随着科技的发展及工业现代化，环境污染是当前国际性问题。蓄电池是人类研制出的性能优异的储能设备，还有IT产品的大量应用。市场上对蓄电的需求量越来越大。而每个厂家的产品质量不同，需要对电池的循环寿命进行检测。本课题设计了基于TMS320F2812 的DSP芯片为控制中心，由高性能的A/D转换器TLC2543和D/A转换器MAX538等构成的蓄电池循环寿命检测系统。同时易于计算机相连，形成一个自动的检测网络。而且按相关的标准进行放电，研究发现取得了很好的效果。
上传时间： 2014-12-24
上传用户：tianming222
Abstract: The DS1875 features a pulse-width modulation (PWM) controller that can be used to control aDC-DC converter. The DC-DC converter can then be used to generate the high bias voltages necessaryfor avalanche photodiodes (APDs). This application note describes the operation of a boost converterthat uses the DS1875. Discussion covers the selection of the inductor and switching frequency, and theselection of components that improve the efficiency of the converter. Test data are presented.
上传时间： 2013-10-26
上传用户：lyson
文中提出了一种应用于印刷电路板的新颖二维电磁带隙（MS-EBG）结构,其单位晶格由折线缝隙组合与正方形贴片桥接构成,以抑制同步开关噪声。结果表明,抑制深度为-30 dB时,与传统L-bridged EBG结构比较,新EBG结构的阻带宽度增加1.3 GHz,相对带宽提高了约10%,能够有效抑制0.6～5.9 GHz的同步开关噪声。
上传时间： 2013-11-07
上传用户：qimingxing130
描述了一种简易的交流数字电压表的系统设计。系统以MSP430F448为核心，该单片机内部集成了12位的A/D转换器，转换器带有内部参考源、采样保持、自动扫描特性，极大地简化了硬件设计。
上传时间： 2014-12-22
上传用户：cuibaigao
The LT®1943 is a highly integrated, 4-output regulatordesigned to power large TFT LCD panels. The LT1943employs switching regulators—instead of linear regulators—to minimize power dissipation and accommodate awide input voltage range. The wide input range, 4.5V to22V, allows it to accept a variety of power sources,including the commonly used 5V, 12V and 19V AC adaptors.
上传时间： 2013-10-19
上传用户：yuhaihua_tony
便携式电子器件(如智能手机、GPS导航系统和平板电脑)的电源可以来自低压太阳能电池板、电池或AC/DC电源。电池供电系统通常将电池串联叠置以实现更高的电压，但由于空间不足，此技术未必总是可行。开关转换器使用电感的磁场来交替地存储电能，并以不同电压释放至负载。因为损耗很低，所以开关转换器是个不错的高效率选择。连接至转换器输出端的电容可减少输出电压纹波。升压转换器提供较高的输出电压；而应用笔记AN-1125(如何运用DC-DC降压调节器)所讨论的降压转换器则提供较低的输出电压。内置FET作为开关的开关转换器称为开关调节器，需要外部FET的开关转换器则称为开关控制器。
上传时间： 2013-11-04
上传用户：edisonfather
Easy-to-use and compact point-of-load power suppliesare necessary in systems with widely distributed, highcurrent, low voltage loads. The LTC®3415 provides acompact, simple and versatile solution. It includes a pairof integrated complementary power MOSFETs (32mΩtop and 25mΩ bottom) and requires no external senseresistor. A complete design requires an inductor andinput/output capacitors, and that’s it. The result is a fast,constant frequency, 7A current mode DC/DC switchingregulator.
上传时间： 2013-10-18
上传用户：avensy
Low power standby requirements are typically associatedwith battery-powered systems. Automotive systems,for example, commonly require power supplies tomaintain output voltage regulation even under no-loadconditions—while drawing minimal quiescent current topreserve battery life. Rising energy costs, however, haveextended the need for low current standby operation toline-powered systems, such as small plugged-in appliancesfor home and business.
上传时间： 2013-11-20
上传用户：xinyuzhiqiwuwu
A number of conventional solutions have been available forthe design of a DC/DC converter where the output voltageis within the input voltage range—a common scenarioin Li-Ion battery-powered applications—but none werevery attractive until now. Conventional topologies, suchas SEPIC or boost followed by buck, have numerousdisadvantages, including low effi ciency, complex magnetics,polarity inversion and/or circuit complexity/cost. TheLTC®3785 buck-boost controller yields a simple, effi cient,low parts-count, single-converter solution that is easyto implement, thus avoiding the drawbacks associatedwith traditional solutions.
上传时间： 2013-10-21
上传用户：ljt101007
Typical industrial and automotive applications requiremultiple high current, low voltage power supply solutionsto drive everything from disc drives to microprocessors.For many of these applications, particularly thosethat have size constraints, the LT3501® dual step-downconverter is an attractive solution because it’s compactand inexpensive compared to a 2-chip solution. The dualconverter accommodates a 3V to 25V input voltage rangeand is capable of supplying up to 3A per channel. Thecircuit in Figure 1 produces 3.3V and 1.8V.
上传时间： 2014-12-24
上传用户：372825274
