虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

无线视频<b>监控</b>系统

  • 基于AVR单片机的安全工具监控系统设计

    基于对相关电力企业安全工器具的调研,针对现有的对安全工器具的管理比较落后,从而导致难以对安全工器具进行有效监控的问题,提出了一种简单有效、容易实施的安全工器具监控方案。首先从整体上描述了安全工器具监控系统的总体结构,然后分别从硬件设计和软件设计两个方面对系统进行了详细阐述。该系统已经成功运用于某电力企业的安全工器具监控,运行稳定,达到了设计的预期目的。

    标签: AVR 单片机 监控 系统设计

    上传时间: 2013-11-05

    上传用户:blacklee

  • 基于AVR单片机的直流电源监控系统

    介绍一种基于AVR单片机(Atmegal28)实现的直流电源监控系统的设计方案及其软、硬件设计思路。该监控系统能检测直流电源系统的各种实时运行数据及状态,自动监测各种故障并发出声光报警,实现蓄电池的智能管理;通过RS232或RS485与上位机通信,实现遥信、遥测、遥控和遥调等功能,能较好地满足无人值守变电站及配网自动化的需要。

    标签: AVR 单片机 直流电源 监控系统

    上传时间: 2013-11-11

    上传用户:gxf2016

  • 基于单片机的数字化B超键盘设计

    针对目前使用的RS232接口数字化B超键盘存在PC主机启动时不能设置BIOS,提出一种PS2键盘的设计方法。基于W78E052D单片机,采用8通道串行A/D转换器设计了8个TGC电位器信息采集电路,电位器位置信息以键盘扫描码序列形式发送,正交编码器信号通过XC9536XL转换为单片机可接收的中断信号,软件接收到中断信息后等效处理成按键。结果表明,在满足开机可设置BIOS同时,又可实现超声特有功能,不需要专门设计驱动程序,接口简单,成本低。 Abstract:  Aiming at the problem of the digital ultrasonic diagnostic imaging system keyboard with RS232 interface currently used couldn?蒺t set the BIOS when the PC boot, this paper proposed a design method of PS2 keyboards. Based on W78E052D microcontroller,designed eight TGC potentiometers information acquisition circuit with 8-channel serial A/D converter, potentiometer position information sent out with keyboard scan code sequentially.The control circuit based on XC9536 CPLD is used for converting the mechanical actions of the encoders into the signals that can be identified by the MCU, software received interrupt information and equivalently treatmented as key. The results show that the BIOS can be set to meet the boot, ultrasound specific functionality can be achieved at the same time, it does not require specially designed driver,the interface is simple and low cost.    

    标签: 单片机 B超 数字化 键盘设计

    上传时间: 2013-10-10

    上传用户:asdfasdfd

  • 通用1553B总线的信息监控系统

    在航电系统维护过程中,为解决定位故障的效率和降低维修成本等问题,提出了基于ICD(Interface Control Document,接口控制文件)的1553B总线的信息监控系统模型。该系统运用数据采集卡对总线中传输的信号有无失真、偏差等电气特性进行检测,并使用1553B通讯卡通过测控软件LabWindows/CVI编程与ICD数据库的动态链接,实现总线信息的解析和故障的判断。与传统的维护过程相比,这种模型能够从信号的电气特性以及信息的解析等全方位的去检测判断故障的来源,并且能够广泛在其他1553B总线系统内扩展应用。验证表明该监控系统可以对总线信息进行快速有效地监测分析,能满足应用需求。 Abstract:  In the process of avionics system maintenance, to solve the problems such as improving the efficiency of fast orientation to troubles and reducing maintenance cost, system of 1553B bus information monitor model based on ICD was proposed. The system observed whether the data which transmitted on the bus appear distortion and deviation by using data acquisition card. And using 1553B communication card programming of the measure software LabWindows/CVI and the dynamic linking of ICD database, message analysis and fault estimation could be realized. Compared with traditional maintenance, this model can all-dimensionally detect and analyze the source of faults from both electrical characteristics of the signal and message analysis, and it can be widely applied in the other 1553B system. Experiment shown that this monitor system can effectively detect and analyze the bus message and can meet the application requirements.  

    标签: 1553B 总线 信息监控

    上传时间: 2013-11-23

    上传用户:18752787361

  • 用多处理器系统级芯片解决手机的多媒体任务需求

    多媒体手机在满足传统语音通信的同时还必须提供稳定、高质量的多媒体表现,传统的单处理器方案不能满足这些并行任务的处理能力要求,采用具有视频、Java和安全专用硬件加速器的多处理器引擎系统级芯片能有效解决这些多媒体任务要求,并能有效降低系统功耗。 手机正在成为手持式娱乐中心,同时作为高端的宽带无线电话使用。用户携带手机是为了使用其无线功能,但同时也希望它具有PDA、MP3播放器、数码相机、摄像机、视频播放器和游戏机功能。然而,开发这样的一个多媒体设备具有更大的技术挑战,特别是在服务质量、反应速度和电池寿命等关键性能方面。解决这些问题的方法是将多个处理引擎集成到系统级芯片中。

    标签: 多处理器 系统级芯片 手机 多媒体

    上传时间: 2013-11-25

    上传用户:yepeng139

  • 基于PIC16C73的电子束焊机电视监视系统

    介绍电子束焊机电视监视系统工作原理#论述了电视行场扫描原理和视频叠加原理$ 针 对电子束焊机电视监视系统的特点及存在的缺点# 提出一种基PIC16C73单片机及字符叠加芯片 -UPD6453的电子束焊机电视监控系统的设计方案# 并给出了详细的系统软硬件实现方法$ 整个系统 高效可靠#具有电路简单%稳定性好%易于扩展%实用性好等优点#提高了焊接效率和焊接质量$  

    标签: PIC 16C C73 16

    上传时间: 2013-10-22

    上传用户:jasson5678

  • 基于单总线式无线温度采集系统设计

    为提高温度测量效率,降低系统的成本,扩展传输距离,设计出一种新型温度采集系统。单片机通过控制具有单总线方式的温度传感器DS18B20实现对温度的测量,同时单片机通过控制具有单总线方式300~450MHz频率范围内的MAX7044与MAX7033无线发射与接收芯片实现温度数据的无线传输。与传统温度采集系统相比,该系统利用单总线方式连接,采用无线传输方式实现远距离通信,易于系统的集成与扩展。实验结果表明,该系统结构简单、方便移植,能够同时实现多达上百点温度的测量与500m范围的传输。 Abstract:  To improve the temperature measurement efficiency and reduce system cost,expansion of transmission distance,a new type of temperature acquisition system is designed.Microcontroller controlled temperature sensor DS18B20which has a single-bus achieves temperature measurement,while microcontroller by controlled the MAX7044and MAX7033chip with a single-bus and having300~450MHz radiofrequency to achieve the wireless transmission of temperature data.Compared with conventional temperature acquisition system,the system uses single-bus connected,and uses wireless transmission means to achieve long-distance communications,easy-to-system integration and expansion.The experimental results show that the system is simple,convenient transplantation,and can be implemented in as many as a hundred-point temperature measure-ment and the transmission range of500meters.

    标签: 单总线 无线温度 采集 系统设计

    上传时间: 2013-10-29

    上传用户:515414293

  • 基于51单片机的无线识别装置系统

    介绍一种简单射频识别系统设计。该设计包括阅读器、应答器和线圈3部分。由单片机控制阅读器向应答器发射无线信号,并接收应答器回送的信号,再通过分析回送信号识别物品。阅读器和应答器之间以半双工通信方式通信。 Abstract:  A simple design of radio frequency identification system is given in this paper.The design includes reader,responder and winding.Through MCU,signals are sent to responder from reader,then corresponding signals are sent back. According to the analysis of the signals sent back,the objects can be identified.Half-duplex communication is adopted? between? reader? and? responder.

    标签: 51单片机 无线识别 装置

    上传时间: 2013-10-11

    上传用户:plsee

  • 基于AT89C51的智能矿井环境质量监控系统

     为满足矿井安全生产要求,介绍了一种以AT89C51单片机为主控器,对环境空气的温度、有毒易燃气体的浓度等进行检测的监控系统。该系统配合外围电路能实现对上述环境指标的控制并存储相关数据与上位PC机通信。它采用硬件抗干扰和软件抗干扰技术,以确保整个系统工作的准确性。 Abstract:  In order to meet the needs of mine produce safety,a kind of intellignet mine ambient monotoring and control system based on AT89C51 is introduced.This system can detect the temperature of ambient of mine,the density of poisonous inflammable gas,combined external circuit.With its function part, this system can change above-mentioned elements.

    标签: 89C C51 AT 89

    上传时间: 2013-11-10

    上传用户:wendy15

  • 多路温度采集及监控系统的设计

    介绍一种基于单片机的多路温度采集及监控系统,能够测量6路温度信号,具有计算机联网功能,各测量点可以单独监控和设置,可根据用户的需求自动控制。测量温度范围为-10 ℃~200 ℃,控制方式采用模拟量调压模式。该系统具有控制精度高、冲击小等特点。 Abstract:  A temperature collecting and surveillance-controlling system based on sing-chip microcomputer is introduced. It can measure 6 channel signal of the temperature,and it has a function of network connection.The temperature measure points can be monitored and located, it can be controlled automatic according to user’s demand.The temperature range is -10℃ to 200℃.The model of control is adjustable voltage with simulation. It features high precision and little impact.

    标签: 多路 温度采集 监控系统

    上传时间: 2013-10-23

    上传用户:bjgaofei