虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

垃圾自动清扫机

  • 自动打铃器

    摘要:文章介绍了一种以8031单片机为核心片外扩展at93c46电擦除可编程只读存储器并带有数码LED显示时.分.秒和以指示灯做标志的按键校时自动打铃器。 关键词:单片机  存储器  数码管

    标签: 自动 打铃器

    上传时间: 2013-11-01

    上传用户:refent

  • 基于W77E58的跑步机联网系统的开发

    对于传统的跑步机无法联机组网,保存历史数据,实时调试等问题,介绍了一个由多台跑步机通过RS-232串行总线与上位机相连组成的跑步机联网系统。系统采用W77E58作为下位机核心控制器件,它具有双串行通讯端口,其中一个串口用于与变频器通讯,另一个串口则与上位机相连,构成跑步机网络。 Abstract:  The traditional running machine can not be connected to a network, saving historical data, real time debug etc.In this paper,a new network system which is composed of running machines connected by a RS-232 communication bus is introduced.In the system,W77E58 is used as a core control unit.W77E58 has two serial ports,one is connected to the inverter and the other is connected to the PC. Thus a network appears.

    标签: W77E58 跑步机 联网系统

    上传时间: 2014-12-27

    上传用户:哇哇哇哇哇

  • LS7266R1在电子式万能材料试验机中的应用

    针对材料试验机等设备中要求测量或控制材料拉伸或压缩的位移,一般采用光电轴角编码器检测位置信号,输出正交编码脉冲信号。若采用其他方法检测位置信号,必然导致电路设计复杂,可靠性降低。因此,提出一种基于LS7266R1的电子式万能材料试验机设计方案。给出了试验机中的控制器工作原理,LS7266R1与单片机的接口硬件设计,以及主程序软件流程图。巧妙地把力量传感器,位移传感器等机械运动状态的压力或拉力以及位置坐标,变成了电压信号和电脉冲数字信号,供A/D测量和LS7266R1计数,从而实现了独立完成材料试验控制或通过PC机串口命令完成材料试验控制。 Abstract:  Aiming at the requirement that the displacement of the tension and compression always be tested and controlled in the equipement such as material testing machine. The position signal was tested by photoelectric axial angle coder. Therefore, the paper proposes the design of electronic universal testing machine design based on LS7266R1. If the position signal detected by other methods, will inevitably lead to the circuit design complexity, reliability decreased. The work theory of the controller, the hardware interface design between LS7266R1 and single chip, and the flow chart of main program, are presented in this paper. The signal of the compression or tension power and displacement at working, which tested by power sensor and displacement sensor especially, is changed into electric voltage and electric pulse numerical signals. And these signals can be tested by A/D and counted by LS7266R1. Finally the test of the material properties can be controlled by itself, or controlled by the COM command of PC.

    标签: 7266R 7266 LS R1

    上传时间: 2013-11-02

    上传用户:yl1140vista

  • 基于MSP430F149的智能电池巡检系统的设计

    介绍了电力操作电源与智能电池巡检系统的特点,给出了一种基于超低功耗单片机MSP430 F149针对中小型变电站自动化运行的专用设备的基本设计原理及实现方法,最后给出了详细硬件构成和软件实现。该系统能满足中小型变电站安全、可靠、自动运行的要求,并通过与上位机的串行通信实现变电站的远程管理和控制。 Abstract:  The characters of the intelligent battery data logging system of the electric operation power are introduced.The basic design principle and the implemented methods of the special equipment which only designed for the middle or small transformer substation based on MSP430F149 are prescribed. Finally, the hardware block diagram and the software flow chart are also given. The function that the system finally needs to realize can basically meet with the middle or small transformer substation’s satisfy, reliably,and automatic running.And it can also realize the transformer substation long-distance management and control by serial communicating with the host computer.

    标签: 430F F149 MSP 430

    上传时间: 2013-11-25

    上传用户:黄华强

  • 基于51单片机的作息号音自动播放器设计

     利用AT89C51型单片机定时和中断功能,配以LM386型音频功率放大器,构成了作息号音自动播放器,为学校和机关管理提供方便。 Abstract:  Using timing and interrupt function of the AT89C51 single-chip microcomputer and the LM386 audio power amplifier.It is constituted the automatic bugle player.This player facilitates the institution and the school daily management.

    标签: 51单片机 自动 播放器

    上传时间: 2013-10-10

    上传用户:wivai

  • 基于双ATmega128的安检力学试验机设计

    针对当前安检力学试验机所能完成的试验种类单一、自动化程度低等问题,提出一种以ATmega128单片机为核心控制器的安检力学试验机的设计。详细阐述了该安检力学试验机各个组成部分的设计原理和方案,并且给出了各部分的软件设计思想和操作流程。经过大量测试试验表明:设计的安检力学试验机可以完成多达十余种的力学安检试验,完全符合相关国家标准,并且具有数据采集精度高、传输速度快、操作安全简便等特点,实现了安检设备的多功能化、数字化和自动化。 Abstract:  Currently, many mechanical security testing machines have only one function. The degree of automation of them is low. To solve those problems, a new kind of mechanical security testing machine, using ATmega128 micro-controller as its core controller, has been advanced. It describes the components of the machine. The principles and the scheme in the designing processes are presented in detail, and the software architecture and the operation processes of each part are given. After having done many testing, we have reached the following conclusions: the mechanical security testing machine presented can do over ten mechanical security tests complying with related national standards. It has high data acquisition accuracy and high transmission speed. The operation of the machine is simple and safe. In general, this machine is a multi-functional, highly automatic, digitalized security testing device.

    标签: ATmega 128 安检 试验机

    上传时间: 2013-11-05

    上传用户:a67818601

  • 基于STC89C52单片机控制的超声波汽车防撞系统

    随着科学技术的快速发展,超声波将在科学技术中的应用越来越广。本文对超声波传感器测距的可能性进行了理论分析,利用模拟电子、数字电子、微机接口、超声波换能器、以及超声波在介质的传播特性等知识,采用以STC89C52 单片机为核心的低成本、高精度、微型化数字显示超声波测距的硬件电路和软件设计方法在此基础上设计了系统的总体方案,最后通过硬件和软件实现了各个功能模块。为了保证超声波测距传感器的可靠性和稳定性,采取了相应的抗干扰措施。就超声波的传播特性,超声波换能器的工作特性、超声波发射、接收、超声微弱信号放大、波形整形、速度变换、语音提示电路及系统功能软件等做了详细说明.实现障碍物的距离测试、显示和报警,超声波测距范围30CM-300CM,精度在十厘米左右。这套系统软硬件设计合理、抗干扰能力强、实时性良好,经过系统扩展和升级,可以用于倒车雷达、建筑施工工地以及一些工业现场,例如:测量液位、井深、管道长度等场合。可以广泛应用于工业生产、医学检查、日常生活、无人驾驶汽车、自动作业现场的自动引导小车、机器人、液位计等。

    标签: STC 89C C52 89

    上传时间: 2013-11-05

    上传用户:lixinxiang

  • C8051F单片机教学实验机简介

    概述MCS-51单片机引入国内高等教学已达10年之久,随着半导体技术的迅猛发展,经典的MCS-51单片机已不能适应当前的教学需要。全球领先的C8051F单片机覆盖了嵌入式系统的主要技术内容,且与51单片机相兼容,是MCS-51单片机的升级换代产品。且目前发展势头强劲,其必将成为单片机教学的新方向。SILABS公司MCU产品中国区代理--新华龙电子有限公司适时的设计、开发了贴近当前高校教学的C8051F单片机教学实验机(NCD-CIP51F020-B)。

    标签: C8051F 单片机 教学实验

    上传时间: 2013-11-07

    上传用户:lvzhr

  • PHILIPS公司80C51系列单片机与众不同的4大特点是什

    1.UART增加2个新的特性,即帧错误检测和多机通信中的从机地址自动识别。(1)帧错误检测可用于UART检查工作方式1、2和3时的停止位。例如,由于UART通信线路上的噪声或者2个MCU同时发送可能引起停止位的丢失。(2)多机通信中的从机地址自动识别功能即是说只允许该地址从机被硬件中断,而不是由软件进行地址比较的,那么自动地址识别可以减少为UART服务所需要的MCU时间。与此同时使用广播地址可以一次寻址所有的从处理器。2.4个中断优先级:IPH和IP结合使用决定了每个中断的优先级,00、01、10、11的排列依次由低到高组成4级中断优先权。3.双DPTR指针:可用于寻址外部数据存储器。通过对AUCR1的DPS位编程,以实现对2个16位DPTR寄存器的切换。4.将AUXR.0置位,禁止ALE的信号输出,从而达到降低单片机本身的EMI电磁干扰。

    标签: PHILIPS 80C51 单片机

    上传时间: 2013-10-23

    上传用户:hj_18

  • PC机与MCS51单片机串行通信接口电路的设计

    摘要:介绍了采取专用电平转换芯片MAX232实现PC机与MCS51单片机之间的串行通信的方法.通过对系统的通信方式选择89C51通信波特率的设置、通信的设置,以及对接口电路的软件和硬件的设计分析,展示了该电路的实用性.关键词:微处理器;PC机;串行通信;RS-232接口;MAX232芯片

    标签: MCS 51 PC机 单片机串行

    上传时间: 2014-01-22

    上传用户:shizhanincc