代码搜索：IOOUT
找到约 17 项符合「IOOUT」的源代码
代码结果 17
www.eeworm.com/read/293486/8291175
c 8ioin+8ioout.c
//（2） 主程序
// 该程序用于8路开关量输入和8路开关量输出
#include "register.h"
int j,k;
main() // 初始化子程序
{
asm(" setc SXM"); // 抑制符号位扩展
asm(" clrc OVM"); // 累加器中结果正常溢出
asm
www.eeworm.com/read/293486/8291186
pjt 8ioin+8ioout.pjt
; Code Composer Project File, Version 2.0 (do not modify or remove this line)
[Project Settings]
ProjectDir="E:\lp\2407\2407new\8IOIN+8IOOUT\"
ProjectType=Executable
CPUFamily=TMS320C24XX
Tool=
www.eeworm.com/read/335711/12503978
c 8ioin+8ioout.c
//（2） 主程序
// 该程序用于8路开关量输入和8路开关量输出
#include "register.h"
int j,k;
main() // 初始化子程序
{
asm(" setc SXM"); // 抑制符号位扩展
asm(" clrc OVM"); // 累加器中结果正常溢出
asm
www.eeworm.com/read/335711/12503990
pjt 8ioin+8ioout.pjt
; Code Composer Project File, Version 2.0 (do not modify or remove this line)
[Project Settings]
ProjectDir="E:\lp\2407\2407new\8IOIN+8IOOUT\"
ProjectType=Executable
CPUFamily=TMS320C24XX
Tool=
www.eeworm.com/read/234431/14112879
v i2c_extender_code_example.v
module I2CslaveWith8bitsIO(SDA, SCL, IOout);
inout SDA;
input SCL;
output [7:0] IOout;
Then the 7-bits address that we want for our I2C slave.
parameter I2C_ADR = 7'h27;
//Then the start an
www.eeworm.com/read/221021/14779646
vhd ds18b20.vhd
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity ds18b20 is
port(start: in std_logic;
ioout: out std_logic;
ioin: in std_logic;
clk:in std_logic;
www.eeworm.com/read/441392/7671150
c ds18b20.c
/************DS18B20初始化******/
uchar Ds18b20_Init(void)//存在返0.否则返1
{ uchar temp=1;
uchar outtime=ReDetectTime;//超时时间
while(outtime--&& temp)
{
IoOut_DQ();
Delay_us(2)