gmajpfi.fit

vhdl实现的计数器,可以从0记到999,该代码使用模块化设计思想,开发工具muxplus2

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 11/14/2008 16:47:51      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "gmajpfi"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "a0"                           : INPUT_PIN  = 84     ;
    "a1"                           : INPUT_PIN  = 66     ;
    "a2"                           : INPUT_PIN  = 79     ;
    "a3"                           : INPUT_PIN  = 24     ;
    "b0"                           : INPUT_PIN  = 43     ;
    "b1"                           : INPUT_PIN  = 23     ;
    "b2"                           : INPUT_PIN  = 47     ;
    "b3"                           : INPUT_PIN  = 49     ;
    "ch0"                          : INPUT_PIN  = 44     ;
    "ch1"                          : INPUT_PIN  = 42     ;
    "ch2"                          : INPUT_PIN  = 2      ;
    "c0"                           : INPUT_PIN  = 1      ;
    "c1"                           : INPUT_PIN  = 22     ;
    "c2"                           : INPUT_PIN  = 21     ;
    "c3"                           : INPUT_PIN  = 25     ;
    "dataout0"                     : OUTPUT_PIN = 65     ;
    "dataout1"                     : OUTPUT_PIN = 67     ;
    "dataout2"                     : OUTPUT_PIN = 64     ;
    "dataout3"                     : OUTPUT_PIN = 81     ;
    ":22"                          : LOCATION   = LC3_B18;
    ":40"                          : LOCATION   = LC4_B22;
    ":41"                          : LOCATION   = LC3_B22;
    ":45"                          : LOCATION   = LC1_B22;
    ":52"                          : LOCATION   = LC2_B22;
    ":53"                          : LOCATION   = LC2_B18;
    ":54"                          : LOCATION   = LC7_B22;
    ":61"                          : LOCATION   = LC7_B18;
    ":62"                          : LOCATION   = LC6_B18;
    ":63"                          : LOCATION   = LC1_B18;
    ":70"                          : LOCATION   = LC5_B18;
    ":71"                          : LOCATION   = LC4_B18;
    ":72"                          : LOCATION   = LC8_B18;

END;

INTERNAL_INFO "gmajpfi"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD0P84  : LORAX = "1:FB0|2:FH0R1,PA0R1C17->LC8_B18||";
    OH2R1P66 : LORAX = "1:G46R1,PA8R1C17->LC1_B18|";
    OV1C23P79 : LORAX = "1:V8C23,HHR15R1,PA0R1C21->LC7_B22|";
    OH13R1P24 : LORAX = "1:G91R1,PA7R1C21->LC1_B22|";
    OD5P43  : LORAX = "1:FB5|2:CH1R1,PA7R1C17->LC5_B18||";
    OH11R1P23 : LORAX = "1:G42R1,PA17R1C17->LC7_B18|";
    OV2C13P47 : LORAX = "1:V14C13,HHR36R1,PA20R1C21->LC2_B22|";
    OV3C15P49 : LORAX = "1:V18C15,HHR26R1,PA9R1C21->LC4_B22|";
    OD2P44  : LORAX = "1:FB2|2:FH2R1|3:PA6R1C17->LC3_B18,->LC2_B18,->LC7_B18,->LC6_B18,->LC5_B18,->LC4_B18|,3:PA6R1C21->LC4_B22,->LC3_B22,->LC2_B22|||";
    OD3P42  : LORAX = "1:FB3|2:FH3R1|3:PA5R1C17->LC3_B18,->LC2_B18,->LC7_B18,->LC6_B18,->LC5_B18,->LC4_B18|,3:PA5R1C21->LC4_B22,->LC3_B22,->LC2_B22|||";
    OD1P2   : LORAX = "1:FB1|2:FH1R1|3:PA20R1C17->LC3_B18,->LC2_B18,->LC7_B18,->LC6_B18,->LC5_B18,->LC4_B18|,3:PA13R1C21->LC4_B22,->LC3_B22,->LC2_B22|||";
    OD4P1   : LORAX = "1:FB4|2:CH0R1,PA19R1C17->LC4_B18||";
    OH9R1P22 : LORAX = "1:G43R1,PA16R1C17->LC6_B18|";
    OH8R1P21 : LORAX = "1:G13R1,PA4R1C17->LC2_B18|";
    OH15R1P25 : LORAX = "1:G39R1,PA11R1C21->LC3_B22|";
    LC3_B18 : LORAX = "1:MSW2R1C17,G6R1,PA15R1C21->LC1_B22,->LC7_B22|";
    LC1_B22 : LORAX = "1:MSW0R1C21,V0C21->OV0C21P81|";
    LC2_B18 : LORAX = "1:MSW1R1C17,G11R1,PA2R1C21->LC7_B22|";
    LC7_B22 : LORAX = "1:MSW6R1C21,G84R1->OH6R1P64|";
    LC1_B18 : LORAX = "1:MSW0R1C17,HHR20R1->OH0R1P67|";
    LC8_B18 : LORAX = "1:MSW4R1C16,G62R1->OH4R1P65|";
	LC3_B18 : LORAX2 = "X, OD3P42, OD1P2, OD2P44";
	LC4_B22 : LORAX2 = "OV3C15P49, OD1P2, OD3P42, OD2P44";
	LC3_B22 : LORAX2 = "OH15R1P25, OD1P2, OD3P42, OD2P44";
	LC1_B22 : LORAX2 = "OH13R1P24, LC4_B22, LC3_B22, LC3_B18";
	LC2_B22 : LORAX2 = "OV2C13P47, OD1P2, OD3P42, OD2P44";
	LC2_B18 : LORAX2 = "OH8R1P21, OD1P2, OD3P42, OD2P44";
	LC7_B22 : LORAX2 = "OV1C23P79, LC2_B22, LC2_B18, LC3_B18";
	LC7_B18 : LORAX2 = "OH11R1P23, OD1P2, OD3P42, OD2P44";
	LC6_B18 : LORAX2 = "OH9R1P22, OD1P2, OD3P42, OD2P44";
	LC1_B18 : LORAX2 = "OH2R1P66, LC7_B18, LC6_B18, LC3_B18";
	LC5_B18 : LORAX2 = "OD5P43, OD1P2, OD3P42, OD2P44";
	LC4_B18 : LORAX2 = "OD4P1, OD1P2, OD3P42, OD2P44";
	LC8_B18 : LORAX2 = "OD0P84, LC5_B18, LC4_B18, LC3_B18";
END;