📄 graber.sim.rpt
字号:
; Generate Signal Activity File ; Off ; Off ;
; Group bus channels in simulation results ; Off ; Off ;
; Preserve fewer signal transitions to reduce memory requirements ; On ; On ;
; Trigger vector comparison with the specified mode ; INPUT_EDGE ; INPUT_EDGE ;
; Disable setup and hold time violations detection in input registers of bi-directional pins ; Off ; Off ;
; Overwrite Waveform Inputs With Simulation Outputs ; Off ; ;
; Glitch Filtering ; Off ; Off ;
+--------------------------------------------------------------------------------------------+------------+---------------+
+----------------------+
; Simulation Waveforms ;
+----------------------+
Waveform report data cannot be output to ASCII.
Please use Quartus II to view the waveform report data.
+--------------------------------------------------------------------+
; Coverage Summary ;
+-----------------------------------------------------+--------------+
; Type ; Value ;
+-----------------------------------------------------+--------------+
; Total coverage as a percentage ; 56.52 % ;
; Total nodes checked ; 182 ;
; Total output ports checked ; 184 ;
; Total output ports with complete 1/0-value coverage ; 104 ;
; Total output ports with no 1/0-value coverage ; 72 ;
; Total output ports with no 1-value coverage ; 79 ;
; Total output ports with no 0-value coverage ; 73 ;
+-----------------------------------------------------+--------------+
The following table displays output ports that toggle between 1 and 0 during simulation.
+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
; Complete 1/0-Value Coverage ;
+---------------------------------------------------------------------------------------------------+-------------------------------------------------------------------------------------------------------------------+------------------+
; Node Name ; Output Port Name ; Output Port Type ;
+---------------------------------------------------------------------------------------------------+-------------------------------------------------------------------------------------------------------------------+------------------+
; |graber|74157:inst11|15 ; |graber|74157:inst11|15 ; data_out0 ;
; |graber|74157:inst11|19 ; |graber|74157:inst11|19 ; data_out0 ;
; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[11]~83 ; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[11]~83 ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[10] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[10]~COUT ; cout ;
; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[10]~84 ; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[10]~84 ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[9] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[9] ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[9] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[9]~COUT ; cout ;
; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[9]~85 ; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[9]~85 ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[8] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[8] ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[8] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[8]~COUT ; cout ;
; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[8]~86 ; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[8]~86 ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[7] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[7] ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[7] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[7]~COUT ; cout ;
; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[7]~87 ; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[7]~87 ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[6] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[6] ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[6] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[6]~COUT ; cout ;
; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[6]~88 ; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[6]~88 ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[5] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[5] ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[5] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[5]~COUT ; cout ;
; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[5]~89 ; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[5]~89 ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[4] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[4] ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[4] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[4]~COUT ; cout ;
; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[4]~90 ; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[4]~90 ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[3] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[3] ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[3] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[3]~COUT ; cout ;
; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[3]~91 ; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[3]~91 ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[2] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[2] ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[2] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[2]~COUT ; cout ;
; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[2]~92 ; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[2]~92 ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[1] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[1] ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[1] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[1]~COUT ; cout ;
; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[1]~93 ; |graber|addr_part:inst8|addr_sec:U2|RAM_ADDR_I[1]~93 ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[0] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[0] ; data_out0 ;
; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|q[0] ; |graber|addr_part:inst8|count19:U1|lpm_counter:ADDRESS_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[0]~COUT ; cout ;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -