📄 function.map.rpt
字号:
+----------------------------------------------------------------------+
; Analysis & Synthesis Resource Usage Summary ;
+---------------------------------------------+------------------------+
; Resource ; Usage ;
+---------------------------------------------+------------------------+
; Estimated Total logic elements ; 37 ;
; Total combinational functions ; 37 ;
; Logic element usage by number of LUT inputs ; ;
; -- 4 input functions ; 15 ;
; -- 3 input functions ; 18 ;
; -- <=2 input functions ; 4 ;
; -- Combinational cells for routing ; 0 ;
; Logic elements by mode ; ;
; -- normal mode ; 22 ;
; -- arithmetic mode ; 15 ;
; Total registers ; 37 ;
; I/O pins ; 37 ;
; Embedded Multiplier 9-bit elements ; 1 ;
; Maximum fan-out node ; logic_control:inst|clr ;
; Maximum fan-out ; 18 ;
; Total fan-out ; 243 ;
; Average fan-out ; 2.15 ;
+---------------------------------------------+------------------------+
+---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
; Analysis & Synthesis Resource Utilization by Entity ;
+-------------------------------------------+-------------------+--------------+-------------+------+--------------+---------+-----------+------+--------------+------------------------------------------------------------------------------------------+
; Compilation Hierarchy Node ; LC Combinationals ; LC Registers ; Memory Bits ; M4Ks ; DSP Elements ; DSP 9x9 ; DSP 18x18 ; Pins ; Virtual Pins ; Full Hierarchy Name ;
+-------------------------------------------+-------------------+--------------+-------------+------+--------------+---------+-----------+------+--------------+------------------------------------------------------------------------------------------+
; |Block1 ; 37 (1) ; 37 (0) ; 0 ; 0 ; 1 ; 1 ; 0 ; 37 ; 0 ; |Block1 ;
; |logic_control:inst| ; 20 (20) ; 9 (9) ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; |Block1|logic_control:inst ;
; |lpm_add_sub0:inst11| ; 16 (0) ; 0 (0) ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; |Block1|lpm_add_sub0:inst11 ;
; |lpm_add_sub:lpm_add_sub_component| ; 16 (0) ; 0 (0) ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; |Block1|lpm_add_sub0:inst11|lpm_add_sub:lpm_add_sub_component ;
; |add_sub_2pe:auto_generated| ; 16 (16) ; 0 (0) ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; |Block1|lpm_add_sub0:inst11|lpm_add_sub:lpm_add_sub_component|add_sub_2pe:auto_generated ;
; |lpm_dff5:inst10| ; 0 (0) ; 16 (0) ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; |Block1|lpm_dff5:inst10 ;
; |lpm_ff:lpm_ff_component| ; 0 (0) ; 16 (16) ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; |Block1|lpm_dff5:inst10|lpm_ff:lpm_ff_component ;
; |lpm_mult0:inst1| ; 0 (0) ; 0 (0) ; 0 ; 0 ; 1 ; 1 ; 0 ; 0 ; 0 ; |Block1|lpm_mult0:inst1 ;
; |lpm_mult:lpm_mult_component| ; 0 (0) ; 0 (0) ; 0 ; 0 ; 1 ; 1 ; 0 ; 0 ; 0 ; |Block1|lpm_mult0:inst1|lpm_mult:lpm_mult_component ;
; |mult_jeo:auto_generated| ; 0 (0) ; 0 (0) ; 0 ; 0 ; 1 ; 1 ; 0 ; 0 ; 0 ; |Block1|lpm_mult0:inst1|lpm_mult:lpm_mult_component|mult_jeo:auto_generated ;
; |rightshift:inst12| ; 0 (0) ; 12 (12) ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; 0 ; |Block1|rightshift:inst12 ;
+-------------------------------------------+-------------------+--------------+-------------+------+--------------+---------+-----------+------+--------------+------------------------------------------------------------------------------------------+
Note: For table entries with two numbers listed, the numbers in parentheses indicate the number of resources of the given type used by the specific entity alone. The numbers listed outside of parentheses indicate the total resources of the given type used by the specific entity and all of its sub-entities in the hierarchy.
+-----------------------------------------------------+
; Analysis & Synthesis DSP Block Usage Summary ;
+---------------------------------------+-------------+
; Statistic ; Number Used ;
+---------------------------------------+-------------+
; Simple Multipliers (9-bit) ; 1 ;
; Simple Multipliers (18-bit) ; 0 ;
; Embedded Multiplier Blocks ; -- ;
; Embedded Multiplier 9-bit elements ; 1 ;
; Signed Embedded Multipliers ; 0 ;
; Unsigned Embedded Multipliers ; 1 ;
; Mixed Sign Embedded Multipliers ; 0 ;
; Variable Sign Embedded Multipliers ; 0 ;
; Dedicated Input Shift Register Chains ; 0 ;
+---------------------------------------+-------------+
Note: number of Embedded Multiplier Blocks used is only available after a successful fit.
+------------------------------------------------------+
; General Register Statistics ;
+----------------------------------------------+-------+
; Statistic ; Value ;
+----------------------------------------------+-------+
; Total registers ; 37 ;
; Number of registers using Synchronous Clear ; 16 ;
; Number of registers using Synchronous Load ; 0 ;
; Number of registers using Asynchronous Clear ; 0 ;
; Number of registers using Asynchronous Load ; 0 ;
; Number of registers using Clock Enable ; 0 ;
; Number of registers using Preset ; 0 ;
+----------------------------------------------+-------+
+-----------------------------------------------------------------------------------------------------------------------------------------------------+
; Multiplexer Restructuring Statistics (Restructuring Performed) ;
+--------------------+-----------+---------------+----------------------+------------------------+------------+---------------------------------------+
; Multiplexer Inputs ; Bus Width ; Baseline Area ; Area if Restructured ; Saving if Restructured ; Registered ; Example Multiplexer Output ;
+--------------------+-----------+---------------+----------------------+------------------------+------------+---------------------------------------+
; 36:1 ; 5 bits ; 120 LEs ; 115 LEs ; 5 LEs ; Yes ; |Block1|logic_control:inst|counter[1] ;
+--------------------+-----------+---------------+----------------------+------------------------+------------+---------------------------------------+
+--------------------------------------------------------------------------------------+
; Parameter Settings for User Entity Instance: lpm_dff5:inst10|lpm_ff:lpm_ff_component ;
+------------------------+------------+------------------------------------------------+
; Parameter Name ; Value ; Type ;
+------------------------+------------+------------------------------------------------+
; LPM_WIDTH ; 16 ; Integer ;
; LPM_AVALUE ; UNUSED ; Untyped ;
; LPM_SVALUE ; UNUSED ; Untyped ;
; LPM_FFTYPE ; DFF ; Untyped ;
; DEVICE_FAMILY ; Cyclone II ; Untyped ;
; CBXI_PARAMETER ; NOTHING ; Untyped ;
; AUTO_CARRY_CHAINS ; ON ; AUTO_CARRY ;
; IGNORE_CARRY_BUFFERS ; OFF ; IGNORE_CARRY ;
; AUTO_CASCADE_CHAINS ; ON ; AUTO_CASCADE ;
; IGNORE_CASCADE_BUFFERS ; OFF ; IGNORE_CASCADE ;
+------------------------+------------+------------------------------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".
+----------------------------------------------------------------------------------------------------+
; Parameter Settings for User Entity Instance: lpm_add_sub0:inst11|lpm_add_sub:lpm_add_sub_component ;
+------------------------+-------------+-------------------------------------------------------------+
; Parameter Name ; Value ; Type ;
+------------------------+-------------+-------------------------------------------------------------+
; LPM_WIDTH ; 16 ; Integer ;
; LPM_REPRESENTATION ; SIGNED ; Untyped ;
; LPM_DIRECTION ; ADD ; Untyped ;
; ONE_INPUT_IS_CONSTANT ; NO ; Untyped ;
; LPM_PIPELINE ; 0 ; Untyped ;
; MAXIMIZE_SPEED ; 5 ; Untyped ;
; REGISTERED_AT_END ; 0 ; Untyped ;
; OPTIMIZE_FOR_SPEED ; 5 ; Untyped ;
; USE_CS_BUFFERS ; 1 ; Untyped ;
; CARRY_CHAIN ; MANUAL ; Untyped ;
; CARRY_CHAIN_LENGTH ; 48 ; CARRY_CHAIN_LENGTH ;
; DEVICE_FAMILY ; Cyclone II ; Untyped ;
; USE_WYS ; OFF ; Untyped ;
; STYLE ; FAST ; Untyped ;
; CBXI_PARAMETER ; add_sub_2pe ; Untyped ;
; AUTO_CARRY_CHAINS ; ON ; AUTO_CARRY ;
; IGNORE_CARRY_BUFFERS ; OFF ; IGNORE_CARRY ;
; AUTO_CASCADE_CHAINS ; ON ; AUTO_CASCADE ;
; IGNORE_CASCADE_BUFFERS ; OFF ; IGNORE_CASCADE ;
+------------------------+-------------+-------------------------------------------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".
+------------------------------------------------------------------------------------------+
; Parameter Settings for User Entity Instance: lpm_mult0:inst1|lpm_mult:lpm_mult_component ;
+------------------------------------------------+------------+----------------------------+
; Parameter Name ; Value ; Type ;
+------------------------------------------------+------------+----------------------------+
; AUTO_CARRY_CHAINS ; ON ; AUTO_CARRY ;
; IGNORE_CARRY_BUFFERS ; OFF ; IGNORE_CARRY ;
; AUTO_CASCADE_CHAINS ; ON ; AUTO_CASCADE ;
; IGNORE_CASCADE_BUFFERS ; OFF ; IGNORE_CASCADE ;
; LPM_WIDTHA ; 8 ; Integer ;
; LPM_WIDTHB ; 8 ; Integer ;
; LPM_WIDTHP ; 16 ; Integer ;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -