编写了完整的CPLD控制程序和AVR数据采集程序,为准确测量待测点的坐标提供了可靠的数据来源。

    标签: 激光扫描 坐标测量 数据采集系统 车身

    上传时间: 2013-10-29

    上传用户:asaqq

  • 基于AT89S51的数控机床光栅尺位移测量系统

    介绍了应用51单片机开发设计光栅尺位移测量系统的电路思路及软件设计方法。应用光栅位移传感器和辨向电路的设计原理,开发设计了一套在线测量位移装置,该装置测量精度可达到+-0.1MM,实现了在机床加工过程中实时检测工件尺寸

    标签: 89S S51 AT 89

    上传时间: 2013-11-23

    上传用户:wushengwu

  • 用C51实现无功补偿中电容组循环投切的算法

    介绍了用单片机C 语言实现无功补偿中电容组循环投切的基本原理和算法,并举例说明。关键词:循环投切;C51;无功补偿中图分类号: TM76 文献标识码: BAbstract: This paper introduces the aplication of C51 in the controlling of capacitorsuits cycle powered to be on and off in reactive compensation.it illustrate thefondamental principle and algorithm with example.Key words: cycle powered to be on and off; C51; reactive compensation 为提高功率因数,往往采用补偿电容的方法来实现。而电容器的容量是由实时功率因数与标准值进行比较来决定的,实时功率因数小于标准值时,需投入电容组,实时功率因数大于标准值时,则需切除电容组。投切方式的不合理,会对电容器造成损坏,现有的控制器多采用“顺序投切”方式,在这种投切方式下排序在前的电容器组,先投后切;而后面的却后投先切。这不仅使处于前面的电容组经常处于运行状态,积累热量不易散失,影响其使用寿命,而且使后面的投切开关经常动作,同样减少寿命。合理的投切方式应为“循环投切”。这种投切方式使先投入的运行的电容组先退出,后投的后切除,从而使各组电容及投切开关使用机率均等,降低了电容组的平均运行温度,减少了投切开关的动作次数,延长了其使用寿命。

    标签: C51 无功补偿 循环 电容

    上传时间: 2014-12-27

    上传用户:hopy