📄 testctl.rpt
字号:
Device-Specific Information: f:\eda38\k4\plj\testctl.rpt
testctl
** OUTPUTS **
Fed By Fed By Fan-In Fan-Out
Pin LC EC Row Col Primitive Code INP FBK OUT FBK Name
92 - - C -- OUTPUT 0 1 0 0 CLR_CNT
91 - - C -- OUTPUT 0 1 0 0 LOAD
33 - - F -- OUTPUT 0 1 0 0 TSTEN
Code:
s = Synthesized pin or logic cell
+ = Synchronous flipflop
/ = Slow slew-rate output
! = NOT gate push-back
r = Fitter-inserted logic cell
@ = Uses single-pin Clock Enable
& = Uses single-pin Output Enable
Device-Specific Information: f:\eda38\k4\plj\testctl.rpt
testctl
** BURIED LOGIC **
Fan-In Fan-Out
IOC LC EC Row Col Primitive Code INP FBK OUT FBK Name
- 6 - F 15 DFFE +s 0 0 1 0 DIV2CLK~1 (~5~1)
- 5 - C 09 DFFE + 0 0 1 1 DIV2CLK (:5)
- 4 - C 09 AND2 1 1 1 0 :36
Code:
s = Synthesized pin or logic cell
+ = Synchronous flipflop
/ = Slow slew-rate output
! = NOT gate push-back
r = Fitter-inserted logic cell
p = Packed register
Device-Specific Information: f:\eda38\k4\plj\testctl.rpt
testctl
** FASTTRACK INTERCONNECT UTILIZATION **
Row FastTrack Interconnect:
Global Left Half- Right Half-
FastTrack FastTrack FastTrack
Row Interconnect Interconnect Interconnect Input Pins Output Pins Bidir Pins
A: 0/ 96( 0%) 0/ 48( 0%) 0/ 48( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
B: 0/ 96( 0%) 0/ 48( 0%) 0/ 48( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
C: 0/ 96( 0%) 2/ 48( 4%) 0/ 48( 0%) 0/16( 0%) 2/16( 12%) 0/16( 0%)
D: 0/ 96( 0%) 0/ 48( 0%) 0/ 48( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
E: 0/ 96( 0%) 0/ 48( 0%) 0/ 48( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
F: 0/ 96( 0%) 0/ 48( 0%) 1/ 48( 2%) 0/16( 0%) 1/16( 6%) 0/16( 0%)
Column FastTrack Interconnect:
FastTrack
Column Interconnect Input Pins Output Pins Bidir Pins
01: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
02: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
03: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
04: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
05: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
06: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
07: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
08: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
09: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
10: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
11: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
12: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
13: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
14: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
15: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
16: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
17: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
18: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
19: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
20: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
21: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
22: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
23: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
24: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
EA: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
Device-Specific Information: f:\eda38\k4\plj\testctl.rpt
testctl
** CLOCK SIGNALS **
Type Fan-out Name
INPUT 3 CLK
Device-Specific Information: f:\eda38\k4\plj\testctl.rpt
testctl
** EQUATIONS **
CLK : INPUT;
-- Node name is 'CLR_CNT'
-- Equation name is 'CLR_CNT', type is output
CLR_CNT = _LC4_C9;
-- Node name is ':5' = 'DIV2CLK'
-- Equation name is 'DIV2CLK', location is LC5_C9, type is buried.
DIV2CLK = DFFE(!DIV2CLK, GLOBAL( CLK), VCC, VCC, VCC);
-- Node name is '~5~1' = 'DIV2CLK~1'
-- Equation name is '~5~1', location is LC6_F15, type is buried.
-- synthesized logic cell
_LC6_F15 = DFFE(!_LC6_F15, GLOBAL( CLK), VCC, VCC, VCC);
-- Node name is 'LOAD'
-- Equation name is 'LOAD', type is output
LOAD = !DIV2CLK;
-- Node name is 'TSTEN'
-- Equation name is 'TSTEN', type is output
TSTEN = _LC6_F15;
-- Node name is ':36'
-- Equation name is '_LC4_C9', type is buried
_LC4_C9 = LCELL( _EQ001);
_EQ001 = !CLK & !DIV2CLK;
Project Information f:\eda38\k4\plj\testctl.rpt
** COMPILATION SETTINGS & TIMES **
Processing Menu Commands
------------------------
Design Doctor = off
Logic Synthesis:
Synthesis Type Used = Multi-Level
Default Synthesis Style = NORMAL
Logic option settings in 'NORMAL' style for 'FLEX10K' family
CARRY_CHAIN = ignore
CARRY_CHAIN_LENGTH = 32
CASCADE_CHAIN = ignore
CASCADE_CHAIN_LENGTH = 2
DECOMPOSE_GATES = on
DUPLICATE_LOGIC_EXTRACTION = on
MINIMIZATION = full
MULTI_LEVEL_FACTORING = on
NOT_GATE_PUSH_BACK = on
REDUCE_LOGIC = on
REFACTORIZATION = on
REGISTER_OPTIMIZATION = on
RESYNTHESIZE_NETWORK = on
SLOW_SLEW_RATE = off
SUBFACTOR_EXTRACTION = on
IGNORE_SOFT_BUFFERS = on
USE_LPM_FOR_AHDL_OPERATORS = off
Other logic synthesis settings:
Automatic Global Clock = on
Automatic Global Clear = on
Automatic Global Preset = on
Automatic Global Output Enable = on
Automatic Fast I/O = off
Automatic Register Packing = off
Automatic Open-Drain Pins = on
Automatic Implement in EAB = off
Optimize = 5
Default Timing Specifications: None
Cut All Bidir Feedback Timing Paths = on
Cut All Clear & Preset Timing Paths = on
Ignore Timing Assignments = on
Functional SNF Extractor = off
Linked SNF Extractor = off
Timing SNF Extractor = on
Optimize Timing SNF = off
Generate AHDL TDO File = off
Fitter Settings = NORMAL
Use Quartus Fitter = on
Smart Recompile = off
Total Recompile = off
Interfaces Menu Commands
------------------------
EDIF Netlist Writer = off
Verilog Netlist Writer = off
VHDL Netlist Writer = off
Compilation Times
-----------------
Compiler Netlist Extractor 00:00:00
Database Builder 00:00:00
Logic Synthesizer 00:00:00
Partitioner 00:00:00
Fitter 00:00:01
Timing SNF Extractor 00:00:00
Assembler 00:00:00
-------------------------- --------
Total Time 00:00:01
Memory Allocated
-----------------
Peak memory allocated during compilation = 14,722K
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -