second.fit.qmsg

VHDL语言设计的秒表

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 5.1 Build 176 10/26/2005 SJ Full Version " "Info: Version 5.1 Build 176 10/26/2005 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Mon Jun 16 10:07:03 2008 " "Info: Processing started: Mon Jun 16 10:07:03 2008" {  } {  } 0 0 "Processing started: %1!s!" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off second -c second " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off second -c second" {  } {  } 0 0 "Command: %1!s!" 0 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "second EP1C12Q240C8 " "Info: Selected device EP1C12Q240C8 for design \"second\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP1C6Q240C8 " "Info: Device EP1C6Q240C8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0}
{ "Info" "ITAN_TDC_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "fmax 1 MHz " "Info: Assuming a global fmax requirement of 1 MHz" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tsu " "Info: Not setting a global tsu requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tco " "Info: Not setting a global tco requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tpd " "Info: Not setting a global tpd requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0}  } {  } 0 0 "Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" 0 0}
{ "Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 0 0 "Performing register packing on registers with non-logic cell location assignments" 0 0}
{ "Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 0 0 "Completed register packing on registers with non-logic cell location assignments" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "User Assigned Global Signals Promotion Operation " "Info: Completed User Assigned Global Signals Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IFYGR_FYGR_GLOBAL_LINES_NEEDED_FOR_TORNADO_DQS" "0 " "Info: DQS I/O pins require 0 global routing resources" {  } {  } 0 0 "DQS I/O pins require %1!d! global routing resources" 0 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "clk Global clock " "Info: Automatically promoted signal \"clk\" to use Global clock" {  } { { "second.vhd" "" { Text "D:/miaobiao/second.vhd" 6 -1 0 } }  } 0 0 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0}
{ "Info" "IFYGR_FYGR_PIN_USES_INTERNAL_GLOBAL" "clk " "Info: Pin \"clk\" drives global clock, but is not placed in a dedicated clock pin position" {  } { { "second.vhd" "" { Text "D:/miaobiao/second.vhd" 6 -1 0 } } { "c:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "clk" } } } } { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "second" "UNKNOWN" "V1" "D:/miaobiao/db/second.quartus_db" { Floorplan "D:/miaobiao/" "" "" { clk } "NODE_NAME" } "" } } { "D:/miaobiao/second.fld" "" { Floorplan "D:/miaobiao/second.fld" "" "" { clk } "NODE_NAME" } }  } 0 0 "Pin \"%1!s!\" drives global clock, but is not placed in a dedicated clock pin position" 0 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL" "reset Global clock " "Info: Automatically promoted some destinations of signal \"reset\" to use Global clock" { { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "enmin~207 " "Info: Destination \"enmin~207\" may be non-global or may not use global clock" {  } { { "second.vhd" "" { Text "D:/miaobiao/second.vhd" 7 -1 0 } }  } 0 0 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0}  } { { "second.vhd" "" { Text "D:/miaobiao/second.vhd" 6 -1 0 } }  } 0 0 "Automatically promoted some destinations of signal \"%1!s!\" to use %2!s!" 0 0}
{ "Info" "IFYGR_FYGR_PIN_USES_INTERNAL_GLOBAL" "reset " "Info: Pin \"reset\" drives global clock, but is not placed in a dedicated clock pin position" {  } { { "second.vhd" "" { Text "D:/miaobiao/second.vhd" 6 -1 0 } } { "c:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "reset" } } } } { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "second" "UNKNOWN" "V1" "D:/miaobiao/db/second.quartus_db" { Floorplan "D:/miaobiao/" "" "" { reset } "NODE_NAME" } "" } } { "D:/miaobiao/second.fld" "" { Floorplan "D:/miaobiao/second.fld" "" "" { reset } "NODE_NAME" } }  } 0 0 "Pin \"%1!s!\" drives global clock, but is not placed in a dedicated clock pin position" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Info: Completed Auto Global Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_FYGR_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0 0 "Starting register packing" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Info: Started Fast Input/Output/OE register processing" {  } {  } 0 0 "Started Fast Input/Output/OE register processing" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Info: Finished Fast Input/Output/OE register processing" {  } {  } 0 0 "Finished Fast Input/Output/OE register processing" 0 0}
{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" {  } {  } 0 0 "Fitter is using %2!s! packing mode for logic elements with %1!s! setting for Auto Packed Registers logic option" 0 0}
{ "Info" "IFSAC_FSAC_START_LUT_IO_RAM_PACKING" "" "Info: Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" {  } {  } 0 0 "Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" 0 0}
{ "Info" "IFSAC_FSAC_FINISH_LUT_IO_RAM_PACKING" "" "Info: Finished moving registers into I/O cells, LUTs, and RAM blocks" {  } {  } 0 0 "Finished moving registers into I/O cells, LUTs, and RAM blocks" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" {  } {  } 0 0 "Finished register packing" 0 0}
{ "Warning" "WCUT_CUT_UNATTACHED_ASGN" "" "Warning: Ignored locations or region assignments to the following nodes" { { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "clk1 " "Warning: Node \"clk1\" is assigned to location or region, but does not exist in design" {  } { { "c:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "clk1" } } } }  } 0 0 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "daout " "Warning: Node \"daout\" is assigned to location or region, but does not exist in design" {  } { { "c:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "daout" } } } }  } 0 0 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0}  } {  } 0 0 "Ignored locations or region assignments to the following nodes" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "2.952 ns register register " "Info: Estimated most critical path is register to register delay of 2.952 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns count\[0\] 1 REG LAB_X1_Y24 5 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X1_Y24; Fanout = 5; REG Node = 'count\[0\]'" {  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "second" "UNKNOWN" "V1" "D:/miaobiao/db/second.quartus_db" { Floorplan "D:/miaobiao/" "" "" { count[0] } "NODE_NAME" } "" } } { "second.vhd" "" { Text "D:/miaobiao/second.vhd" 16 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.150 ns) + CELL(0.590 ns) 0.740 ns rtl~45 2 COMB LAB_X1_Y24 8 " "Info: 2: + IC(0.150 ns) + CELL(0.590 ns) = 0.740 ns; Loc. = LAB_X1_Y24; Fanout = 8; COMB Node = 'rtl~45'" {  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "second" "UNKNOWN" "V1" "D:/miaobiao/db/second.quartus_db" { Floorplan "D:/miaobiao/" "" "0.740 ns" { count[0] rtl~45 } "NODE_NAME" } "" } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.550 ns) + CELL(0.114 ns) 1.404 ns count\[0\]~327 3 COMB LAB_X1_Y24 7 " "Info: 3: + IC(0.550 ns) + CELL(0.114 ns) = 1.404 ns; Loc. = LAB_X1_Y24; Fanout = 7; COMB Node = 'count\[0\]~327'" {  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "second" "UNKNOWN" "V1" "D:/miaobiao/db/second.quartus_db" { Floorplan "D:/miaobiao/" "" "0.664 ns" { rtl~45 count[0]~327 } "NODE_NAME" } "" } } { "second.vhd" "" { Text "D:/miaobiao/second.vhd" 16 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.436 ns) + CELL(1.112 ns) 2.952 ns count\[0\] 4 REG LAB_X1_Y24 5 " "Info: 4: + IC(0.436 ns) + CELL(1.112 ns) = 2.952 ns; Loc. = LAB_X1_Y24; Fanout = 5; REG Node = 'count\[0\]'" {  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "second" "UNKNOWN" "V1" "D:/miaobiao/db/second.quartus_db" { Floorplan "D:/miaobiao/" "" "1.548 ns" { count[0]~327 count[0] } "NODE_NAME" } "" } } { "second.vhd" "" { Text "D:/miaobiao/second.vhd" 16 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "1.816 ns ( 61.52 % ) " "Info: Total cell delay = 1.816 ns ( 61.52 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0} { "Info" "ITDB_TOTAL_IC_DELAY" "1.136 ns ( 38.48 % ) " "Info: Total interconnect delay = 1.136 ns ( 38.48 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0}  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "second" "UNKNOWN" "V1" "D:/miaobiao/db/second.quartus_db" { Floorplan "D:/miaobiao/" "" "2.952 ns" { count[0] rtl~45 count[0]~327 count[0] } "NODE_NAME" } "" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 3 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 3 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Mon Jun 16 10:07:09 2008 " "Info: Processing ended: Mon Jun 16 10:07:09 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:07 " "Info: Elapsed time: 00:00:07" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}