📄 graber.pin
字号:
-- Copyright (C) 1991-2006 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCC_INT : Dedicated power pin, which MUST be connected to VCC (5.0V).
-- VCC_IO : Dedicated power pin, which MUST be connected to VCC (Refer to
-- the table below for voltage).
-- GND : Dedicated ground pin, which MUST be connected to GND.
-- GND+ : Unused input. This pin should be connected to GND. It may also
-- be connected to a valid signal on the board (low, high, or
-- toggling) if that signal is required for a different revision
-- of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
-- RESERVED_INPUT : Pin is tri-stated and should be connected to the board.
------------------------------------------------------------------------------
Quartus II Version 6.0 Build 178 04/27/2006 SJ Web Edition
CHIP "graber" ASSIGNED TO AN: EPF10K20RC240-4
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
TCK : 1 : input : : : :
CONF_DONE : 2 : bidir : : : :
nCEO : 3 : output : : : :
TDO : 4 : output : : : :
VCC_INT : 5 : power : : 5.0V : :
TEST : 6 : output : TTL : : : Y
RESERVED_INPUT : 7 : : : : :
RESERVED_INPUT : 8 : : : : :
RESERVED_INPUT : 9 : : : : :
GND_INT : 10 : gnd : : : :
RESERVED_INPUT : 11 : : : : :
RESERVED_INPUT : 12 : : : : :
RESERVED_INPUT : 13 : : : : :
RESERVED_INPUT : 14 : : : : :
RESERVED_INPUT : 15 : : : : :
VCC_INT : 16 : power : : 5.0V : :
RESERVED_INPUT : 17 : : : : :
RESERVED_INPUT : 18 : : : : :
RESERVED_INPUT : 19 : : : : :
RESERVED_INPUT : 20 : : : : :
RESERVED_INPUT : 21 : : : : :
GND_INT : 22 : gnd : : : :
~RDYnBSY~ : 23 : output : TTL : : : N
RESERVED_INPUT : 24 : : : : :
RESERVED_INPUT : 25 : : : : :
RESERVED_INPUT : 26 : : : : :
VCC_INT : 27 : power : : 5.0V : :
RESERVED_INPUT : 28 : : : : :
RESERVED_INPUT : 29 : : : : :
LED_OUT : 30 : output : TTL : : : Y
RESERVED_INPUT : 31 : : : : :
GND_INT : 32 : gnd : : : :
RESERVED_INPUT : 33 : : : : :
RESERVED_INPUT : 34 : : : : :
RESERVED_INPUT : 35 : : : : :
RESERVED_INPUT : 36 : : : : :
VCC_INT : 37 : power : : 5.0V : :
RESERVED_INPUT : 38 : : : : :
RESERVED_INPUT : 39 : : : : :
RESERVED_INPUT : 40 : : : : :
RESERVED_INPUT : 41 : : : : :
GND_INT : 42 : gnd : : : :
RESERVED_INPUT : 43 : : : : :
RESERVED_INPUT : 44 : : : : :
RESERVED_INPUT : 45 : : : : :
RESERVED_INPUT : 46 : : : : :
VCC_INT : 47 : power : : 5.0V : :
RESERVED_INPUT : 48 : : : : :
RESERVED_INPUT : 49 : : : : :
RESERVED_INPUT : 50 : : : : :
RESERVED_INPUT : 51 : : : : :
GND_INT : 52 : gnd : : : :
RESERVED_INPUT : 53 : : : : :
RESERVED_INPUT : 54 : : : : :
RESERVED_INPUT : 55 : : : : :
RESERVED_INPUT : 56 : : : : :
VCC_INT : 57 : power : : 5.0V : :
TMS : 58 : input : : : :
TRST : 59 : input : : : :
nSTATUS : 60 : bidir : : : :
RESERVED_INPUT : 61 : : : : :
RESERVED_INPUT : 62 : : : : :
RESERVED_INPUT : 63 : : : : :
RESERVED_INPUT : 64 : : : : :
RESERVED_INPUT : 65 : : : : :
RESERVED_INPUT : 66 : : : : :
RESERVED_INPUT : 67 : : : : :
RESERVED_INPUT : 68 : : : : :
GND_INT : 69 : gnd : : : :
RESERVED_INPUT : 70 : : : : :
DSP_ADDR[0] : 71 : input : TTL : : : Y
DSP_ADDR[1] : 72 : input : TTL : : : Y
DSP_ADDR[2] : 73 : input : TTL : : : Y
DSP_ADDR[3] : 74 : input : TTL : : : Y
DSP_ADDR[4] : 75 : input : TTL : : : Y
DSP_ADDR[5] : 76 : input : TTL : : : Y
VCC_INT : 77 : power : : 5.0V : :
DSP_ADDR[6] : 78 : input : TTL : : : Y
DSP_ADDR[7] : 79 : input : TTL : : : Y
DSP_ADDR[8] : 80 : input : TTL : : : Y
DSP_ADDR[9] : 81 : input : TTL : : : Y
DSP_ADDR[10] : 82 : input : TTL : : : Y
DSP_ADDR[11] : 83 : input : TTL : : : Y
DSP_ADDR[12] : 84 : input : TTL : : : Y
GND_INT : 85 : gnd : : : :
DSP_ADDR[13] : 86 : input : TTL : : : Y
DSP_ADDR[14] : 87 : input : TTL : : : Y
DSP_ADDR[15] : 88 : input : TTL : : : Y
VCC_INT : 89 : power : : 5.0V : :
GND+ : 90 : : : : :
H1 : 91 : input : TTL : : : Y
GND+ : 92 : : : : :
GND_INT : 93 : gnd : : : :
DSP_ADDR[16] : 94 : input : TTL : : : Y
DSP_ADDR[17] : 95 : input : TTL : : : Y
VCC_INT : 96 : power : : 5.0V : :
DSP_ADDR[18] : 97 : input : TTL : : : Y
DSP[0] : 98 : output : TTL : : : Y
DSP[1] : 99 : output : TTL : : : Y
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -