msecond.sim.talkback.xml

来自「VHDL语言设计的秒表」· XML 代码 · 共 115 行

<!--
This XML file (created on Sat Jun 07 00:42:46 2008) contains limited information
from the compilation of logic designs using Quartus II software (BUT NOT THE
LOGIC DESIGN FILES) that will be transmitted to Altera Corporation through
operation of the "TalkBack" feature.  To enable/disable this feature, run
qtb_install.exe located in your quartus/bin folder.  For more information, go
to license.txt.
-->
<talkback>
<ver>5.1</ver>
<schema>quartus_version_5.1_build_176.xsd</schema><license>
	<host_id>0016ec66ef3b</host_id>
	<nic_id>0016ec66ef3b</nic_id>
	<cdrive_id>2a1d0905</cdrive_id>
</license>
<tool>
	<name>Quartus II</name>
	<version>5.1</version>
	<build>Build 176</build>
	<binary_type>32</binary_type>
	<module>quartus_sim.exe</module>
	<edition>Full Version</edition>
	<compilation_end_time>Sat Jun 07 00:42:48 2008</compilation_end_time>
</tool>
<machine>
	<os>Windows XP</os>
	<cpu>
		<proc_count>1</proc_count>
		<cpu_freq units="MHz">1607</cpu_freq>
	</cpu>
	<ram units="MB">479</ram>
</machine>
<top_file>C:/Documents and Settings/Administrator/桌面/miaobiao/msecond</top_file>
<mep_data>
	<command_line>quartus_sim --read_settings_files=on --write_settings_files=off msecond -c msecond</command_line>
</mep_data>
<simulator_settings>
	<row>
		<option>Simulation mode</option>
		<setting>Timing</setting>
		<default_value>Timing</default_value>
	</row>
	<row>
		<option>Start time</option>
		<setting units="ns">0</setting>
		<default_value units="ns">0</default_value>
	</row>
	<row>
		<option>Add pins automatically to simulation output waveforms</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Check outputs</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Report simulation coverage</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Detect setup and hold time violations</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Detect glitches</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Automatically save/load simulation netlist</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Disable timing delays in Timing Simulation</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Signal Activity File</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Group bus channels in simulation results</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Preserve fewer signal transitions to reduce memory requirements</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Overwrite Waveform Inputs With Simulation Outputs</option>
		<setting>Off</setting>
	</row>
</simulator_settings>
<simulator_summary>
	<simulation_start_time>0 ps</simulation_start_time>
	<simulation_end_time>1.0 us</simulation_end_time>
	<simulation_netlist_size>23 nodes</simulation_netlist_size>
	<simulation_coverage>     81.48 %</simulation_coverage>
	<total_number_of_transitions>1236</total_number_of_transitions>
	<family>Cyclone</family>
	<device>EP1C12Q240C8</device>
</simulator_summary>
<compile_id>CBD1997D</compile_id>
</talkback>